1 / 5

Removing 36 hours from a workover Optimising rig time using LWIV & eRED technology

Slide 1. Removing 36 hours from a workover Optimising rig time using LWIV & eRED technology. Presented by: Andy Skinner Date: 9 th March 2011. Slide 2. Workover or well abandonment. LWIV – up front work in advance of drilling rig Conventional subsea vertical dual-bore tree

moeshe
Télécharger la présentation

Removing 36 hours from a workover Optimising rig time using LWIV & eRED technology

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Slide 1 Removing 36 hours from a workover Optimising rig time using LWIV & eRED technology Presented by: Andy Skinner Date: 9th March 2011

  2. Slide 2 Workover or well abandonment LWIV – up front work in advance of drilling rig Conventional subsea vertical dual-bore tree Install deep barrier, cut tubing and circulate to kill fluid Set shallow barrier in hanger – annular string Set shallow barrier c/w eRED in hanger – tubing string eRED? – Electronic Remote Equalisation Device: ball type downhole barrier, remotely opened and closed up to 50 times over 6-9 months. Remove tree – install debris cap Return to base – tree sent for refurbishment

  3. Slide 3 Workover or well abandonment Drilling rig – when available move on site & pull completion Remove debris cap – install BOP’s Latch tubing hanger on drill pipe: no need for dual bore riser to remove hanger barriers Apply pressure command to open eRED Tubing & annulus now equalised Close BOP rams onto drill pipe – unseat hanger Vent gas cap & circulate top hole clean Open BOP rams – pull completion

  4. Slide 4 Workover or well abandonment Value highlights LWIV & eRED Reduction in intervention and exposure to weather: PCE rig up/down and pulling operations (10 hours ) Remote equalisation – no intervention once eRED has opened No wireline – no need to run Dual Bore Riser: riser deployment/test ( 26 hours ) Completion pulled on drill pipe Rig time savings in excess of 36 hours have been achieved

  5. Slide 5 Completion deployment What’s next? If new completion is being installed Drilling rig installs and tests new completion Shallow & deep barriers run as part of completion – tubing mounted full bore eRED Install debris cap – drilling rig moves on to next well LWI moves to well site within 9 -12 months Remove debris cap – install tree and test Apply pressure commands to remotely open shallow & deep barriers Well brought on stream with no slickline intervention Questions?

More Related