1 / 22

pdf file 3d printer

pdf file 3d printer

luai
Télécharger la présentation

pdf file 3d printer

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 。 WPrint WPrint User Guide User Guide

  2. WPrint User Guide Catalog Catalog .................................................................... 1 Introduction ............................................................... 2 Chapter 1 Software installation ............................................ 2 1.1 Select computer ....................................................2 1.2 Software installation ............................................... 2 Chapter 2 Software settings ................................................ 3 2.1 Parameter settings .................................................3 2.1.1 General items ..................................................3 2.1.2 Color management settings ............................... 3 2.2 Printer Setup..................................................... 4 2.2.1 Printer setup ............................................ 4 2.2.2 Printer paper feed calibration .......................... 5 Chapter 3 Page Layout Editor .............................. ................ 7 3.1 Page Setup ................................................. 8 3.2 Import image ............................................... 9 3.3 The Layer Tab and use toolbar .............................. 11 3.4 Layout edit operation ...................................... 13 3.5 Layout storage ............................................. 16 3.6 Printing ..................................................... 16 Chapter 4 Print Work Template Preset ....................................... 17 Chapter 8 Other............................................................. 20 8.1 Image display .............................................. 20 8.2 Image processing ........................................... 20 8.3 Printed job management .......................................... 21 1

  3. WPrint User Guide Introduction Introduction WPrint software is an innovative software product, it has the following characteristics: Single nozzle to multi-layers print. This technology can be used to achieve multi-layers print by a single nozzle printer, such as white ink colors to play with, playing with white ink color varnished, multilayer thick print and so on. Advanced FM network color printing mode. Nozzle ink distribution system. It can be useful to avoid the damage of color ink channels. ICC color management system. The manual will show you how to install the software WPrint initial setting, and focus using the method described interface. Chapter 1, Software Installation Chapter 1, Software Installation 1.1 Select Computer 1.1 Select Computer WPrint software is an image processing software, and therefore need a computer with larger memory and faster computing speed. In order to increase computing speed, WPrint using the optimization algorithm for parallel processing, the multicore computing processor can play a huge effect, we recommend using the 4-core processor PC, installed memory greater than 2G, and using a 64-bit operating system better. WPrint software work under WindowsXP, Windows7 system. 1.2 Installing the software 1.2 Installing the software WPrint software CD installation disc and dongle. At first insert software's protection dog into the USB port, and CD disk into the CD-ROM drive (CD-ROM). General installation program will run automatically pop-up 2

  4. WPrint User Guide dialog box. Otherwise, select the CD-ROM drive and double-click SETUP.EXE pop-up dialog box when the installation program begins execution. Then the dialog box prompts to complete the installation step by step. WPrint is properly installed on the computer desktop, double-click the the WPrint shortcut icon, or click the [Start] menu button, in the pop-up [start] menu, click [Programs] / [WPrint] command to start the WPrint software. Chapter 2 software settings Chapter 2 software settings 2.1 parameter settings 2.1 parameter settings 2.1.1 General entry 2.1.1 General entry In the "File" menu, select "Preferences/General" general preferences dialog box pops up, as shown in this dialog box, you can set the following parameters: * "Temporary folder" * "length Unit" * "Resolution Unit" * "Preview Resolution", Layout Editor preview resolution. * "Interpolation Method" for image interpolation. * "Max Memory Size", the software use the largest block of memory. * "Default font" * "PS RIP Max Resolution" automatically select the RIP resolution maximum. * "Space between Sparation Page ", the distance between each color separation paging. * "Skin". The optional Window's skin or YouPrint's Custom skin. Skin changes must next time you start to take effect. 2.1. 2.1.2 2 Color management settings Color management settings WPrint software equipped with ICC color management system for all kinds of images in the software color 3

