1 / 25

Precision tests of calculated internal-conversion coefficients: the case of 134 Cs.

Precision tests of calculated internal-conversion coefficients: the case of 134 Cs. W. E. Rockwell Cyclotron Institute, TAMU Summer 2005 Advisor: J. C. Hardy. W. E. Rockwell Cyclotron Institute, TAMU Summer 2005 Advisor: J. C. Hardy. Outline. Background:  -decay Internal conversion

mimis
Télécharger la présentation

Precision tests of calculated internal-conversion coefficients: the case of 134 Cs.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Precision tests of calculated internal-conversion coefficients: the case of 134Cs. W. E. Rockwell Cyclotron Institute, TAMU Summer 2005 Advisor: J. C. Hardy W. E. Rockwell Cyclotron Institute, TAMU Summer 2005 Advisor: J. C. Hardy

  2. Outline • Background: • -decay • Internal conversion • Define internal conversion coefficient • Two theories: • Hole and no hole • Purpose • Experiment • Results/Calculations • Conclusion

  3. -Ray Emission Gamma-ray emission can occur during the de-excitation of a nucleus. Energy is released in the form of an electromagnetic wave of high energy called a gamma ray.

  4. Internal Conversion Internal conversion is a transition that competes with gamma ray emission. When internal conversion takes place the energy from the de-excitation of the nucleus is transferred to an atomic electron. The electron is then ejected with some kinetic energy.

  5. What is an Internal Conversion Coefficient (ICC) and why do we care? The internal conversion coefficient of a transition is defined as the ratio of the probabilities of internal conversion to -ray emission for that transition. Importance: • Nuclear decay schemes • Spin and parity assignments, Transition rates, Branching ratios • Detector calibration

  6. Theoretical Problems • Calculated ICC values depend strongly on how the theory deals with the hole left by the departing conversion electron. • One approach assumes that it is filled instantaneously, while the other considers that it stays empty throughout the entire conversion process. • The problem with the “no hole” theory is that in fact the electron leaves the atom in less time than it takes for the atomic hole to be filled.

  7. More Problems • Most calculated results of ICCs are only known to agree with experimental results on an average of a few percent, and there are some cases of much more significant discrepancies. • To date there are few exact measurements of ICCs with an uncertainty below one percent and this lack of precision makes it difficult to be definitive about the validity of either treatment of the hole.

  8. Purpose • In S. Raman et al, Phys. Rev. C 66, 044312 (2002) experimental values of ICCs were used to help make the argument that the “no hole” theory fit the experimental data better. • For 134Cs, both theoretical values disagreed with experiment. • The uncertainty of the 134Cs experimental value was nearly two percent. • Our experiment: • For our experiment we aimed to have an uncertainty less than one percent in order to achieve a demanding test of the theories.

  9. Made solutions of CsNO3, CsCl, Cs2CO3 using very pure chemicals. CsNO3-99.999% CsCl-99.999% Cs2CO3-99.995% Made a thin circular layer of very diluted insulin on a 1 inch square of Mylar. Dropped 0.05 ml of each solution on layer of insulin. Dried drops using vacuum chambers and a dry box and covered with hat shaped tops Neutron activated samples at TRIGA reactor in the Texas A & M University Nuclear Science Center 133Cs(n, ) 134Cs Used a disposable vacuum bag to cut off hat-like top and covered sample with Kapton tape. Placed sample exactly 15.1 cm from detector and took 3-5 consecutive spectra. Experiment

  10. Decay Scheme ENDSF website

  11. Data We used two spectra from our CsCl source and one from the CsNO3 source. 134Cs

  12. 137Ba

  13. Impurity Analysis We used nuclide and radiation searches in order to identify the peaks caused by the impurities. For the searches we used the Nuclear Science Division LBNL website.

  14. TORI Data (1999) Gammas from 122Sb (2.7238 d 2) If we can make an educated guess as to what the impurity is we can use an nuclide search to confirm its identity. For instance if we guess that the peak is 122Sb then we can see from the nuclide search there should also be a peak at 564.1. The ratios of the areas of the two peaks should also correspond with that ratio of the intensities 71 and 3.85. * Tables from LBNL website If we don’t have a have any solid ideas about what impurity causes the peak then we can use a radiation search to look for possible nuclides. The nuclides found are then tested using the same methods as before.

  15. Impurity Analysis The major impurities found were 56Mn, 122Sb, 124Sb, 134Cs, 82Br and 80Brm .

  16. After finding all the impurities, we checked to see which impurities could have peaks that would over lap with the peaks we are concerned about (~30-35 keV, 127keV). In our case 122Sb, 124Sb and 80Brm had peaks that could overlap with our peaks of interest. It is important to note that the actual overlap is quite small but because we want a very exact measurement we correct for the added area to our peaks.

  17. Calculations/Results K-shell ICC fluorescence yield peak area detector efficiency Subscript K designates K-x rays, which result from internal conversion, and subscript designates the transition -rays N

  18. The efficiency of our detector is not well known for energies less than 50 keV. Since our K-x rays are less than 50 keV we used a ratio of ICCs of 134Cs to 137Ba in order to minimize our uncertainty. 137Ba was used because it has K-x rays at almost the exact same energies as 134Cs. From the figure you can see the ratio of 137Ba and you can also see how closely the K-x rays overlap so that the efficiency are nearly the same.

  19. Ratio of the ICC of 134Cs to 137Ba The subscript 1 indicates 134Ce and the subscript 2 indicates 137Ba

  20. Conclusions • From our experiment we can see that the experimental value for the ICC of 134Cs in Raman et al, Phys. Rev. C 66, 044312 (2002) was incorrect. • This results together with our earlier measurement of 193mIr indicates that the conclusion drawn in this paper needs to be re-examined and more precise measurements are needed. • Next we plan on examining the ICC of 139La

  21. John C. Hardy, Ninel Nica, and the rest of the wonderful research group I was working with. National Science Foundation, REU Summer Program Under Grant NO# 463291-00001 Texas A & M Cyclotron Institute Mount Holyoke College, Physics Department Lesilie Speikes for always unlocking the door for us. Acknowledgements

More Related