1 / 9

MAC Withdraw Signaling for static PW draft-boutros-l2vpn-mac-wd-03.txt

MAC Withdraw Signaling for static PW draft-boutros-l2vpn-mac-wd-03.txt. Himanshu Shah - Ciena Siva Sivabalan , Sami Boutros – Cisco Sam Aldrin - Huwei. Brief History. This draft was first introduced in 2011 Service Providers requesting this feature

mura
Télécharger la présentation

MAC Withdraw Signaling for static PW draft-boutros-l2vpn-mac-wd-03.txt

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MAC Withdraw Signaling for static PWdraft-boutros-l2vpn-mac-wd-03.txt Himanshu Shah - Ciena Siva Sivabalan, Sami Boutros – Cisco Sam Aldrin - Huwei

  2. Brief History • This draft was first introduced in 2011 • Service Providers requesting this feature • Presented details in IETF-88 and was well received • Added a new author • Sam Aldrin - Huweii

  3. Solution Overview • MAC withdraw signaling for dynamic PW is described in RFC 4762. It mitigates black holing of the traffic when dual-homed MTU-s switches over to standby PW • RFC 6478 describes PW status exchange in-band over the OAM channel with acknowledgements from the receiver. The draft uses the similar mechanisms for MAC withdraw signaling.

  4. MAC Withdraw signal • Sent over OAM channel with sequence number and MAC list TLV as defined in RFC 4762. • Receiving PE sets the ACK bit in the response • In absence of ACK, sender retries 3 times at one second interval • An ACK receipt with higher sequence is implicit ACK for all lower sequence sends • MAC List Optimization is supported as per http://tools.ietf.org/html/draft-ietf-l2vpn-vpls-ldp-mac-opt-08

  5. PE-1 PE-2 PE-3 PE-4 PE-5 PE-6 MAC Withdraw signaling – use case M T U Static PW Primary spoke PW Standby spoke PW Mesh PW MAC withdraw signal

  6. Reset Sequence Number • The version 03 added logic to signal resetting of the sequence number • A reset bit is defined in the MAC WD signal • Needed when a static PW is reset by way of node restart or other configuration changes • Local node notifies peer to reset send and expected receive sequence number • This mechanism prevents peer to ignore lowered sequence number MAC WD message from the reset’dnode

  7. Reset logic Node A Node B MAC WD, Seq# 1 Exprecvseq# 2 MAC WD ACK Seq# 1 MAC WD, Seq# 10 Exprecvseq# 11 MAC WD ACK Seq# 10 Static PW Reset MAC WD, Seq# 1 Ignore!!!! Less than expected 11 Solution MAC WD, Seq# 1, R-Bit Set Reset send & receive seq# Exprecvseq# 2 MAC WD ACK Seq# 1, R-bit set

  8. Use case • MPLS-TP deployments are taking hold in access networks • Static provisioning for PWs dovetails to static LSPs • This necessitates need for PW status (already an RFC) as well as MAC withdraw signaling for H-VPLS deployments with dual-homing

  9. Summary • Request to adopt as WG document • Reserve ACH channel type 0x28 • Comments?

More Related