1 / 13

a.k.a “ THE A.U.M. DEVICE” (PRONOUNCED “OHM”)

a.k.a “ THE A.U.M. DEVICE” (PRONOUNCED “OHM”). By B. Löwen Gruseck (EE) Gardy Lacombe (EE) Michael Sriprashad (EE). Sponsored by . To save energy Energy sustainability Reduce Phantom Power Reduce unwanted carbon dioxide emissions Save money. Eliminate standby power

mikkel
Télécharger la présentation

a.k.a “ THE A.U.M. DEVICE” (PRONOUNCED “OHM”)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. a.k.a “THE A.U.M. DEVICE”(PRONOUNCED “OHM”) By B. LöwenGruseck (EE) GardyLacombe (EE) Michael Sriprashad (EE) Sponsored by

  2. To save energy • Energy sustainability • Reduce Phantom Power • Reduce unwanted carbon dioxide emissions • Save money The A.U.M. Device

  3. The A.U.M. Device

  4. Eliminate standby power • Overall device to be energy efficient • Different modes of operations • User controlled onboard • User controlled wirelessly • Accurately calculate power usage The A.U.M. Device

  5. 3 outlets • 120V(RMS) AC 60Hz power input and output • Measures 5A, 120V • 75% savings on stand by power • 5V DC power for internal devices • Calculate power with at most +/- 5% error • At least10 bit wide ADC for power calculations • 2 user interface inputs • 100m wireless control The A.U.M. Device

  6. Motion Sensor Screen Wireless Communication Microcontroller Power Supply Current Sensor Wall (120V AC) Appliance Device Relay The A.U.M. Device

  7. StANDBY POWER SAVED • Pstandby =3*( .08A*120VRMS )= 28.8W • Pa.u.m.s. = (Pstandby/4) + 2.28W = 4.68W • Percent saved = 100% - 4.68W/28.8W = 83% saved! Cut-off power saved • Pstandby =3*( .08A*120VRMS )= 28.8W • Pa.u.m.s. = 0W + 2.28W = 2.28W • Percent saved = 100% - 2.28W/28.8W = 92% saved! The A.U.M. Device

  8. The A.U.M. Device

  9. The A.U.M. Device

  10. Using the hall effect sensors and magnets; the device can sense which pre set outlet is equipped • There are two pre set outlets • The first outlet the device into standby mode • The second outlet sets the device into sleep mode The A.U.M. Device

  11. Outlets turn off when timer runs out • User specified countdown • Timer overrides Standby Mode • Great for chargers or late nights The A.U.M. Device

  12. The A.U.M. Device

  13. Our project worked with very little problems in the end. The modes worked and the peripheral interfaces communicated effectively with the main device MCU Power Calculations came out to 0-5% accuracy as desired Some processes were delayed, due to constant interrupts and polling Streamlined MCU program and more sophisticated Android App would be ways to improve our design More compact physical and aesthetic housing design

More Related