1 / 1

Hole Saws

The hole saws is used to drill a hole in thin materials, up to a1/2 for metal. A normal drill will try to lift sheet metal off of the table and spin it. Purpose:. Secure/Clamp work piece. De-bur edges to prevent cuts. Not for thick metal. Safety :. Vender. http://www.MSCdirect.com

maya-lamb
Télécharger la présentation

Hole Saws

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. The hole saws is used to drill a hole in thin materials, up to a1/2 for metal. A normal drill will try to lift sheet metal off of the table and spin it. Purpose: • Secure/Clamp work piece. • De-bur edges to prevent cuts. • Not for thick metal. Safety: Vender http://www.MSCdirect.com www.msdiscount.com www.mkmorse.com Available Hole Saw Sizes Hole Saws Figure 1. Hole saw location cabinet 3 behind collets Stepsfor Use: 1. Determine diameter and location of desired hole. 2. Determine the appropriate speed for cutting based on hole saw diameter. These speeds can be found on the Mill/Lathe/Drill Press Speed Charts. 3. For the larger hole saws snap the tightening collar down to prevent over tightening. Use the pilot drill with out tightening collar for smaller hole saws. 4. Insert appropriate hole saw into drill press or mill. 5. Secure work piece on wood or something that can be cut. 6. Cut work piece using oil for lubrication. 7. De-bur edges to prevent cuts. 8. Clean up and put tools away. Figure 2. Hole Saws

More Related