1 / 4

Background of Connector Scenario for Worst Case proposal Used Probability Density Function

Background of Connector Scenario for Worst Case proposal Simulations for the 10GbE Base SR (850nm, 50µm-MM-Fiber). In the Modeling for the specification of the 10GBit/s transmission on the 50µm multimode fiber was used the following statistics for the connector offsets:

nathan
Télécharger la présentation

Background of Connector Scenario for Worst Case proposal Used Probability Density Function

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Background of Connector Scenario for Worst Case proposalSimulations for the 10GbE Base SR (850nm, 50µm-MM-Fiber) • In the Modeling for the specification of the 10GBit/s transmission on the 50µm multimode fiber was used the following statistics for the connector offsets: (see Pepeljugoski et.al., JLT, Vol.21, No.5, May 2003, p.1256) Rayleigh Distribution of connector offsets: Mean value of 3,58µm, Probability of exceeding 7µm offset is: 5% This distribution is used for the current worst case model.

  2. Background of Connector Scenario for Worst Case proposalUsed Probability Density Function

  3. Background of Connector Scenario for Worst Case proposalIdea of a Set of Different Connector Offsets • The combination of short – long – short fibers with 4 connectors seems to be a standard application configuration • The selected worst case should have a low but reasonable probability for the selected set of offsets. • If one 7µm offset connector has p=0.05 than a set of 4 connectors with 7µm offset have the probability of p= 0.054 = 6 x10-6 which is extremely low. • Therefore we chose the offset of the second connector at a value where two connectors of the same offset have the probability of p=0.05, • The third offset at the value for three connectors with same offset of p=0.05, • And similar for the fourth offset.

  4. Background of Connector Scenario for Worst Case proposalProbability Function with Multiple Connectors Probability of 5%: 1 connector : offset 7 µm 2 connectors: offset 5 µm 3 connectors: offset 4 µm 4 connectors: offset 3,5µm Overall probability of the combination of one connector of each offset: P=0.05%

More Related