1 / 49

CHAPTER 18

CHAPTER 18. Risk Measurement for a Single Facility. INTRODUCTION. To quantify credit risk, we wish to obtain the probability distribution of the losses from a credit portfolio and also to have a measure of the contribution of each loan to the portfolio loss

mallory-spencer
Télécharger la présentation

CHAPTER 18

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CHAPTER 18 Risk Measurement for a Single Facility

  2. INTRODUCTION • To quantify credit risk, we wish to obtain the probability distribution of the losses from a credit portfolio and also to have a measure of the contribution of each loan to the portfolio loss • In this chapter, we lay the foundation for quantifying the credit risk of a portfolio by quantifying the risk for individual facilities. • We start by considering the simple case of modeling the losses that could occur over one year due to a default • We then add the complication of additional losses due to the possibility of downgrades • Finally, we look at how the risk can be calculated for a credit exposure that lasts for multiple years (e.g., a five-year loan).

  3. DETERMINING LOSSES DUE TO DEFAULT • For a single facility, we describe the credit-loss distribution by the mean and standard deviation of the loss over a year • The mean is commonly called the expected, loss (EL) • The EL can be viewed as a cost of doing business because over the long run, the bank should expect to lose an amount equal to EL each year • The standard deviation of the loss is typically called the unexpected loss (UL)

  4. DETERMINING LOSSES DUE TO DEFAULT • In this section, we consider the potential losses due to default • The actual loss (L) can be described as the exposure at default (E), multiplied by the loss in the event of default (LIED) or severity (S), multiplied by an indicator of default (I) • The indicator (I) is a discrete variable that equals one if a default occurs, and zero otherwise

  5. DETERMINING LOSSES DUE TO DEFAULT • The two possible conditions at the end of the year are: • There is a default or there is no default, with probabilities of P and (1 - P) respectively. • The expected loss is then the amount that is lost in each condition, multiplied by the probability of being in each condition

  6. DETERMINING LOSSES DUE TO DEFAULT

  7. DETERMINING LOSSES DUE TO DEFAULT • The next step is to calculate the standard deviation of losses (UL)

  8. DETERMINING LOSSES DUE TO DEFAULT • An Example: if we loaned $100 to a BBB-rated company, then P (probability of default) would be 22 basis points. Assuming that S is 30%, then:

  9. DETERMINING LOSSES DUE TO DEFAULT • Now we repeat the derivations of EL and UL but without assuming fixed values for the exposure at default (E) and the loss in the event of default (S) • In this general case, the expected loss is the mean loss in each state, multiplied by the probability of being in that state:

  10. DETERMINING LOSSES DUE TO DEFAULT

  11. DETERMINING LOSSES DUE TO DEFAULT • Now, let us turn our attention to UL • In the general case, E and S are uncertain (namely, random variable) • The variance of loss (UL2) is the square of the deviation of the loss in each state, multiplied by the probability of being at each state.

  12. DETERMINING LOSSES DUE TO DEFAULT

  13. DETERMINING LOSSES DUE TO DEFAULT

  14. DETERMINING LOSSES DUE TO DEFAULT

  15. DETERMINING LOSSES DUE TO DEFAULT • In summary, two situations are considered: • S and E are fixed and constants • S and E are random variables

  16. DETERMINING LOSSES DUE TO BOTH DEFAULT AND DOWNGRADES • In the section above, we calculated the statistics of loss due to the possibility of default • It is also possible for bonds and loans to lose value because the issuing company is downgraded • When a company is downgraded, it means that the rating agency believes that the probability of default has risen • A promise by this downgraded company to make a future payment is no longer as valuable as it was because there is an increased probability that the company will not be able to fulfill its promise • Consequently, there is a fall in the value of the bond or loan.