  5. WPrint User Guide display conversion and output device color matching of the system. Here's dialog box, you can set the monitor's ICC color profile, RGB ICC color profile and CMYK ICC color profile, and the match methods between them, In the "File" menu, select "Preferences/Color Management", "Color Management" dialog box pops up, as shown in the figure. The parameters set here as the default parameters, the software in the color conversion is performed in accordance with them. 2.2 Printer Setup 2.2 Printer Setup 2.2.1 Printer setup 2.2.1 Printer setup In the "File" menu, select "Printer Setup" pop-up "the printer setup dialog box, as shown in the figure. Before using the software, install the printer driver to use. Before using the software to print, the installed printer must be preselected with this dialog box, and then you can print by software. Preselected printer settings will be saved to the software has been effective, unless required to change, otherwise do not have to reset. In addition, this dialog box, you can also set the following parameters about printing. Click on the left button of the drop-down list to open a dialog to select a printer. * Optional setting of ink location in the drop-down list: “Normal”: Epson original machine ink level. “Dub ink”: double ink printing press-specific ink level. Others are specially set ink level is usually used in some tablet printers or used in the nozzle some damage. * Click on the right button to open a sub-dialog, you can make the following settings: "Black ink set for Epson 7908/7910 and 9908/9910 type machine. Check the "Auto cleaning", set the number of square meters per print, print nozzles cleaned once. 4

  6. WPrint User Guide * "Distance between page", Continuous Print page pitch, at least 1 inch. 2.2.2 Printer feed speed calibration 2.2.2 Printer feed speed calibration Feed speed of the printer should print nozzles to match perfectly, the speed is controlled by the feed pressure wheel stepping parameters. However, since the frictional force of the printing material is different, the different materials in the different printing mode, the speed of paper feed caused by the same stepping speed of the feed pressure wheel (the same stepper parameters) are different. In order to obtain the optimum feed rate must be measured quasi-stepping parameters. Usually the same printer printout accuracy / Print mode / printer feed method / printing media will produce different stepper parameters, even for the same kind of printing media and two different sizes of products printout under the same conditions, will also produce different stepper parameters. Printer paper feed speed imbalance will cause the inkjet point of confusion, resulting screen interference, even when serious apparent size error. This parameter is essential for the print quality. WPrint provides the accurate method of testing stepper parameters in different print modes. Select Tools/Printer Media Feed Calibration, if more than one printer, the printer will pop up a printer selection dialog box, select the test one(such as a printer, does not have this step), pop-up Figure shown Feed Adjust Test dialog box. In this dialog box, the following parameters need to be set. * "Printer resolution", according to the actual situation in the drop-down menu, select the print accuracy. * "Ink Mode", the ink inkjet method of printer, software offers two modes of Single and double ink mode. * "Nozzle usage, under normal circumstances should be 100%, and is 100% of the default. * "Roll Paper Tension", this is for Epson 7900/7910/9900/9910 types printer. * "Feed Adjust", given to test stepper parameters, such as the value 120. 5

  7. WPrint User Guide * "Test length", the length of the image of the specified print test. The longer the length of the test chart, the result will be more accurate. More needs to be calibrated to 20 inch in the general case as well. Generally concluded on the calibration of small length (8inch) in order to save time and calibration test printing supplies, then this is a benchmark for longer test chart print. Click OK, enter "Print Setup" dialog box, click on the "Detail"/"Hide Details" button, as shown in the figure. In this dialog box, the following parameters are adjusted according to the situation. * Page start position * "Media Path", roll or manual. * "Black", black ink selecting. Click the "OK" button to begin printing stepper test chart. The stepper test chart is shown in Figure shown on the right. Stepper test chart width of 1 inch, and the longitudinal direction on both sides of a vertical bar, respectively, between the two vertical bars, a bundle of horizontal line, the number and spacing of the horizontal line with the print mode becomes. With careful observation, each horizontal line is actually a horizontal line in the middle by about two docking formed, and one side of a line with a black line segment. In order to facilitate the interpretation of the two horizontal lines in a black segment of the cord known as the A-line, the other is called the B line. Observed two horizontal line in the middle of the docking at with a magnifying glass (greater than 20-fold), as shown on the right as shown. Since magnifier may but rather also may not but rather, and the test chart placed in a different direction, through a magnifying glass to see may be different with the direction of the schematic. But that does not matter, because 6

  8. WPrint User Guide only their relative positions is important. Observed through a magnifying glass, the A line, B line only three cases, on the left side of Figure, shown in the following figure. (1) B-line bias the black side of the line segment of A-line (above), which showed that the feed rate is small, stepping parameters is small, the need to increase the step parameters and then re-measured. (2) B line bias without black side of the line segment of A-line (mid), which indicates that the current feed speed is too big, that stepping parameter is too large, the need to reduce the stepping parameters and then re-measured. (3) B line exactly aligned with the A-line (below), which shows that the current feed speed just stepping parameters is accurate. Check all A, B line above, and adjust the stepping parameters to print test chart until the A, B alignment so far, to find the accurate value of the parameter. Note that due to the start of the paper feed, and within a short distance, the printer does not stable, and therefore it is not accurate to the foremost step within a distance of about 2-3 inches diameter, so at this distance of A, B line reference value, should prevail after this. Chapter Chapter 3 3 Page Layout Editor Page Layout Editor In the "File" menu, select the "Page Editor", layout window pops up, as shown in the figure. 7

