1 / 57

Chemical Separations

What is a chemical separation? Examples: Filtration Precipitations Crystallizations Distillation HPLC GC Solvent Extraction Zone Melting Electrophoresis Mass Spectroscopy. Chemical Separations. What is the object of the separation. Collection of a pure product

martyp
Télécharger la présentation

Chemical Separations

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. What is a chemical separation? Examples: Filtration Precipitations Crystallizations Distillation HPLC GC Solvent Extraction Zone Melting Electrophoresis Mass Spectroscopy Chemical Separations

  2. What is the object of the separation. Collection of a pure product Isolation for subsequent analysis for either quantification or identification Analysis How Much? What is it? Chemical Separations

  3. Major Industries Petroleum Distillation Distilled Spirits Chemical Separations

  4. Petroleum is a mixture of hydrocarbons. The larger the molecular weight the less volatile. So we must separate into various molecular weight fractions (different boiling points) The results are still complex mixtures Chemical Separations

  5. Chemical Separations

  6. http://oceanexplorer.noaa.gov/explorations/02sab/background/products/products.htmlhttp://oceanexplorer.noaa.gov/explorations/02sab/background/products/products.html Solvent Extraction

  7. Solvent Extraction

  8. Replace concentration with moles over volume and let q equal the fraction in the aqueous phase

  9. Define a new term for the ratio of the volumes of the phases

  10. We can do a little algebra and find an expression for q

  11. p is the term for the fraction in the organic p + q = 1 Giving Since if it does not end up in the aqueous phase it must be in the organic.

  12. You have 100.0 mL of an aqueous solution that is 100.0 mM in compound C.   This solution is extracted with 50.0 mL of diethyl ether and the aqueous phase is  assayed and it is found that the concentration of compound C that remains is 20.0 mM.  What is the equilibrium constant for this extraction system. Sample Problem

  13. Solution

  14. We can do multiple extraction from the aqueous phase. • We end up with the following expression for what is left in the aqueous phase.

  15. How many extractions would be required to remove 99.99% of aspirin from an aqueous solution with an equal volume of n-octanol? Since 99.99% must be removed the decimal fraction equivalent of this is  0.9999.  This leaves 0.0001 in the aqueous phase.  Since we have equal volumes then Vr is 1.00. We are able to find from the Interactive Analysis Web site that K for Aspirin is 35.5.  We plug these values into the q equation and the power is the unknown. Example

  16. Solution

  17. A compound such as aspirin is a carboxylic acid. We can represent this as HA. Do we expect the ion A- to be very soluble in the organic phase??? What if our compound can dissociate or participate in some other equilibrium?

  18. So if we have dissociation then less will go into the organic phase. Kp is the ratio of concentration of aspirin (in the un-dissociated form) in each phase. This ratio will always be the same. How do we account for the ion formation? Dissociation

  19. Distribution Coefficient • Where C is the formal concentration of the species. • Ca = [HA] + [A-] • Dc will vary with conditions • For this compound what is that condition?

  20. Dc • Since the ion is not very soluble in the organic phase then we may assume that the dissociation will not happen in that phase. • This gives us the expression to the right.

  21. Acid Equilibria • What is the equilibrium? • Ka

  22. With a little algebra • So if you know Kd and Ka then you can determine Dc as a function of H+ (pH) • However if [H+] is much larger than Ka then Dc will equal Kd. If the [H+] is close in value to Ka then D will be related to the pH • Plotting this we get.

  23. Well we can now move a solute (analyte) from one phase to another.  This can be very useful when extracting a compound that has significant chemical differences from other compounds in solution.  As a matter of fact this has been used as an interview question for prospective co-ops when I worked in industry. The question would go like this.  You have carried out a series of reactions and it is now time to work up the product which currently sits in an organic solution (methylene chloride).  Your expected product is a primary amine.  Which of the following solutions would you extract this methylene chloride solution with to isolate your amine. Your choices are: A)   Toluene. B)   0.1 N NaOH (aq) C)    0.1 N HCl (aq) D)    I never wanted to work here anyhow. So What, Why is this useful.

  24. So far we can tell how one compound moves from one phase to another. What if we are try to separate two compounds, A and B Well we might just suspect that if we find a solvent system that has different values of Dc for each compound we could end up with most of one compound in one phase and the other compound in the opposite phase. It is not that simple. Separation

  25. System I Da = 32 Db = 0.032 (A ratio of 1000) Vr= 1 Let's recall our equations q (fraction in aqueous)  =  1 /  (DVr + 1) p (fraction in organic)       =   DVr / (DVr + 1) Vr (volume ratio)            =   Vo / Va Example

  26. pa  =  32*1 / (32*1 + 1)  =  0.97 pb  =  0.032*1/ (0.032*1 + 1)  =  0.03 If we assume that we have equal moles of A and B to start then what is the purity of A in the Organic Phase? Purity =  moles A /  (moles A + moles B) Purity =  0.97 / (0.97 + 0.03)  =  0.97 or 97 % Case I

