1 / 40

Regional TIR Seminar (Tunis, 3 and 4 June 2009)

Regional TIR Seminar (Tunis, 3 and 4 June 2009). Secure vehicles: Technical regulations regarding load compartments and containers. APPROVAL OF ROAD VEHICLES (CONTAINERS). Basic principles

meg
Télécharger la présentation

Regional TIR Seminar (Tunis, 3 and 4 June 2009)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Regional TIR Seminar(Tunis, 3 and 4 June 2009) Secure vehicles: Technical regulations regarding load compartments and containers

  2. APPROVAL OF ROAD VEHICLES (CONTAINERS) Basic principles • Goods cannot be removed from or introduced into the sealed part of the vehicle or container without leaving obvious traces of tampering or without breaking the Customs seal • Customs seals can be simply and effectively affixed to them • There exist no concealed spaces where goods may be hidden • All spaces capable of holding goods are readily accessible for Customs inspection Regional TIR Seminar, Tunis, 3-4 June 2009

  3. APPROVAL OF ROAD VEHICLES (CONTAINERS) (cont’d) • By competent authorities • Individual approval or design type approval • Road vehicles: Renewal every 2 years • Containers: Approval for life Regional TIR Seminar, Tunis, 3-4 June 2009

  4. APPROVAL OF ROAD VEHICLES (CONTAINERS) (cont’d) Approval Certificate of a road vehicle for the transport of goods under Customs seal Certificate No ………………. Vehicles: Approval certificate • Format A3, folded in two • Original to be kept on vehicle Containers: Approval plate • Permanently affixed • Clearly visible • Adjacent to other approval plates Regional TIR Seminar, Tunis, 3-4 June 2009

  5. SHEETED VEHICLES The sheet Door hinges Thong TIR-rings and eyelets Door closing system, lock and sealing device TIR-wire Sideboard hinges Regional TIR Seminar, Tunis, 3-4 June 2009

  6. SHEETED TRUCKS AND TRAILERS Special attention should be paid to: • Damages • Repairs • Company logos • TIR rings • Eyelets Regional TIR Seminar, Tunis, 3-4 June 2009

  7. SHEET Rather extensive damage: this trailer should NOT be allowed to continue, unless it is repaired Regional TIR Seminar, Tunis, 3-4 June 2009

  8. SHEET Minor damage: dependent on the commodity being transported, this trailer COULD be allowed to complete the current journey - but should NOT be able to carry out further international transport without being repaired Regional TIR Seminar, Tunis, 3-4 June 2009

  9. SHEET Company logo covers a repair made incorrectly - sheet repaired by using an adhesive tape on the inner side of the sheet (see also pages 160-161 of the TIR Handbook) Regional TIR Seminar, Tunis, 3-4 June 2009

  10. SHEETED VEHICLES Regional TIR Seminar, Tunis, 3-4 June 2009

  11. SHEETED VEHICLES Regional TIR Seminar, Tunis, 3-4 June 2009

  12. SHEETED VEHICLES Regional TIR Seminar, Tunis, 3-4 June 2009

  13. SHEETED VEHICLES: TIR RINGS Regional TIR Seminar, Tunis, 3-4 June 2009

  14. SHEETED VEHICLES: TIR RINGS Regional TIR Seminar, Tunis, 3-4 June 2009

  15. SHEETED VEHICLES: THONGS Regional TIR Seminar, Tunis, 3-4 June 2009

  16. SHEETED VEHICLES: TIR RINGS, TIR WIRE AND THONGS Regional TIR Seminar, Tunis, 3-4 June 2009

  17. SHEETED VEHICLES: THONGS Regional TIR Seminar, Tunis, 3-4 June 2009

  18. THONGS SHOULD BE MADE OF ONE PIECE: NO REPAIRS! Regional TIR Seminar, Tunis, 3-4 June 2009

  19. INADMISSIBLE EXAMPLES Regional TIR Seminar, Tunis, 3-4 June 2009

  20. HINGES Regional TIR Seminar, Tunis, 3-4 June 2009

  21. SHEETED VEHICLES: TIR WIRE • The most vulnerable and frequently manipulated element • Must be clearly visible at its entire length • Must be made of steel of at least 3 mm diameteror hemp or sisal of at least 8 mm diameter. Nylon ropes are not permitted! • Must be made of one piece only - no repairs, joints, etc.! • Must have a hard metal end-piece at each end(p.162 of the Handbook) • Length shall correspond exactly to what is required for each individual truck or trailer - no extra length shall be hidden anywhere, i.e. as loops between the TIR-rings Regional TIR Seminar, Tunis, 3-4 June 2009

  22. TIR WIRE Regional TIR Seminar, Tunis, 3-4 June 2009

  23. TIR WIRE Regional TIR Seminar, Tunis, 3-4 June 2009

  24. TIR WIRE Regional TIR Seminar, Tunis, 3-4 June 2009

  25. TIR WIRE Regional TIR Seminar, Tunis, 3-4 June 2009

  26. TIR WIRE Regional TIR Seminar, Tunis, 3-4 June 2009

  27. TIR WIRE Regional TIR Seminar, Tunis, 3-4 June 2009

  28. TIR WIRE Regional TIR Seminar, Tunis, 3-4 June 2009

  29. TIR WIRE Regional TIR Seminar, Tunis, 3-4 June 2009

  30. TIR WIRE Regional TIR Seminar, Tunis, 3-4 June 2009

  31. DOORS, OTHER CLOSING SYSTEMS AND CUSTOMS SEALING DEVICES • Doors and all other closing systems shall be fitted with a device on which Customs seals can be fixed • This device cannot be removed and replaced from the outside without leaving obvious traces, or the door or fastening be opened without breaking the Customs seals • The sealing device must be secured by welding, or by not less than two special joining devices • The sealing device must incorporate holes of not less than 11 mm in diameter or slots of at least 11 mm in length by 3 mm in width, and afford equal security whatever type of seal is used Regional TIR Seminar, Tunis, 3-4 June 2009

  32. SECURE CUSTOMS SEALING • TIR wire is not longer than necessary and is properly tightened • Customs seals are affixed as tight as possible • In a combination “sheeted vehicle - rear doors” both the TIR wire and door closing system should be secured. If the TIR wire does not pass through the pivoting device/ manoeuvre handle, extra seals are required • Due to wear and tear of sealing device details, the security of Customs sealing can go down Regional TIR Seminar, Tunis, 3-4 June 2009

  33. SECURE DOOR CLOSING SYSTEM Regional TIR Seminar, Tunis, 3-4 June 2009

  34. DOOR CLOSING SYSTEM Regional TIR Seminar, Tunis, 3-4 June 2009

  35. DOOR CLOSING SYSTEM Regional TIR Seminar, Tunis, 3-4 June 2009

  36. DOOR CLOSING SYSTEM Regional TIR Seminar, Tunis, 3-4 June 2009

  37. DOOR CLOSING SYSTEM Regional TIR Seminar, Tunis, 3-4 June 2009

  38. DOOR CLOSING SYSTEM Regional TIR Seminar, Tunis, 3-4 June 2009

  39. TIR Convention UNECE/TIR SECRETARIAT 8-14, Avenue de la PaixCH-1211 Geneva 10Switzerland Phone: +41 22 917 15 31 Fax: +41 22 917 06 14Email address: tirexb@unece.org http://tir.unece.org Regional TIR Seminar, Tunis, 3-4 June 2009

  40. THANK YOU Regional TIR Seminar, Tunis, 3-4 June 2009

More Related