1 / 31

Input / Output functions in C

Input / Output functions in C. Concepts to Learn…. Standard Libraries Input/Output Data Streams printf() scanf() Variable Argument Lists File I/O fprintf and fscanf sprintf and sscanf. BYU CS/ECEn 124. Input and Output. 2. Standard Libraries. C Standard Library.

mateo
Télécharger la présentation

Input / Output functions in C

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Input / Output functions in C

  2. Concepts to Learn… • Standard Libraries • Input/Output • Data Streams • printf() • scanf() • Variable Argument Lists • File I/O • fprintf and fscanf • sprintf and sscanf BYU CS/ECEn 124 Input and Output 2

  3. Standard Libraries C Standard Library • Standard libraries promote cross-platform compatibility. • Useful for building complex programs. • Functions, types, and macros of the standard library are accessed by the #include directive. • Headers may be included in any order (and any number of times). • Actual I/O libraries can be linked statically or dynamically. BYU CS/ECEn 124 Input and Output 3

  4. Standard Libraries ANSI Standard Libraries • <assert.h> Diagnostics • <ctype.h> Character Class Tests • <errno.h> Error Codes Reported by (Some) Library Functions • <float.h> Implementation-defined Floating-Point Limits • <limits.h> Implementation-defined Limits • <locale.h> Locale-specific Information • <math.h> Mathematical Functions • <setjmp.h> Non-local Jumps • <signal.h> Signals • <stdarg.h> Variable Argument Lists • <stddef.h> Definitions of General Use • <stdio.h> Input and Output • <stdlib.h> Utility functions • <string.h> String functions • <time.h> Time and Date functions BYU CS/ECEn 124 Input and Output 4

  5. Input/Output Input/Output • Most programs require an input and output. • I/O is not directly supported by C. • I/O is handled by a set of standard library functions defined by the ANSI C standard. • The stdio.h header file contains function declarations for I/O and preprocessor macros related to I/O. • stdio.h does not contain the source code for I/O library functions! BYU CS/ECEn 124 Input and Output 5

  6. Data Streams I/O Data Streams • All C character based I/O is performed on streams. • All I/O streams must be opened and closed • A sequence of characters received from the keyboard is an example of a text stream • In standard C there are 3 streams automatically opened upon program execution: • stdin is the input stream • stdout is the output stream • stderr stream for error messages BYU CS/ECEn 124 Input and Output 6

  7. Data Streams I/O Data Streams • One character at a time: • int putc(int character, FILE* stream); • #define putchar(c) putc(c,stdout) char c = 'h'; putchar(c); putchar('h'); putchar(104); • int getc(FILE* stream); • #define getchar() getc(stdin) char c; c = getchar(); BYU CS/ECEn 124 Input and Output 7

  8. Data Streams I/O Data Streams • On most computer systems, stdin and stdout I/O streams are buffered. • A buffer is a temporary storage area • Every character sent to the keyboard input stream is captured by the computer’s low-level software and kept in a buffer until it is released to the input stream. • Allows editing of typed characters. • The keyboard input buffer holds keystrokes until the input line is terminated by the enter (\n) key. • After the enter key is pressed, the program can see the characters typed. BYU CS/ECEn 124 Input and Output 8

  9. printf() Formatted Output • The printf function outputs formatted values to the stdout stream using putc printf( const char *format, ... ); • The format string contains two object types: • Ordinary characters that are copied to the output stream • Conversion specifications which cause conversion and printing of the next argument in the argument list. printf("\nX = %d, Y = %d", x, y); Conversion specifications Characters BYU CS/ECEn 124 Input and Output 9

  10. printf() Formatted Output • Each conversion specification begins with a % and ends with a conversion character: • Integer "%d" • String "%s" • Character "%c" • Formatting options are inserted between the % and the conversion character: • Field width "%4d" • Length modifier "%ld" • Left justified "%-4d" • Zero padded "%04d" BYU CS/ECEn 124 Input and Output 10

  11. printf() Formatted Output • Common conversion specifications: • Decimal "%d" or "%i" • String "%s" • Character "%c“ • Hexadecimal "%x" • Unsigned decimal "%u" • Floating point "%f" • Scientific notation "%e" • Pointer "%p" • % "%%" BYU CS/ECEn 124 Input and Output 11

