1 / 21

Malfunctions

Malfunctions. They drive everything! Written and presented by: Jacqui Chapman. Introduction. The number and complexity of malfunctions are the cornerstone to the depth of simulation required. The Question. Why is it different from operator training?

maille
Télécharger la présentation

Malfunctions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Malfunctions They drive everything! Written and presented by: Jacqui Chapman

  2. Introduction The number and complexity of malfunctions are the cornerstone to the depth of simulation required. WATS 2009

  3. The Question • Why is it different from operator training? • What is the function of maintainer training? WATS 2009

  4. Operator vs. Maintainer Training Cause and Effect • Where the emphasis is on the effects of a malfunction and it is how an operator reacts to it that is all important • Where the cause of the malfunction is what a maintainer is trying to discover, using the effect as part of a fault diagnosis procedure. WATS 2009

  5. Training Form, Fit, Feel, Fidelity and Function • Form – shape of.. • Fit – well suited • Feel – ascertain by touch • Fidelity – precision in reproduction • Function – mode of activity by which a thing fulfils its purpose • Malfunction requirements will help drive the final solution WATS 2009

  6. Maintenance Tasks • Scheduled Maintenance • Malfunction Diagnosis • Malfunction Rectification WATS 2009

  7. Level of Maintenance • Confirm that there is a malfunction and isolate • Interpretation of monitoring data • Identify the component that has malfunctioned WATS 2009

  8. Malfunction Simulation • Confirmation of Failure WATS 2009

  9. Malfunction Simulation • Interpretationof Health and Usage Monitoring System WATS 2009

  10. Malfunction Simulation • Use of test equipment, failure flow charts WATS 2009

  11. Procedural vs. ‘Free Play’ • Fault Propagation • Does the simulation need to display secondary effects? • Diagnosis and Rectification • Does the simulation need to react to deviation? • No – procedural • Yes – Free play WATS 2009

  12. WATS 2009

  13. IF Engine > x rpm AND Power > 24V dc THEN Pressure Indicators = 3000 psi No Trigger to CWS Flying Controls, Landing Gear & Brakes respond correctly IFEND ELSE IF fault applied THEN Pressure Indicators = 0 psi Trigger the CWS Flying Controls, Landing Gear & Brakes do not respond END IF Confirmation of Failure IF Engine > x rpm AND Power > 24V dc AND no fault applied THEN Pressure Indicators = 3000 psi No Trigger to CWS Flying Controls, Landing Gear & Brakes respond correctly IFEND WATS 2009

  14. Interpretation of HUMS If HUMS connected and switched on then HUMS unit = ON Freeplay Switching off systems Disconnecting connectors Incorrect selection of HUMS unit Failures in other system impacting original system • Procedural If no fault applied then If HUMS O/P = then System response HUMS display Else if fault a then If HUMS O/P = then System response HUMS display … WATS 2009

  15. Use of Test Equipment If STTE connected and switched on then STTE unit = ON • Procedural If no fault applied then If STTE O/P = then System response STTE display Else if fault a then If STTE O/P = then System response STTE display … • Freeplay • Switching off systems • Disconnecting connectors • Incorrect selection of HUMS unit • Failures in other system impacting original system WATS 2009

  16. One Solution • Object Orientated Design • All components emulated Get propagation automatically WATS 2009

  17. WATS 2009

  18. Simulate vs. Emulate • Simulate is to have the appearance, form, feel and function of… • Emulate is to attempt to equal functionality without necessarily providing form and feel. WATS 2009

  19. WATS 2009

  20. Conclusion • Understand the level of malfunction coverage required • Understand what the maintainer is being trained to do in reaction to a malfunction • Form, Fit, Feel, Fidelity and Function WATS 2009

  21. Malfunctions They drive everything Jacqui.chapman@pennantplc.co.uk www.pennantplc.co.uk WATS 2009

More Related