1 / 64

Perspectives of tearing modes control in RFX-mod

Perspectives of tearing modes control in RFX-mod. Paolo Zanca Consorzio RFX, Associazione Euratom-ENEA sulla Fusione, Padova, Italy. RFX-mod contributions to TMs control (I). Demonstrated the possibility of the feedback control onto TMs

morela
Télécharger la présentation

Perspectives of tearing modes control in RFX-mod

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Perspectives of tearing modes control in RFX-mod Paolo Zanca Consorzio RFX, Associazione Euratom-ENEA sulla Fusione, Padova, Italy

  2. RFX-mod contributions to TMs control (I) • Demonstrated the possibility of the feedback control onto TMs • Clean-Mode-Control (CMC) based on the de-aliasing of the measurements from the coils produced sidebands

  3. RFX-mod contributions to TMs control (I) • Demonstrated the possibility of the feedback control onto TMs • Clean-Mode-Control (CMC) based on the de-aliasing of the measurements from the coils produced sidebands • Not obvious results: phase-flip instability?

  4. RFX-mod contributions to TMs control (I) • Demonstrated the possibility of the feedback control onto TMs • Clean-Mode-Control (CMC) based on the de-aliasing of the measurements from the coils produced sidebands • Not obvious results: phase-flip instability? • No-sign of phase-flip instability; equilibrium condition can be established where CMC induces quasi-uniform rotations of TMs

  5. RFX-mod contributions to TMs control (II) • Wall-unlocking of TMs with CMC • In general, the feedback cannot suppress the non-linear tearing modes requested by the dynamo. • The feedback keeps at low amplitude the TMs edge radial field • Improvement of the magnetic structure: sawtooth of the m=1 n=-7 which produces transient QSH configurations

  6. CMC optimizations • Increase the QSH duration → recipes under investigation • Which are the possibilities to reduce further the TMs edge radial field? → Model required

  7. RFXlocking • Semi-analitical approach in cylindrical geometry • Newcomb’s equation for global TMs profiles • Resonant surface amplitudes imposed from experiments estimates • Viscous and electromagnetic torques for phase evolution • Radial field diffusion across the shell(s) • Feedback equations for the coils current • It describes fairly well the RFX-mod phenomenology →L.Piron talk

  8. General analysis of the TM control

  9. Single-shell external coils Sensors Vessel Coils plasma

  10. Normalized edge radial field • The feedaback action keeps low the normalized edge radial field • At best b^senscan be made close but not smaller than the ideal-shell limit

  11. Feedback limit Sensors Vessel Coils plasma

  12. Feedback limit Sensors Vessel Coils plasma

  13. Feedback limit Sensors Vessel Coils plasma br=0 everywhere: impossible

  14. Role of the Vessel • The stabilizing effect of the vessel is crucial for having low b^sensand moderate power request to the coils • The shorterτwthe faster must be the control system (fc=1/Δt) to avoid feedback (high-gain) induced instabilities • Optimum range:τw>10ms better τw 100ms

  15. Single-shell Internal coils Coils Sensors Vessel plasma

  16. Single-shell Internal coils Coils Sensors Vessel plasma

  17. Single-shell Internal coils • Continuous-time feedback → solution ωω0 with br(rsens) 0 for large gains • Discrete-time feedback : including the latency Δt the high-gain instability may occur • The good control region is not accessible for realistic TM amplitudes. • For stable gains b^sensis determined by the ideal-shell limit, which is large due to the loose-fitting vessel required by the coils dimension

  18. RFP design for good TM control (a personal view)

  19. Premise • The passive stabilization provided by a thick shell does not solve the wall-locking problem • In the thick-shell regime wall-locking threshold ~σ1/4 • Feedback is mandatory to keep TMs rotating

  20. Design in outline • In-vessel coils not interesting • Single structure (vessel=stabilizing shell) with the coils outside • Close-fitting vessel to reduce the ideal-shell limit • τw10ms-100ms withΔt10μs-100μs

  21. RFX-mod perspectives (a personal view)

  22. RFX-mod layout • 3ms vacuum-vessel, 100ms copper shell, ~25ms mechanical structures supporting the coils • The control limit is mainly provided by the 100ms copper shell

  23. RFX-mod status Gain optimization guided by RFXlocking simulations for the RFX-mod case m=1 TMs

  24. Optimizations • Get closer to the ideal-shell limit (minor optimization) • Reduce the ideal-shell limit by hardware modifications (major optimization)

  25. Minor optimizations • Increase the coils amplifiers bandwidth: maximum current and rensponse time • Acquisition of the derivative signal dbr /dt in order to have a better implementation of the derivative control (to compensate the delay of the coils amplifiers) • Compensation of the toroidal effects by static decoupler between coils and sensors only partially exploited • Compensation of the shell non-homogeneities requires dynamic decoupler (work in progress)

  26. Majoroptimization • Approach the shell to the plasma edge possibly simplifying the boundary (removing the present vacuum vessel which is 3cm thick) • Moving the τw=100msshell from b=0.5125m to b=0.475m (a=0.459) a factor 3 reduction of the edge radial field is predicted by RFXlocking

  27. Conclusions • CMC keeps TMs into rotation • Edge radial field: ideal-shell limit found both with the in-vessel and out-vessel coils → br(a)=0 cannot be realized • The vessel=shell must be placed close the plasma → coils outside the vessel. Is a close-fitting vessel implementable in a reactor? • The feedback helps the vessel to behave close to an ideal shell→ τw cannot be too short

  28. spare

  29. Edge radial field control by feedback

  30. RFXlocking .vs. experiment

  31. Normalized edge radial field: weak brs dependence

  32. br(rm,n) vs br(a) experimental

  33. Locking threshold The present analysis valid for dw<<rw cannot be extrapolated to very long tw

  34. Edge radial field .vs. current time constant

  35. Single mode simulations: external coils a = 0.459m rw i = 0.475m c = 0.5815m

  36. Single-mode analysis: feedback performances dependence on tw

  37. Single-mode analysis: feedback performances dependence on tw

  38. Multi-mode analysis: power dependence on tw

  39. Edge radial field: tw dependence Data averaged on 0.1s simulation m=1

  40. Normalized edge radial field: rwi dependence m=1

  41. Normalized edge radial field: no rf dependence m=1

  42. Out-vessel coils: signals 4x48 both for coils (c = 0.5815m) and sensors (rwi = 0.475m )

  43. Single-shell: discrete feedback Δt = latency of the system

  44. External coils: discrete feedback τw=100ms

  45. External coils: discrete feedback τw=10ms

  46. External coils: discrete feedback τw=1ms

  47. The in-vessel coils

  48. Single mode simulations: frequency τw= 1ms100ms

  49. Single mode simulations: Ic, Vc

  50. Single mode simulations: edge br

More Related