  9. WPrint User Guide The Page Editor consists of 5 parts: (1) Control of leaf edition It consists of two pages: 1, Page: it can set the parameters of the layout pages. 2, layer: it can be controlled and layout unit(images) parameters. (2) The toolbar Select Edit tools and state. (3) Menu Call some of the command. (4) The ruler Indicating the size of the work area and units. (5) the work area Layout editing area. Let's turn will be based on the work order describes the use of the layout. 3 3.1 Page Setup .1 Page Setup Before layout, page settings. Choose a layout page, shown in the control page board as shown in Figure. The page box, you can use the "width" and "height" the items freely set the size of the page, and the page area and ruler marked blue box in the work area will also change. For frequently used page size can be stored to the "Settings" drop-down table. Select "Custom" in the "Settings" drop-down table, a dialog box will pop up, and that will be taken in the name of the upcoming current size parameters stored in the name. In the "Settings" drop-down list to select the desired item, size can be set to the stored value. On the page box, you can also set the output resolution and color mode of the page. Color modes: color (CMYK), black and white gray scale (Gray) mode and 1bit mode (only 3D prepress version). Color (CMYK) and black and white gray scale (Gray) mode, different input color will be converted by the color management system automatically set into the page color mode. But on 1bit bitmap mode, the input must 1bit bitmap. 8

  10. WPrint User Guide Check "Add Frame", the edit page automatically given the output of chromatic border. The software provides several different border styles for selection. Frame the standard position as the edge of the page, using the "Position" selectable preset drop table border location. The default border location custom items, select "Frame Pos." drop-down table will bring up a page anchor tag margins Settings "dialog box, in this dialog box to set the size and location of the border, and was named save. 3 3.2 Import Image .2 Import Image In the "File" menu, select "Import/Import Image" pop-up "Open" dialog box to select the files, as shown in the Fig. Color (CMYK) and black and white gray scale (Gray) mode, you can see the type of file that can be introduced in the File Type drop-down table: TIFF, JPG, EPS, PS, PSD, PDF, YPD, YVD, YLD When PS, PDF or EPS file is opened, the "PS/PDF/EPS import" dialog box will pop open as shown in the Fig. In this dialog box, you need to set: * "Color mode" refers to the color mode of the input file, are summarized as follows: "Gray Level" black and white gray scale. "CMYK (4 Color)" CMYK 4-color "CMYK Separation" CMYK color separation (CMYK separations to 4 pages); * Check the "automatically selects the resolution" by the software automatically set a reasonable resolution of RIP (maximum value set in the parameter setting "general items" dialog box, see 2.1.1 General items). Of course, it can also be set manually, but note that the higher the resolution, the greater the resources required, the longer the computation time. * When multiple page PDF files, optional output all pages or which part of the page. 9

  11. WPrint User Guide When the setup is complete, click OK button to begin RIPing the file and then open it. When the YPD or YVD file is opened, it will pop up a dialog box as shown. The YPD or YVD document the contents of a page layout (see 3.5 typesetting layout storage) To set YPD file to replace the current page settings, answered "yes", otherwise the answer is "No". After the file is opened, except YPD or YVD, will pop up the "Import Image Setup" dialog box, as shown. In this dialog box, we can introduce file for the following settings: (1) The size of the image Select "Hold original size" will remain the original file size. Select "change size to" and set up a new dimension to the "width" and "height" items, will be able to change the original file size. (2) Image type The type of image can be imported in the Image Type drop-down table. Here may be the type of image. * “Normal” Traditional single frame plan. * “Back Mask” There is only white ink printer settings apply. It corresponds to the white ink image should be a monochrome gray image, the greater the gray, white ink thicker. * “Back Mask2” There is only applicable Varnish printer settings. It corresponds to the image of light oil, should be a black and white gray scale image, gray bigger, thicker coatings. (3) Add Back Layer When the image type is "normal image", check the "Add Back Layer" can be automatically added to the imported image a back mask. Dialog box as shown. 10