  12. printf() Formatted Output • A period is used to separate the field width from the precision when formatting floating point numbers: printf("Speed = %10.2f", speed); • A variable field width may be specified using an asterisk (*) formatting option. The value is computed by converting the next argument (which must be an int): printf("%.*s", max, s); BYU CS/ECEn 124 Input and Output 12

  13. printf() Formatted Output • Variable field width example: #include <stdio.h> int main(void) { const char text[] = "Hello world"; int i; for ( i = 1; i < 12; ++i ) { printf("\"%.*s\"\n", i, text); } return 0; } /* my output "H" "He" "Hel" "Hell" "Hello" "Hello " "Hello w" "Hello wo" "Hello wor" "Hello worl" "Hello world" */ BYU CS/ECEn 124 Input and Output 13

  14. printf() Formatted Output • Certain characters cannot be easily representedby a single keystroke, because they • correspond to whitespace (newline, tab, backspace, return...) • are used as delimiters for other literals (quote, double quote, backslash, ...) • special functions BYU CS/ECEn 124 Input and Output 14

  15. printf() Formatted Output int a = 100; int b = 65; char c = 'z'; char banner[ ] = "Hola!"; double pi = 3.14159; printf("The variable 'a' decimal: %d\n", a); printf("The variable 'a' hex: %x\n", a); printf("'a' plus 'b' as character: %c\n", a+b); printf("A char %c.\t A string %s\n A float %7.4f\n", c, banner, pi); BYU CS/ECEn 124 Input and Output 15

  16. printf() Formatted Output • What happens when you don't provide adata argument for every formatting character? printf("\nThe value of nothing is %d"); • %d will convert and print whatever is on the stack in the position where it expects to find the first argument. • Something will be printed, but it will be garbage or whatever is next in the stack. BYU CS/ECEn 124 Input and Output 16

  17. scanf() Formatted Input • The function scanf is similar to printf, providing many of the same conversion facilities in the opposite direction: scanf( const char *format, ... ); • reads characters from the standard input (stdin), • interprets them according to the specification in format, • stores the results through the remaining arguments. • The format argument is a string; all other arguments must be pointers indicating where the corresponding converted input should be stored. BYU CS/ECEn 124 Input and Output 17

  18. scanf() Formatted Input • Common input conversion specifications: • Decimal "%d" or "%i" • String "%s" • Character "%c“ • Hexadecimal "%x" • Unsigned decimal "%u" • Floating point "%f" BYU CS/ECEn 124 Input and Output 18

  19. scanf() scanf Conversion • For each data conversion, scanf will skip whitespace characters and then read ASCII characters until it encounters the first character that should NOT be included in the converted value. %d Reads until first non-digit. %x Reads until first non-digit (in hex). %s Reads until first whitespace character. • Literals in format string must match literals in theinput stream. • Data arguments must be pointers, because scanfstores the converted value to that memory address. BYU CS/ECEn 124 Input and Output 19

  20. Doesn't match literal '/', so scanf quitsafter second conversion. scanf() scanf Return Value • The scanf function returns an integer, which indicates the number of successful conversions performed. • This lets the program check whether the input streamwas in the proper format. • Example:scanf("%s %d/%d/%d %lf", name, &bMonth, &bDay, &bYear, &gpa); Input StreamReturn ValueMudd 02/16/69 3.02 5 Muss 02 16 69 3.02 2 BYU CS/ECEn 124 Input and Output 20

  21. scanf() Formatted Input • scanf returns the number of successfully matched and assigned input items i = scanf("%d/%d/%d", &mon, &day, &yr); • What’s wrong with the following? int n = 0; scanf("%d", n); • Of course, the argument is not a pointer! • scanf will use the value of the argument as an address • What about a missing data argument? scanf("%d"); • scanf will get an address from stack, where it expects tofind first data argument - if you're lucky, the program will crash trying to modify a restricted memory location. BYU CS/ECEn 124 Input and Output 21

  22. Variable Argument Lists Variable Argument Lists • The number of arguments in a call to printf or scanf depends on the number of data items being read or written. • Declaration of printf (from stdio.h) int printf(const char*, ...); • Parameters pushed on the stack from right to left. • This stack-based calling convention allows fora variable number of arguments to be easily handled. BYU CS/ECEn 124 Input and Output 22

