1 / 25

Safety Talk use of abrasive wheel

Safety Talk use of abrasive wheel. Use of abrasive wheels. Use of abrasive wheels introduction. Misuse of abrasive wheels continues to result in accidents, often because the wrong type of wheel is fitted . 使用砂轮. 使用砂 轮 介绍. 砂轮的使用不当导致事故，往往是因为安装错误类型的轮. Use of abrasive wheels.

mahala
Télécharger la présentation

Safety Talk use of abrasive wheel

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Safety Talkuse of abrasive wheel

  2. Use of abrasive wheels Use of abrasive wheels introduction Misuse of abrasive wheels continues to result in accidents, often because the wrong type of wheel is fitted

  3. 使用砂轮 使用砂轮 介绍 砂轮的使用不当导致事故，往往是因为安装错误类型的轮

  4. Use of abrasive wheels Use of abrasive wheels Main points

  5. Use of abrasive wheels Wheels must only ever be fitted /replaced by a competent person

  6. Use of abrasive wheels Machine speeds must never exceed the maximum permissible PRM of the Wheel

  7. Use of abrasive wheels Eye and ear protection should always be worn

  8. Use of abrasive wheels Use of abrasive wheels other points to consider

  9. Use of abrasive wheels Don’t exert heavy pressure on wheels.

  10. Use of abrasive wheels Don’t use the side of wheels

  11. Use of abrasive wheels Keep fingers clear of cutting edge of wheel

  12. Welding Operations Wear suitable clothing that cover bare skin and is flame resistant

  13. 焊接操作 穿着合适的服装，覆盖裸露的皮肤和阻燃

  14. Use of abrasive wheels Ensure any guards are always correctly fitted and use – the minimum wheel surface required for the task should be exposed

  15. 焊接操作 焊接与切割产生的烟雾和气体，可损害呼吸系统（一些涂层材料的铅或有毒的烟雾，也会影响到身体的其他部位） - 佩戴过滤式防尘口罩，小批量工作。永久焊接位置应安装局部排气通风

  16. Welding Operations Have co2 or dry powder fire extinguishers at hand, check areas where welding operations have been undertaken at least 30 minutes after work has been completed for any residual fire risks.

  17. 焊接操作 手头有二氧化碳或干粉灭火器，检查焊接操作的地方已经进行了至少30分钟后，工作已经完成，任何残留的火灾风险。

  18. Use of abrasive wheels Be aware of other workers in the area – do not expose them to risk

  19. Use of abrasive wheels Adjust tools rests to be as close as possible to face of the wheel

  20. Use of abrasive wheels Only reinforced discs should be used on hand held machines

  21. Use of abrasive wheels Run replacement wheels for a full minute prior to using them ensuring you stand well clear

  22. Use of abrasive wheels Always stop wheel when not in use

  23. Use of abrasive wheels Keep the face of the wheel evenly dressed

  24. Use of abrasive wheels Visually check wheels before use for any obvious faults – if in any doubt get verification

  25. Use of abrasive wheels Use of abrasive wheels conclusion Accidents do not happen – they are caused人

More Related