  17. DETERMINING LOSSES DUE TO BOTH DEFAULT AND DOWNGRADES • As an example, consider a case in which the one-year (risk-free) government note is trading at a price of 95 cents per dollar of the nominal final payment (implying a risk-free discount rate; of 5.25%) • A promise by a single-A company to make a payment in one year would have a price around 94 cents per dollar, and a BBB company would trade around 93 cents on the dollar • This implies discount rates of 6.35% and 7.5%, or credit spreads of 1.1 % and 2.25% relative to the risk-free rate • If you had bought the bond of the single-A company for 94 cents, and then it was downgraded to BBB, you would lose 1 cent.

  18. DETERMINING LOSSES DUE TO BOTH DEFAULT AND DOWNGRADES • To obtain the EL and UL for this risk, we require the probability of a grade change and the loss if such a change occurs • The probability of a grade change has been researched and published by the credit-rating agencies. • Table 18-1 shows the probability of a company of one grade migrating to another grade over one year.

  19. DETERMINING LOSSES DUE TO BOTH DEFAULT AND DOWNGRADES

  20. DETERMINING LOSSES DUE TO BOTH DEFAULT AND DOWNGRADES • To understand how to read this table, let us use it to find the grade migration probabilities for a company that is rated single-A at the start of the year • Looking down the third column, we see that the company has a 7-basis-point chance of becoming AAA rated by the end of the year • It has a 2.25% chance of being rated AA, a 91.76% chance of remaining single-A, and a 5.19% chance of being downgraded to BBB. • Looking down to the bottom of the column, we see that it has a 4-basis-points chance of falling into default

  21. DETERMINING LOSSES DUE TO BOTH DEFAULT AND DOWNGRADES • Notice that the last row gives the probability of a company's defaulting over the year; for example, a company rated CCC at the beginning of the year has a 21.94% chance of having defaulted by the end of the year. • Table 18-2 shows the spread between U.S. corporate bonds and U.S. Treasuries in October, 2001. These spreads are calculated for zero-coupon bonds.

  22. DETERMINING LOSSES DUE TO BOTH DEFAULT AND DOWNGRADES • With these spreads, we can calculate the value of a bond or loan, and thereby estimate the change in value if the grade changes • As an example, let us calculate the EL and UL for a BBB-rated bond with a single payment of $100 that is currently due in 3 years. At the end of the year the bond will have 2 years to maturity. If we assume a risk-free discount rate of 5%, and the bond is still rated BBB, the value will be $88.45:

  23. DETERMINING LOSSES DUE TO BOTH DEFAULT AND DOWNGRADES • However, if the bond rating falls to single B, the value of the bond will fall to $81.90: • This is a loss of $6.55

  24. DETERMINING LOSSES DUE TO BOTH DEFAULT AND DOWNGRADES • We can repeat this calculation for all possible grades to give the values shown in Table 18-3 • The value in default corresponds to our assumption of a 30% LIED • Table 18-3 also shows the loss in value compared with the value if the bond retained its BBB-rating.

  25. DETERMINING LOSSES DUE TO BOTH DEFAULT AND DOWNGRADES

  26. DETERMINING LOSSES DUE TO BOTH DEFAULT AND DOWNGRADES • From Table 18-1, we have the probability of a change in credit grade • From Table 18-3, we have the loss amount if the bond changes grades • We can now bring these together to calculate EL and UL

  27. DETERMINING LOSSES DUE TO BOTH DEFAULT AND DOWNGRADES • The expected loss is calculated from the probability of being in a given grade (PG), multiplied by the loss for that grade (LG):

  28. DETERMINING LOSSES DUE TO BOTH DEFAULT AND DOWNGRADES >It shows the elements of the EL and UL calculation for the example BBB bond > The result is that EL is $0.18 and UL is $1.25

  29. DETERMINING LOSSES DUE TO BOTH DEFAULT AND DOWNGRADES • It is also interesting to compare this with the result of considering only the default • If we only consider default, EL is the probability of default times the loss, given default: • This is much less than the EL calculated including downgrades.

