1 / 7

RF Waveguide & Structures C.E. Rago / SLAC LCLS Linac Ron Akre & Peter McIntosh December 2003

RF Waveguide & Structures C.E. Rago / SLAC LCLS Linac Ron Akre & Peter McIntosh December 2003. S-Band Waveguide Modifications Shortened DLWG Structures X-Band Compression Section S-Band Transverse Structure. S-Band Waveguide Modifications.

louie
Télécharger la présentation

RF Waveguide & Structures C.E. Rago / SLAC LCLS Linac Ron Akre & Peter McIntosh December 2003

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. RF Waveguide & Structures C.E. Rago / SLAC LCLS LinacRon Akre & Peter McIntoshDecember 2003 • S-Band Waveguide Modifications • Shortened DLWG Structures • X-Band Compression Section • S-Band Transverse Structure C.E. Rago, SLAC LCLS Linac

  2. S-Band Waveguide Modifications • Reconfigure S-Band Waveguide for LCLS / HEP Operations • 5 Functional LCLS Systems • L1, BC1, L2, BC2, L3 • Single Design Approach • Top Design Priority • Reroute / Remove S-Band Waveguide & DLWG Structures as per Woodley Note • Establish common form for LCLS Functional Assemblies (Installation DWGS) • Correct & Update Linac Schematics C.E. Rago, SLAC LCLS Linac

  3. Shortened DLWG • Modify Length of 2 Standard DLWG Structures • Previously done for SLC by MFD (Early 80’s) • Design and some control documents have been retrieved. • Fixtures and setups probably lost. • Process Outline • Review, establish, and document RF requirements • Identify DLWG to be modified (RF Test) • Develop an updated manufacturing plan • Manufacture, Assemble, Post Process & Test C.E. Rago, SLAC LCLS Linac

  4. X-Band Compression • Process Outline • Review, establish, and document RF requirements • Develop a site layout • Klystron • System Window • Penetration Waveguide • Beamline Components • Identify a surplus 60 cm NLC 20:30 Mv/m Structure. • Develop an updated Manufacturing/Procurement plan • Manufacture, Assemble, and Post Process & Test C.E. Rago, SLAC LCLS Linac

  5. X-Band Compression Cartoon C.E. Rago, SLAC LCLS Linac

  6. X-Band Compression Cartoon C.E. Rago, SLAC LCLS Linac

  7. S-Band Transverse Structure Existing Component @ 29-4 C.E. Rago, SLAC LCLS Linac

More Related