  12. WPrint User Guide Drop-down list on the left side of the optional way to generate back mask: back mask is from the introduction of a reverse image of the gray-generated diagram, "L x%" represents perhaps the most shallow gray underlay value. "Depth 100%" is the underlay 100% gray, the image does not change with the introduction of changes. Optional back mask size right drop-down list, -x than the inner periphery of the back mask indicates the imported image compression x pixels. 0 for the two image same size. 3 3.3 The Layer Tab and use toolbar .3 The Layer Tab and use toolbar Layout editing tool is mainly composed by the Page Tab, layer Tab and toolbar, as shown in the figure. Layer Tab containing a layer list, which in turn shows all units on layout page (including images, graphics, text). The vertical sequence represents the order of from inside to outside of the elements, the unit of the outer layer will cover the same 11

  13. WPrint User Guide position of the inner element. Layer list to the bottom right of the up and down arrows to control the position of the selected elements to move up and down. Before each element has a display hook option, checked it, this element display, otherwise hidden. The layer propeties box shows the position, size and type of the element selected, while the position and/or dimensions can be locked. The tool bar provides the most commonly used editing tools, including a variety of graphics and text editing tools, as shown in the figure. Toolbar from top to bottom as follows: a straight-line drawing tools, the rectangular drawing tools, circular drawing tools, polygon drawing tools, any curve drawing tool, Bezier curve drawing tools, text tools, drawing tools, fill tools, editing tools, zoom in/out tool. The following is a description of the various tools. (1) To draw a straight line Sometimes, layout page needs to draw some lines logo, you can use the line tool. Select the Line tool and drawing tools in the toolbar and then can use the mouse to pull out a straight line. (2) To draw a rectangle or a circular curve Draw a rectangle and round the curve method is similar to the straight-line drawing, select a rectangular or circular tool, and select the drawing tool, directly draw with the mouse on the page corresponding at the position of a rectangle or a circle. If you need to fill a rectangular or circular blocks of color, you can choose the rectangular or circle tool and fill tool, then select a color in the Color panel, directly drag out a circular blocks of color in the page. (3) To draw a polygon Select the polygon tool and drawing tools, select a color and set the line width, directly with the mouse to draw a number of edges in the layout page, double-click the mouse automatically closed when closed curve. Select the polygon tool and fill tool, the software automatically filled closed curve. (4) to draw any curve Select any curve tool, select a color and set the line width, and then arbitrarily drawn curve directly in the layout page. Each draw action software automatically generates a separate layer. (5) The Bezier curve Select Bezier curve tool, and points out the control points to draw with the mouse in the Layout Editor page. Hold down the Ctrl key and click a node to delete control node, the software prompted a question dialog, click "Yes" to delete a control point. Hold down the the Atl key and point a control node with mouse to be able to 12

  14. WPrint User Guide move the control node. Hold down the Shift key and click the curve, you can add a new node in the original curve. (6) The text tool Select the text tool and drawing tools, click the right mouse button, select new word box in the right-click menu. The software automatically pop up the font settings dialog box, you can select the font, font style, size and color and then click OK to enter characters. (7) The editing tools When you select this tool, images, graphics, text, and other units on the page can be processed by editing operation. (8) to zoom in / out tool When you select this tool, click on the page, and the page display will be enlarged; hold down the Ctrl key and click on the page, the page displays will be reduced. 3 3.4 Layout edit operation .4 Layout edit operation Select editing tools in the tool bar, Available in the work area, to the different elements, performs the following operation. (1) Selection an element In the work area, use the mouse to click on a unit, or mouse click in the Layers list with an element, you can select this element. Hold down the Ctrl key, in the work area, use the mouse to click multiple elements, or click in the Layers list with more than one element, you can select more than one element. Use the mouse to click a space area on the work area or layer list, you can cancel all selections. (2) Copy an element An element is selected, press down the Ctrl and D keys at the same time, you can copy this element, and add it to the lower end of the list of layer. (3) Delete an element Select an element, and use the right-click menu, select "Delete" to delete the currently selected element. (4) To adjust the position 13

