1 / 9

Webtrain Decoupling

Webtrain Decoupling. Adam Kadolph EE451 Bradley University Advisors: Dr. Irwin, Dr. Schertz. Week 15 Monday 4/2. Outline. Last Week Current Week Calibration Program Autodecouple Program. Last Week. Code Calibration Program Set voltage thresholds for specific sensor

lisawhitney
Télécharger la présentation

Webtrain Decoupling

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Webtrain Decoupling Adam Kadolph EE451 Bradley University Advisors: Dr. Irwin, Dr. Schertz Week 15 Monday 4/2

  2. Outline • Last Week • Current Week • Calibration Program • Autodecouple Program

  3. Last Week • Code Calibration Program • Set voltage thresholds for specific sensor • Integrate with Main program • Test function coded within

  4. Current Week • Finish Calibration Program • Some more coding • Test and Debug program • Start Autodecouple Program • Finish stage 1 by end of week • Test program

  5. Timeline

  6. Calibration Progam • Almost done coding • Test one sensor before all four • Set up hardware for it • A/D channels 0-3 are for sensors BL,BR,ML,MR • Sensors are labeled on layout

  7. Autodecouple Program • Start and Finish Stage 1 of 3 • Stage 1 – remove cars after desired one • Stage 2 – remove desired car • Stage 3 – put train back together • Each stage has two parts • Part A is before the decoupler • Part B is after the decoupler • Pause when switch needs to be flipped • Keypress to begin next stage

  8. Potential Problems • Timing issues when using A/D converter and setting up DCC signals together • Keypress to resume autodecoupling operations • Developing the Calibration Program in a way to make it a one time use • Train speed and photocell’s rate of light detection

  9. Questions? The End

More Related