  27. Da = 1000 Db = 1 VR = 1 (Ratio is still 1000) pa  =  1000*1 / (1000*1 + 1*1)  =  1000/1001  =  0.999   Aha! we got more a into the organic, as we would expect with a higher D value. Now pb =  1*1 / ( 1*1 +1) =  1/2  = 0.5 oh-oh What do we get for purity of compound a now? purity =  0.999 / (0.999 + 0.50)  =  0.666 Yuck! Case II

  28. Once we have selected the solvent and pH,  then there is little that we can do to change D.     What else do we have in our control????? Let's look p  =  DVr / (DVr + 1) Not much here except Vr  and in fact that is the key to this problem.  Is there an optimum Vr value for the values of D that we have?  Yes! Our equation for this is      V r(opt)  =  (Da*Db)-0.5 How can we get around this issue?

  29. So let us look at our two cases and see which will give us the optimum values. Case I Da  =  32   and Db  =  0.032 V r(opt) =  (32 * 0.032)-0.5   =   ( 1 )-0.5  = 1 So we were already at the optimum. Revisit the two cases

  30. Case II Da = 1000 and Db = 1 Vr (opt)  =  (1000*1)-0.5  = 1000-0.5  =  0.032 Which mean that when we do our extraction we will extract _______ mL of organic for each _______ mL of aqueous. Case II Revisited

  31. What is our purity for this system? pa  =  1000*0.032 / (1000*0.032 + 1)  =  32/33  =  0.97 and pb  =  1*0.032 / (1*0.032 + 1)  =  0.032/1.032 = 0.03  Purity of a then is 0.97/ (0.97 + 0.03) Which will give us the 97% purity we had for Case I with with the Vr of 1. Purity for Case II

  32. If we were to extract again then we would just remove the same proportions. We would get more compound extracted but it would be the same purity. What if we were to take the organic phase and extract it with fresh aqueous phase. We know that one of the two compounds will end up mostly in that aqueous phase so we should enhance the purity of the other compound in the organic phase. Can we improve this purity?

  33. Called that since you are extracting back into the original phase. Back Extraction

  34. Let's look at the numbers. Da = 32 Db = 0.032 Vr = 1 pa = 0.97 pb = 0.03 qa = 0.03 qb = 0.97 Let’s prepare a table.  Back Extraction Case I Example

  35. Before Shaking Amount A Amount B Organic Phase 0.97 0.03 Fresh Aqueous Phase 0 0 Initial conditionsprior to starting back extraction .

  36. How much goes to the Aqueous phase q        which is 0.03 for A and 0.97 for B How much goes to the Organic phase p        which is 0.97 for A and 0.03 for B After Shaking Amount A Amount B Organic Phase (0.97)(0.97) (0.03)(0.03) Aqueous Phase (0.97)(0.03) (0.03)(0.97) Now we extract – shake shake shake

  37. Purity = Amount A / (Amount A + Amount B)  =  0.97*0.97 / (0.97*0.97 + 0.03*0.03) = 0.94/(0.94 + 0.0009) = 99.9% What is the yield of A (fraction of the total amount that we started with) Now what is the purity for A in the organic phase???

  38. After second Back Extraction Amount A Amount B Organic Phase 0.94*0.97 0.0009*0.03 Aqueous Phase 0.94*0.03 0.0009*0.97 Let’s do it again – Can we improve purity even more? Purity A   =  0.913 / (0.913 + 0.000027) =  99.997% But our yield has dropped to 91.3%,    there is a price to pay for the added purity.

  39. Such multiple extraction systems have been developed. Still a viable option for preparative work. For separations it has been replaced by HPLC Called Craig Counter Current Extraction. Special glassware is used. Can We Expand This?Why Would We Want to?

  40. Craig CCE • Equal amounts of organic (red) and aqueous (blue) solvents with the analyte(s) are added to the A arm of the tube via port O. Fresh Aqueous Solvent is added to each of the tubes down the apparatus.

  41. Craig CCE • Rock the system back and forth and to establish equilibrium. • Allow the system to stand for the layers to separate. • Rotate the apparatus counter clockwise about 90o to 100o.

  42. Craig CCE • Rotate Back to Horizontal

  43. Starting Conditions After One Equilibrium Transfer Step 1

  44. Now here is what is in each tube/phase after equilibrium is reached. Now we do Transfer 2

  45. Now here is what we have in each tube after the next equilibrium. The total in each tube times either p or q as appropriate. We transfer again. Transfer Step 3

  46. Shake Again  Equilibrium 4 Transfer 4 See a trend????

  47. How about a binomial expansion? (q  +  p)n  =  1 Powers of the two terms in each tube will add up to n Coefficients will be found from Pascal Triangle 1 1     1 1     2     1 1     3     3     1 1     4     6     4     1 1     5     10     10     5     1 1     6     15     20     15     6     1 1     7     21     35     35     21     7     1 Craig CCE

More Related