1 / 19

Zaher Andrawis Ashraf khoury Intermediate Report Supervisor Hain Brodny Summer 2001

Wireless PC-Peripherals Communication via Blue Tooth (D0130 project). Zaher Andrawis Ashraf khoury Intermediate Report Supervisor Hain Brodny Summer 2001. Project Purpose.

leona
Télécharger la présentation

Zaher Andrawis Ashraf khoury Intermediate Report Supervisor Hain Brodny Summer 2001

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Wireless PC-Peripherals CommunicationviaBlue Tooth(D0130 project) Zaher Andrawis Ashraf khoury Intermediate Report Supervisor Hain Brodny Summer 2001

  2. Project Purpose Wireless communication between PC and its peripherals BlueTooth

  3. Specifications • Communication between PC and a peripheral device through the McBSP serial port of the DSP • Translating the PS/2 protocol from the PC or Device side to the McBSP. The DSP transfers transparently the received bytes Implementation: FPGA board with PS/2 connectors and a connection to DSP DSP program to mirror the data

  4. Specifications (cont) • Board requirements: • FPGA FLEX10K100 Board • EPC2 configuration chip and Jtag Interface • 4 PS/2 Connectors • An interface to 5402 DSP • Debugging pins • Jumpers to enable “McBSP” In/Out “contact” to work-around the DSP! • Power Supply • We aim to check the system “due diligence”, thus voltage and power adjustment of the final “tape-out” less concerns us

  5. Specifications (cont) • FPGA implementation should include 10KHZ PS/2 protocol, and McBSP protocol in the DSP frquency we’ll configure in the future. • Testing will be done by defining the appropriate test-benches in Renoir, And by DSP software… • Equipment requirements: • PC (with LPT + 2 serial ports!) • PS/2 device (keyboard + mouse) • DSK (of DSP 5402) • ByteBlaster parallel port • Digital “scope” for debugging • Jumpers • Vcc/GND supplier (Vcc=5 v !)

  6. Background • Input/Output: • PS/2 : 10KHZ – Start/Data(8)/Stop/Parity bits… (http://panda.cs.ndsu.nodak.edu/~achapwes/PICmicro/PS2/ps2.htm) • PC and Device cannot collide in transmitting/receiving… BUT : Using the wireless broadcast might cause such a collision  The FPGA implementation handles that!

  7. McBSP of DSP: Typically 12.5 MHz The exact frequency is determined by the clock generating method, configured using the McBSP control registers.

  8. PS/2 lines McBSP lines Controller DeviceSide PC DeviceSide=1 DeviceSide=0 Mouse PS/2 Interface McBSP Interface DSP DeviceSide=1 DeviceSide=0 Keyboard Functional Blocks

  9. Hardware – The whole System

  10. Hardware – FPGA Board FPGA Board PS/2 connector PS/2 connector FPGA for PC for Devices PS/2 connector PS/2 connector Jumpers for McBSP “contact” DSP Interface

  11. Pin-to-Pin Proposal Map

  12. FPGA of ALTERA • FLEX10K100: • Supports Peripheral connection • 10 MHz clock • Relevant Configuration Device is EPC2, or 2 EPC1s ! For the moment we’ve designed the system for one EPC2. • Dev’ Software: Renoir 2000 ModelSem+Leonardo, MaxPlusII

  13. Translation Blocks in a nutshell Compiles Hierarchaly with 0 Errors! FR FX CLKR CLKX DR DX

  14. Main Controller • 2 FSMs for controlling PS/2 and McBSP units, and samples their status • Handles Collision (possible !!)

  15. Reminder Interface – Example: PS/2

  16. Reminder Interface – Example: PS/2 (cont)

  17. Software • In part A we are requested to “work-around” the BT: • Translate PS/2 to McBSP and vise versa • DSP mirros the input to the output: • We assume the McBSP API is ready… • While(TRUE){ • a = getchar(A1) • putchar(A2) • }

  18. Software / Testing • The above program tests the PS/2-to-McBSP-McBSP-to-PS/2 ! • Alternative testing for the McBSP only is : • OnceInAWhile(){ • putchar(a,A2); • a’=getchar(A1); • “Shout()” if a’!=a • }

  19. Schedule • 30.8 (this week)– Finish pin-to- pin scheme and send board for start-up… • 6.9 (next week)– Finish test benches, with successfully working Renoir modules • 13.9 –Controlling/understanding DSP software and building the required tests. • 13.10 – Testing the ready (hopefully!) FPGA board: We should type a char in the keyboard, or move the mouse, and see the effect on the connected PC, when data goes through our FPGA + DSP !

More Related