1 / 10

MCP-220-51201-0N installation guide

MCP-220-51201-0N installation guide. Rech Weng. 1. 2. 5. 3. 6. 10. 7. 11. 4. 8. 9. 12. Mount left bracket. Mount the left bracket (2) with 2x M4 screws (11) on DVD. Mount right bracket. Mount the right bracket (1) with 2x M4 screws (11) on DVD. Mount backplane left side.

Télécharger la présentation

MCP-220-51201-0N installation guide

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. MCP-220-51201-0N installation guide Rech Weng

  2. 1 2 5 3 6 10 7 11 4 8 9 12

  3. Mount left bracket Mount the left bracket (2) with 2x M4 screws (11) on DVD

  4. Mount right bracket Mount the right bracket (1) with 2x M4 screws (11) on DVD

  5. Mount backplane left side Insert spacer (5) into left hole of backplane (4) and then install the backplane on the back of DVD Screw the left hole with M2 screw (9)

  6. Mount backplane right side Screw the right hole with M3 screw (7)

  7. Install standoff (10) on the motherboard

  8. Place DVD on the MB and HDD Plug the DVD cable (3) on the backplane. Hook both front sides of DVD assembly on the front panel opening Screw the DVD assembly on the standoff with 6#32 screw (6)

  9. Mount with chassis wall Screw the DVD assembly on the left side wall of chassis with flat head 6#32 screw (8)

  10. Dummy board (12) When chassis has no MB inside or the MB is very small, standoff will need this dummy beneath to keep its height. 

More Related