1 / 12

Pregled raspolo živih tehnologija i biomaterijala pogodnih za brzu izradu prototipova

Pregled raspolo živih tehnologija i biomaterijala pogodnih za brzu izradu prototipova. Mr Jelena Milovanović. Direct Metal Laser Sintering -DMLS ( Direktno lasersko sinterovanje metala ). DMLS -EOSINT M270. Materijali. EOS Titanium Ti64 / Ti64ELI EOS CobaltChrome MP1. Electron Beam Melting.

lexine
Télécharger la présentation

Pregled raspolo živih tehnologija i biomaterijala pogodnih za brzu izradu prototipova

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Pregled raspoloživih tehnologija i biomaterijala pogodnih za brzu izradu prototipova Mr Jelena Milovanović

  2. Direct Metal Laser Sintering-DMLS(Direktnolaserskosinterovanjemetala)

  3. DMLS-EOSINT M270

  4. Materijali • EOS Titanium Ti64 / Ti64ELI • EOS CobaltChrome MP1

  5. Electron Beam Melting

  6. Materijali • ASTM F75 CoCr legura • Ti6Al4V Titanium legura • Ti6Al4V ELI Titanium

  7. Biomaterials for 3D printing • commercialized composite powder materials. • Bone replenishment is formed by mixing PMMA (polymethylmethacrylate) and fine granule of bone cement • The ready bone cement is a compound consisting of 90 % ofpolymethylmetacrylate, (PMMA), the rest are mainly crystals of barium sulfate or Zirconium oxide .

  8. Biomaterials for 3D printing • Three-dimensional printing (3DP) technique was used to fabricate scaffolds in combination with natural polymer and water based binder. • a unique blend of starch-based polymer powders (cornstarch, dextran and gelatin) was developed for the 3DP process.

  9. Biomaterials for 3D printing • Used material: spaydried Hydroxyapatite(HA)-granulate named V5 • Besides the main component HA it contains polymeric additives to improve bonding and flowability • As a binder we used Schelofix which consists of water soluble polymeric compounds

  10. Biomaterials for 3D printing • Used material: developed a powder mixture comprising tetracalcium phosphate(TTCP) as reactive component and β-tricalcium phosphate (β –TCP) or calcium sulfate as biodegradable fillers, • Conventional 3DP eqipment can be used to print this material with an aqueous citric acid solution as binder. • No organic solvents are needed in the printing process.

  11. STUDY 5 - Biphasic Calcium Phosphate/Poly-Dl-Lactide-Co-Glycolide Composite Biomaterial as Bone Substitute • Prof dr Dragan Uskoković i Prof. dr Nenad Ignjatović • Sinteza nanokristalnih i nanostrukturnih kalcijum fosfata i kompozita za rekonstrukciju koštanog tkiva predstavlja osnovno polje istraživanja dela grupe za nove materijale i procese Instituta tehničkih nauka Srpske akademije nauka i umetnosti (ITN SANU) u Beogradu.

  12. HVALA NA PAŽNJI !!!

More Related