1 / 30

Graduation Project 2 Mechanical Systems For Al-Zakah Hospital Students:

Graduation Project 2 Mechanical Systems For Al-Zakah Hospital Students: Mohammed Sawalhi ( 10840740) Mohammed Younis ( 10824906 ) Mohammed Hannon (10822899) Nedal Al-Masri ( 10823665) Aya Nairat (10821417) Supervisor: Dr. Iyad Assaf. Introduction:.

lexine
Télécharger la présentation

Graduation Project 2 Mechanical Systems For Al-Zakah Hospital Students:

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Graduation Project 2 Mechanical Systems For Al-Zakah Hospital Students: Mohammed Sawalhi (10840740) Mohammed Younis (10824906) Mohammed Hannon (10822899) Nedal Al-Masri (10823665) AyaNairat(10821417) Supervisor: Dr. Iyad Assaf

  2. Introduction: In our project, we are going to Design the following Mechanical systems for Al Zakah hospital in Palestine-Tulkarm which consists of 7 floors two of them under the ground : 1- HVAC System “Heat, Ventilation & Air conditioning” 2- Plumbing System 3- Fire Fighting System 4- Medical Gases System.

  3. Building’s Description • Country : Palestine / West bank . • City: Tulkarm. • Street Al-Montaza street . • Latitude: 31.9 • Building face sits at south orientation. • The wind speed is greater than 5 m/s

  4. Heating load Equations • Qs,cond= U A (Ti – To) . • Q s,vent = 1.2 Vvent (Ti – To). • Q L,vent = 3 Vvent (Wi- Wo). • Qtotal = Qs,cond+ Qs,vent+Ql,vent

  5. Heating Results:

  6. Boiler selection • Boiler capacity = (Q building + Q domestic hot water) * 1.1 = (209.137 + 232) * 1.1 = 485.25 KW • we select boiler model: FM500 that gives power = 500 KW

  7. Cooling Equations: • Qs = U * A * CLTD corc. For Wall And Ceiling. • CLTD corr = ( CLTD + LM ) K + ( Tin -25.5 ) + ( To – 29.4 ). • Qs|transmitted = A * SHG * SC * CLF . From glass • Qs| convection = U * A * ( CLTD ) correction. From glass • Qs|vent = 1.2 *A * ( To – T in ) . • QL = 3 * A ( W o –W in ) • Qs| people = qs * n * CLF • QL| people= ql* n • Qs| lighting = W * CLF • Qs| equipment = qs * CLF • Ql| equipment = ql

  8. Cooling Results

  9. Chiller Selection • Q chiller = Q cooling for building * 1.1 = 515.6891 KW = 147.34 Ton Refr. • From the Petra catalogue according to the following data: • Ambient temperature = 95 (Fo) • Leaving chiller water temperature = 45 (Fo) • Q chiller = 147.34 Ton Ref. • Frequency = 50Hz

  10. Air Handling Units Selection From Petra catalogue:

  11. Fan coil selection: From Petra catalogue As example: Doctor Room1 at ground floor

  12. Fans selection:

  13. Pumps selection: Chiller Pump From Salsmon catalogues: m pump = 20.56 (L/s ) & ΔH = 7.8m >> ΔP = 76518 Pa L total= L to the farthest diffuser * 2 * 1.5 = 204 m (ΔP/L) = 375 (Pa/m) Where 200 < (ΔP/L) < 550 Model No. 80-160 from Salsmon catalogues Boiler Pump From Salsmon catalogues: m pump = (Qs)/(Cp * ΔT) = 3.75 (L/s) m pump = 3.75 (L/s) , ΔH = 7.1m >> ΔP = 69651 Pa L total = 204 m (ΔP/L) = 341.1 (Pa/m) Where200 < (ΔP/L) < 550 Model No. 40-160 from Salmson catalogues

  14. Duct Sizing

  15. Steel Pipes Sizing

  16. Plumbing Results Potable water Sizing “Steel Pipes”:As an Example for 3rd Floor:

  17. Potable Pump Head (ΔP) pump = (ΔP) friction + fitting ± (ΔP) head + (ΔP) flow • Where: - (ΔP) friction + fitting = 1.8 * (ΔP) friction > (ΔP) friction = (ΔP/L) AB * LAB + (ΔP/L) BC * LBC + (ΔP/L) CD * LCD - (ΔP) friction + fitting = 12.726 kpa - (ΔP) head = ρ * g * H = -29.4 Kpa - (ΔP) flow = 15*6.8 = 102 Kpa (ΔP) pump = 85.32 Kpa Flow rate |Pump = 8.94 L/s

  18. Drainage System: • At each number of fixtures we find the diameter size from tables. Main Results :Horizontal branch diameter: 4" Riser diameter: 4" Building drain diameter: 4" Building drain slope: 1%

  19. Fire Fighting System . In this project, we used 1 landing valve and 1 cabinet for each floor: • Cabinet: Residual pressure = 65 PSI Size = 1½" • Landing valve: Residual pressure = 100 PSI Size = 2½" • Stand pipe diameter = 4" • Pump flow rate = 500 g.p.m • Tank volume = ((Flow rate * 3.8 * t) / (1000)) = ((500*3.8*120)/ (1000)) = 228 m3

  20. Fire Fighting Pump head (ΔP) pump = (ΔP) friction + fitting ± (ΔP) head + (ΔP) flow Where: - (ΔP) friction + fitting = 1.5 * (ΔP) friction > (ΔP) friction = (ΔP/L) AB * LAB + (ΔP/L) BC * LBC + (ΔP/L) CD * LCD… - (ΔP) friction + fitting = 33.289548 kpa - (ΔP) head = ρ * g * H = 1000* 9.81* 3 = -29 Kpa - (ΔP) flow = 100*6.8 Kpa = 680 kpa (ΔP) pump = 684.289 Kpa Jockey Pump Flow rate = (5 – 10) g.p.m (ΔP)Jockey pump = (ΔP) pump + (10 PSI* 6.8) = 500.6175 kpa

  21. FM-200 system: • Mass of clean agent: M = (V/S) [C / (100 – C)] • Leakage rate: Leakage rate = 0.608 * Pc (8.7) > Pc = g * Ho * (rm – ra) • Results :

  22. Volume of FM-200 Cylinder: • Weight = (ρ * g * Volume) • Total mass * g = (ρ * g * Volume) • Volume = (Total mass/ ρ) = (398.682/100) = 3.98 m3

  23. Medical Gases Results As an Example for 3rd floor:

  24. Medical Gases Volume of cylinders for each gas: 1- Oxygen gas: 54.5 SCFM >> 24.77 (L/s) >> 0.02477 (m3/s) 2- Medical vacuum: 92.5 SCFM >> 42 (L/s) >> 0.042 (m3/s) 3- Medical air: 7 SCFM >> 3.1 (L/s) >> 0.0031 (m3/s)

  25. ThankYou

More Related