1 / 20

ERGONOMICS II

ERGONOMICS II. Funded by the Netherlands embassy , Ankara, Turkey. 1. 2. 3. Back disorders. Hand-Arm Vibration Syndrome. Ergonomic Solutions. Content. Hand-Arm Vibration Syndrome. *Caused by operating vibrating machinery *Especially in cold, damp weather.

mariko
Télécharger la présentation

ERGONOMICS II

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ERGONOMICS II Funded by the Netherlands embassy , Ankara, Turkey

  2. 1 2 3 Back disorders Hand-Arm Vibration Syndrome Ergonomic Solutions Content

  3. Hand-Arm Vibration Syndrome *Caused by operating vibrating machinery *Especially in cold, damp weather Reynaud’s Phenomenon - “White Finger”

  4. Back Disorders

  5. Back Injuries are the Nation’s #1 Workplace Safety Problem

  6. Prevent Back Injuries • Avoid lifting and bending whenever you can • Place objects up off the floor • Raise/lower shelves. • Use carts and dollies

  7. Prevent Back Injuries • Use cranes, hoists, lift tables, and other lift-assist devices wheneveryou can • Test the weight of an object before lifting by picking up a corner • Get help if it’s too heavy for you to lift it alone

  8. Things You Can Do • Minimize back problems by exercises that tone the muscles in back, hips and thighs

  9. Employer Should: Begin an employee awareness education program Analyze the workplace for hazards Reduce any hazards they find

  10. A FEW SOLUTIONS... • Reduce manual material handling • Pre-Plan material drops • Utilize material handling equipment • Keep materials in “neutral zone” • Equipment • Use the right tool for the job • Evaluate new tools for ergonomics • Keep sharp & in good repair • Use vibration dampening tools / gloves • Reduce Duration • Mini-breaks • Multi-task • Employee rotation/job share

  11. POSTURE is Solutions"

  12. ERGONOMIC SOLUTIONS PROPER ALIGNMENT "

  13. Solution: Orientation to Work Surface

  14. Solution: Orientation to Work Surface

  15. Heavy Lifting

  16. Photos used in this presentation were taken from The presentation of David Ellsworth *Edmonds Community College- The course supported from the Occupational Safety and Health Administration, U.S. Department of Labor.

More Related