  30. DETERMINING LOSSES DUE TO BOTH DEFAULT AND DOWNGRADES • To calculate UL for default only, we only consider the default and zero-loss cases: • UL for just default is a little less than UL including downgrades • The downgrades are relatively insignificant to UL because UL is largely determined by the extreme losses, and the extreme losses depend mostly on defaults and not on downgrades.

  31. DETERMINING DEFAULT PROBABILITIES OVER MULTIPLE YEARS • In the discussion above, we dealt with the probability of the company's defaulting or being downgraded at some point over the next year • We are now going to tackle the problem of quantifying the risk over multiple years.

  32. DETERMINING DEFAULT PROBABILITIES OVER MULTIPLE YEARS • From our discussion on grade migrations, we know the probability of a company's transitioning from one grade to another by the end of a year • And we know the probability of each grade's defaulting. • From these two pieces of information, we can estimate the probability of the company's defaulting in the second year • The probability of default in the second year (PD,2) is given by the probability of transitioning to each grade (PG), multiplied by the probability of default for a company of that grade (PD∣G):

  33. DETERMINING DEFAULT PROBABILITIES OVER MULTIPLE YEARS • For a single-A rated bond, the probability of default in the first year is 4 basis points. The probability of defaulting by the end of the second year is given by the following sum:

  34. DETERMINING DEFAULT PROBABILITIES OVER MULTIPLE YEARS

  35. DETERMINING DEFAULT PROBABILITIES OVER MULTIPLE YEARS • Let us use the symbol M for the migration matrix in Table 18-1

  36. DETERMINING DEFAULT PROBABILITIES OVER MULTIPLE YEARS • Define G to be a vector giving the probability of being in each grade:

  37. DETERMINING DEFAULT PROBABILITIES OVER MULTIPLE YEARS • At the beginning of the first year, a single-A-rated bond has a 100% chance of being rated single A:

  38. DETERMINING DEFAULT PROBABILITIES OVER MULTIPLE YEARS • The probability distribution of ratings at the end of the year is given by M times G:

  39. DETERMINING DEFAULT PROBABILITIES OVER MULTIPLE YEARS • This equation can be used recursively to get the probability distribution of grades after N years

  40. DETERMINING DEFAULT PROBABILITIES OVER MULTIPLE YEARS • For a company that is initially rated single A, we get the following results:

  41. DETERMINING DEFAULT PROBABILITIES OVER MULTIPLE YEARS • Figure 18-1 shows the probability of default over 10 years for companies with different initial grades • The results are also shown numerically in Table 18-5 for reference

  42. DETERMINING DEFAULT PROBABILITIES OVER MULTIPLE YEARS

  43. DETERMINING DEFAULT PROBABILITIES OVER MULTIPLE YEARS

  44. DETERMINING DEFAULT PROBABILITIES OVER MULTIPLE YEARS • Note that the probabilities above are cumulative probabilities of default. Two other measures of default probability are also of interest to us: • The marginal probability: the probability that the company will default in any given year • The conditional probability: the probability that it will default in the given year, given that it did not default in any of the previous years

  45. DETERMINING DEFAULT PROBABILITIES OVER MULTIPLE YEARS • The marginal probability: the probability that the company will default in any given year • The marginal probability is calculated by taking the difference in the cumulative probability:

  46. DETERMINING DEFAULT PROBABILITIES OVER MULTIPLE YEARS • The conditional probability: the probability that it will default in the given year, given that it did not default in any of the previous years • The conditional probability is calculated by the marginal probability divided by the probability that it has survived so far:

  47. DETERMINING DEFAULT PROBABILITIES OVER MULTIPLE YEARS • Figure 18-2 shows the conditional probability of default over 10 years • Notice that as time increases, the probabilities converge • One way of thinking about this is to say that if a company is still surviving many years from now, we cannot predict what will be its rating.

  48. DETERMINING DEFAULT PROBABILITIES OVER MULTIPLE YEARS

More Related