1 / 16

Flaw of Averages

Flaw of Averages. This presentation explains a common problem in the design and evaluation of systems This problem is the pattern of designing and evaluating systems based on the “average” or “most likely” future projections

mariah
Télécharger la présentation

Flaw of Averages

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Flaw of Averages • This presentation explains a common problem in the design and evaluation of systems • This problem is the pattern of designing and evaluating systems based on the “average” or “most likely” future projections • Problem derives from misunderstanding of probability and systems behavior, known as FLAW OF AVERAGES

  2. Flaw of Averages • Name derives from Sam Savage • It is a pun, integrating two concepts It refers to • A mistake => a “flaw” • The concept of the “law of averages”, that is, that things balance out “on average” • The flaw consists of assuming that design or evaluation based on “average” (or most likely) conditions give correct answers

  3. A motivating example The design of an oil platform and wells in Golf of Mexico (Babajide)

  4. Gulf of Mexico Platform Probability Mass Functions Note: “Most likely” scenarios are 150 and 100

  5. Combined PMF

  6. Comparison of Values Based on “most likely” estimates Based on actual distribution of possibilities Actual ENPV  Value based on Mostly Likely Conditions

  7. Another motivating example Decision Analysis example

  8. Comparison of Results Value based on most likely event (No Carbon Tax) = 6.00 Value based on recognizing possibility of Carbon Tax is different = 10.8

  9. Why does Flaw occur? • Flaw is a pattern in systems design, Why? Several reasons converge • Difficult to evaluate system over many different possibilities – hard enough to create one design • Management fixes parameters (such as oil price) to facilitate comparisons in company • Uncertainties exist outside of technical specialty (markets, geology…) so that designers use “best estimates”

  10. Mathematics of Flaw • Jensen’s law: • The Average of all the possible outcomes associated with uncertain parameters generally does not equal • the value obtained from using the average value of the parameters E [ f(x) ]  f [ E(x)] except when f(x) linear

  11. Consequences • In simple terms, this means that the answer you get from a realistic description differs – often greatly – from the answer you from using most likely estimates • This is because the gains when things do well do not balance the losses when things do not • (sometimes they’re more, sometimes less) • In short: system behavior is non-linear

  12. 3 Reasons for Non-Linearity • System response is non-linear • System response involves some discontinuity (step change) • Management rationally imposes a discontinuity

  13. System Response is Non-Linear • Economies of Scale: Unit costs decrease with scale of production • Large initial costs prorated over volume, so that unit costs decrease as scale increases toward capacity • Increasing marginal costs as scale increases (labor, material costs higher) Unit Cost This is Usual Situation! Scale

  14. System Response involves some Discontinuity Discontinuities = special form of non-linearity Discontinuities are Common: • Expansion of a Project might only occur in large increments (new runways, for example) • A System may be capacity constrained, so that profitability or values increases with demand up to a point, and then levels off

  15. Management Creates Discontinuity • Whenever the Managers or System Operators decide to take some major decision about a project – to enlarge it or change its function – this creates a step change in the performance of the system. • This can happen often – and does! • See “Flaw of Averages” draft chapter

  16. Take-Aways • Do not be a victim of Flaw of Averages • Do not value projects or make design decisions based on average or most likely forecasts. • Do consider, as best you can, the entire range of possible events and examine the entire distribution of consequences.

More Related