  15. WPrint User Guide An unlocked position of the element is selected, the position of this element can be arbitrarily changed using the mouse. To sentinel set position, the position of the specified element into the specified position on the page, can be used to adjust the position function. Use the right-click menu, select "adjust the position" in the pop-up dialog box, the default value is the current position of the top left corner of the element in the entire layout of the page. Dot in the dialog box represents the four corners on the element, the center of the dot represents the center point of the element. When you tap arbitrary one corner or center of an arbitrary, the position of the point in the page will be display, you can fill in the values in the dialog box, the software will automatically complete the adjustment of image position. By accurate calculation of the element size and the distance of the four corners of the page, can achieve a precise positioning of the element on the page. (5) Adjust the size Select the size of an unlocked element, using the mouse can arbitrarily change the size of the element. To precisely set the size, you can use the resize function. Use the right-click menu, select "Resize", in the pop-up dialog box displays the size as the original size of the element selected, fill in the appropriate size. "Hold Ratio" items can make when setting the size, keep the original proportions unchanged. (6) Rotary Select an element, use the right menu, select "Rotate 90 degrees" or "-90 degree" clockwise or counter-clockwise selected element. (7) Image Processing Select an image element, using the right-click menu, select "Image Processing ..." dialog box as shown. In this dialog box, adjust the "Light" and "Contrast", while observing the picture, until satisfied, select "OK" to process the image. 14

  16. WPrint User Guide For reservations this setting, the optional "Settings" drop-down list in the "custom", then named retained to prepare after the selection. (8) multi-elements Group and Ungroup "Group" is to several simultaneously selected elements, combined into one element. For a combined element, the same edit operation can be processed as an element. First select several elements to be grouped together, and then use the right-click menu, select the "Group" to combine them into a new element,. Original units disappears, and the combination of the new element will be added to the lower end of the layer list. "Ungroup" is a combination of element reverts to the original elements. First select a combination of the element, and then use the right-click menu, select the "Ungroup" can it re-factoring. (9) The multi- elements Ordering Arrangement of tools in a multi-elements arranged can complete easily and accurately the multi-unit layout process. First select multiple elements need to be arranged, right-click at an element as the arranged reference element, in the right-click menu, select "Arrangement" will pop up a dialog box as shown. In the image arrangement, one must firstly determine the direction of arrangement, i.e. the relative relationship of the reference element and the other element, the other elements will be arranged in the reference elements which side of the up and down about. The pitch between each two elements, and the elements will be aligned in what manner. After setting the above parameters, click OK, the orderly arrangement of the elements will be done automatically. In addition, in the menu under "Edit", it provides multiple alignment operator that can also align multiple elements. In turn select multiple units need to be arranged, the element finally selected will be as the base element, and then in the menu to select the desired align operator. 15

  17. WPrint User Guide 3.5 3.5 Layout Storage Layout Storage The layout page can be stored for later reopen to modify. Note that in this there are two formats can be used, * YPD format: memory is only connected to each file, and therefore can not change the storage location for all files, or they will not be able to open the layout file, but also for the automatically generated underlay can not be stored. * YVD Format: store all publishing content. Open it can regain the original layout, independent of the presence of the original document. 3 3.6 .6 Prin Printing ting After the layout is complete, you can print out directly. In the "File" menu, select "Print", "Print Setup", the dialog box pops up, as shown in the Fig. Select the "Main" page, according to the need to select the "Printer", "task type" and "work template" and set the print page starting position and the print count. After setting dialog box, click on the "OK" button. The software preset already various print work templates, all specific parameters of the selected template can be seen in the other tab, can be according to the need to modify and direct printing, can also be modified and then save to a new template for later use. About the detail of the print parameter and preset default templates, see "Chapter 4 Print Work Template Preset. 16

  18. WPrint User Guide Chapter Chapter 4 4 Print Print Work Template Preset Work Template Preset The print work template is a general term for a collection of the technical parameters of a print task, it has its own naming. The print template is stored in the "print parameter setting" Paging dialog box “Main" paging “Work Template" drop-down list. “Print parameter settings" paging dialog box as shown in the figure. This paging dialog box, not only can choose to work template for output, and also to preset new templates or modify existing templates, which consists of five pagination: “Main", “Screen", “Print", “Color", “Management". (1) "Main" page Printers must firstly be selected, the templates are belongs to a specific printer models and can not be be mixed with each other. According to the need to select the type of task and work template and output file path. The software has preset the various types of template's output, in the other tab, you can see the specific parameters of the selected template, can also store a modified template to a new template for later use. Setting a new work template is as follows. Firstly choose the one closer to the work of the template in the "template" drop-down table, and then modify the parameters you need in the "Screen" and "output" page, after change, return to the "Main" page "Work Template" drop-down list, select "Custom" items that will pop up a dialog box named, enter the name of the new template, click" OK "to complete the establishment of a new template. If the new template name and has a template the same name, this template will be updated. (2) "Screen" page Screening parameters are introduced one by one as follows. * "Screen type" drop-down list, the type of optional screening: "Square-Round (Rec-Round) AM," Round (Round) AM, FM screening (FM). * "Layer Color" drop-down table, optional layer C, M, Y, and K. Here specified 17