  23. Variable Argument Lists Variable Argument Lists #include <stdio.h> #include <stdarg.h> #define PRINT_BUFFER_SIZE 32 //************************************************************** // formatted printf to lcd // void lcd_printf(char* fmt, ...) { va_list arg_ptr; char pBuffer[PRINT_BUFFER_SIZE]; char* s_ptr = pBuffer; if (strlen(fmt) > PRINT_BUFFER_SIZE) ERROR2(SYS_ERR_PRINT); va_start(arg_ptr, fmt); // create ptr to args vsprintf(s_ptr, fmt, arg_ptr); // create print string while (*s_ptr) lcd_putchar(*s_ptr++); // output string va_end(arg_ptr); // reset ptr to null return; } // end lcd_printf BYU CS/ECEn 124 Input and Output 23

  24. File I/O I/O from Files • The general-purpose versions of I/O routines: • printf -> fprintf • scanf -> fscanf • These general-purpose functions allow us to specify the stream on which they act. • Before we can perform file I/O, we need to declare a file pointer for each physical file we want to manipulate: FILE* infile; FILE* outfile; BYU CS/ECEn 124 Input and Output 24

  25. File I/O I/O from Files • A file stream must be "opened" before acessing • Each call to fopen requires two arguments: • name of file to open • description of mode of operations we want to perform on that file. infile = fopen("myinfile", "r"); outfile = fopen("myoutfile", "w"); BYU CS/ECEn 124 Input and Output 25

  26. File I/O I/O from Files • The operation modes are: • "r" for reading • "w" for writing (an existing file will lose its contents) • "a" for appending • "r+" for reading and writing. • If the call to the fopen() function is successful, a file pointer to a logical file is returned. • Returns NULL on failed fopen() call FILE* infile; if (infile = fopen("myfile", "r") == NULL) return error; BYU CS/ECEn 124 Input and Output 26

  27. fprintf / fscanf fprintf and fscanf • Once a file is opened, it can be read from or written tousing fscanf() and fprintf(), respectively. • These are just like scanf() and printf(), except an additional argument specifies a file pointer. fprintf(outfile, "The answer is %d\n", x); fscanf(infile, "%s %d/%d/%d %lf", name, &bMonth, &bDay, &bYear, &gpa); BYU CS/ECEn 124 Input and Output 27

  28. File I/O I/O from Files #define LIMIT 1000 int main() { FILE* infile; FILE* outfile; double price[LIMIT]; int i=0; infile = fopen("myinputfile", "r"); // open for reading outfile = fopen("myoutputfile", "w"); // open for writting if ((infile != NULL) && (outfile != NULL)) { while (i < LIMIT) { if ((fscanf(infile, "%lf", &prices[i]) == EOF)) break; printf("\nprice[%d] = %10.2lf", i, price[i]); // ... process prices[i] i += 1; } } else printf("\nfopen unsuccessful!"); fclose(infile); fclose(outfile); } BYU CS/ECEn 124 Input and Output 28

  29. File I/O I/O from Files #include <stdio.h> void filecopy( FILE*, FILE*); int main(int argc, char** argv) { FILE* fp; if (argc == 1) filecopy(stdin, stdout); // use standard I/O else { while (--argc > 0) { if ((fp = fopen(*++argv, "r")) == NULL) { printf("\ncat: can’t open %s", *argv); return 1; } else { filecopy(fp, stdout); fclose(fp); } } } return 0; } void filecopy(FILE* ifp, FILE* ofp) { int c; while ((c = getc(ifp)) != EOF) putc(c, ofp); } BYU CS/ECEn 124 Input and Output 29

  30. sprintf / sscanf sprintf and sscanf • sprintf converts binary numbers to a string • int sprintf(char* buffer, const char* fmt,…); • buffer – char array big enough to hold converted number(s) • fmt – format specification • Variable list to be converted • Returns number of characters in converted string (not including null character • Useful in converting data to strings • sscanf converts a string to binary numbers • int sscanf(char* buffer, const char* fmt,…); • buffer – char array contains data to be converted • fmt – format specification • List of pointers to variables to hold converted values • Returns number of items converted • Useful to convert character data files BYU CS/ECEn 124 Input and Output 30

  31. BYU CS/ECEn 124 Input and Output 31

More Related