1 / 0

Mike Cundiff Commercial Regional Manager

Controls Integration and Training. Mike Cundiff Commercial Regional Manager. Required Hardware. LonWorks. BACnet. Operation: On/Off, Mode, Set Temperature, Fan Speed, and Air Flow Direction Monitor: Status, Error Code, Error Unit Address, Filter Sign, and Malfunction Log

liang
Télécharger la présentation

Mike Cundiff Commercial Regional Manager

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Controls Integration and Training Mike Cundiff Commercial Regional Manager
  2. Required Hardware LonWorks BACnet Operation: On/Off, Mode, Set Temperature, Fan Speed, and Air Flow Direction Monitor: Status, Error Code, Error Unit Address, Filter Sign, and Malfunction Log Prohibit: On/Off, Mode, Set Temperature, and Filter Sign Emergency Stop Note: All Points are for Indoor Units.There are no points for Outdoor Unit, BC Controller, or Central Controller
  3. Programming Required LonWorks Mitsubishi: Make sure dipswitches are properly set on LMAP BAS Contractor: Status, Error Code, Error Unit Address, Filter Sign, and Malfunction Log Backup: Configuration of the LMAP is stored in permanent memory. Reconfiguration is done with dip switches. Configuration will not be lost unless cleared with dip switches.
  4. Programming Required BACnet Mitsubishi: Initial BAC-HD150 setup using free, internet available software tool. BAS Contractor: Status, Error Code, Error Unit Address, Filter Sign, and Malfunction Log Backup: Configuration is kept in permanent memory. Reconfiguration is done with software and saved configuration file. Configuration will not be lost unless reconfigured with software tool.
  5. Estimated Cost Mitsubishi: Cost of BACnet or Lon gateway, etc. BAS Contractor: Project Specific
  6. Commissioning Mitsubishi Controls: Installing contractor with factory authorized service personnel assistance. BAS System: Project Commissioning Agent
  7. Project Examples Allied Health Bldg- LWTC Tioga Library UW Additional Schools: UW Savery Hall – JCI UW TransBldg – JCI UW Joy Bldg – Siemens Seattle Pacific U Carnation Elem – Alerton Tolt MS – CCI Cherry Valley Elem – Alerton Stillwater – Alerton Bremerton H.S. Bethel S.D. Sitka SD – Alerton Kirkland, WA Alerton Integration Controlled locally by campus facilities 280 Tons 85 Zones Tacoma, WA Siemens Integration Connected to UW campus 45 Zones
  8. Software Updates and Backup Software Updates: All updates will be made available for free on the www.mylinkdrive.com website with instructions and all relevant information. Updates will be able to be performed without needing special parts or software that are not available for free on our website. Back-Ups: Backup configuration file can be saved by the staff in any place that is safe. Software to load the configuration file is available for free on the www.mylinkdrive.com website with instructions and all relevant information.
  9. Mitsubishi Controls - Scheduling Holiday Scheduling: Up to 50 days per year, such as public holidays can be scheduled as days that are different than the weekly schedule up to 24 months into the future (including the current month). 5 seasonal weekly (Monday through Sunday) schedule settings are possible.
  10. Non BMS - Programming Programming ability: On/Off, Mode, Fan Speed, Set Temp, Prohibits/Permits Daily / Weekly / Annual Schedule Weekly: 12 programs per day, one for each fan coil/group Annual schedule out 2 years 5 Patterns (Program Sequence) Annual Schedule Web Browser Screen
  11. NW Regional Training Mitsubishi Authorized Training Center Tacoma, WA
More Related