  19. WPrint User Guide layer parameters for this page. * “Screen Resolution" set the screen resolution for each layer (layer color selection). * “Screen angle" can be set to screen angles corresponding to each layer (layer color selection). * “Level Adjust" drop-down list, adjust the intensity distribution of the deviation. * "Col saturation " drop-down list, adjust the maximum deviation of the amount of ink color saturation. * "White level" drop-down list, adjust the maximum deviation of white ink depth. * "Curve" drop-down list, only Professional Edition can use it to select the required screening curve. * Curve Settings" button, only the Professional Edition has, plus it can be used to create a new network profile or modify the selected screening curve. (3) "print page This page is involved in the printer parameters. * "Printer Resolution" drop-down table optional printer resolution. Depending on the printer, this may have the "1440x1440", "720x1440", etc... * "Media Path" drop-down table optional the material feed method. Depending on the printer, it may have "manual feed paper", rolls paper", etc... * "Feed Adjust" and "Feed Offset" it can be set to different feed speed. It is different due to the frictional force of the printing material, therefore the different materials, in the different printing mode, all may have different stepping parameters. This parameter is essential for the print quality. How to determination of this parameter, see 2.2.2 printer feed speed calibration. * "Gap" drop-down table can be set to the height of the nozzle. * "Speed" drop-down table, depending on the printer, it may have four options: "Normal", "2 Speed (bi-directional printing)", "2 Speed (dual-ink printing)", "4 Speed 18

  20. WPrint User Guide (two-way ink print)". * "Black" black ink select drop-down list, you can choose to install black ink from the different ink position. * "Saturated ink" refers to single ink case, the material is just saturated with ink value, above which the material will be in a strong state of supersaturation. It ranges from 0 to 100%. * "Total Ink" refers to the maximum total amount of ink material can withstand, and its range of 0 to 400%. * "Edge Adjust", (effective only for certain AM network printing) black edges of the image may be increased or decreased (as points). It is typically used to adjust the fine edge of the black and white part of. * "Pass Smooth", select stepping degree of smoothing, 0 is no. Stepping smooth, the larger the number, the higher the degree of smoothing. * "Roll Paper Tension", is only valid for models that support this feature. (4) "Color" page * ICC Profile settings An ICC color profile can be selected in the "Color Profile" drop-down table to select for the desired output, if not necessary, election “Non profile”. From "Rendering intent" drop-down list, select a color match method. * "Reserve Black" the single black in four-color maps can check out, after a color management system is still a single black. * " Reserve Color" the monochrome color in four color maps can check out, after management system is still monochrome color. * "Layer Order" Select what order "back mask" (white ink or varnish) are printed. (5) "Management" page 19

  21. WPrint User Guide Because the more often stored template, in the drop-down list, select inconvenient, so we will hide the templates not be used, and tune back them when it's usefull. This page is designed for this purpose, the two lists show the "template" and "hidden template", which can move relative to each other. Around two in the list, select the items that need to be moved, click the arrow in the middle to complete the move. Chapter Chapter 5 5 Other Other 5 5.1 Image display .1 Image display The software provides an image display system. In the "File" menu, select "Open" and an open dialog box pops up, as shown in the figure. Use this dialog box, select one or more image files open at the same time. It supports common TIFF, JPG format and RGB, CMYK, Gray color mode. Open image can be enlarged/reduced and displayed. Right-click on the image for a pop-up image information window, image type, size, color mode, resolution and file size information for you. Click this window to close it. 5 5.2 Image processing .2 Image processing WPrint provides a simple image processing platform, on this platform, the following image processing. * Image brightness, contrast, color saturation adjustment. * Image sharpening, soften. * Image rotation and mirroring. * Transform the image size. * Image cutting. * Image color mode conversion. Image processing functions are very simple, not go into details here. 20

  22. WPrint User Guide 5.3 Management 5.3 Management of of print printed ed job jobs s Several last printed tasks can be retained. The number of tasks can be arbitrarily chosen to retain the printer settings dialog box. From the "File / printed job" open the “Printed Job” window, as shown. The reserved tasks can be previewed or reprint. 21

More Related