1 / 9

Chapter 2 - The CRA-1

Chapter 2 - The CRA-1. Useful while learning OS basics to use a reference computer system Book creates a Composite RISC Architecture (CRA-1) computer system (implicit homage to Cray-1? :) Simple organization: Figure 2.1 CRA-1 CPU 32 general-purpose 32-bit registers, r0 through r31

nellis
Télécharger la présentation

Chapter 2 - The CRA-1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 2 - The CRA-1 • Useful while learning OS basics to use a reference computer system • Book creates a Composite RISC Architecture (CRA-1) computer system (implicit homage to Cray-1? :) • Simple organization: Figure 2.1 • CRA-1 CPU • 32 general-purpose 32-bit registers, r0 through r31 • Note register usage on page 17

  2. CRA-1 CPU (continued) • 9 control registers: • ia = instruction address register (Program Counter) • psw = program status word (1 bit for system/user mode; 1 bit for interrupts enabled/disabled) • base = per memory reference adder value • bound = per memory reference upper bounds check • iia = interrupt instruction address register; holds value of ia before an interrupt is taken • ipsw = interrupt program status word; holds value of psw before an interrupt is taken • ip = interrupt parameter register; info about last interrupt • iva = interrupt vector address register; address of the interrupt vector table (jump table) • timer = interrupt timer register (autodecremented once every µsecond); timer interrupt automatically occurs when timer reaches 0

  3. CRA-1 CPU (continued) • Processor supports dual-mode operation: • System mode (bit 0 of psw = 0) - all instructions are legal and all addresses are physical (base and bound are not used) • User mode (bit 0 of psw = 1) - instructions that modify control registers are illegal; all addresses must be less than bound and have base added to them • Subset of instructions that are important to OS: • Table 2.1 - note interesting ones: • loadAll address ; load all 32 regs in one shot • storeAll address ; store all 32 regs in one shot • move rM,rN ; move any reg to any other reg • syscall ; request sys service via S/W interrupt • rti ; return from interrupt (restore psw, etc.)

  4. CRA-1 CPU (continued) • Note use of asm directive to place in-line assembly code in the middle of, say, C++ code: SetTimer(int TimerValue) { asm { move timerValue,timer } } • CRA-1 Memory • byte-addressed machine • 32-bit addresses • Simple form of memory protection using base and bound when in user mode; if either fails program is aborted and ip is set to 2

  5. CRA-1 Memory • Memory address space is from absolute address 0 to absolute address 0xEFFF FFFF • I/O address space is from abs 0xF000 0000 to 0xFFFF FFFF • Consider the machine to only have 16 MB, in which case memory address is limited to abs addresses 0 to 0xFF FFFF • CRA-1 Interrupt Structure • An interrupt is an immediate asynchronous transfer of control caused by an event external to the CPU

  6. Interrupt Structure (continued) • Causes of interrupts: • System call (syscall instruction) • Timer expires (value of timer register reaches 0) • Disk I/O completed • Program performed an illegal operation: • ip = 0 : attempted to execute an undefined instruction • ip = 1 : attempted to execute a system instruction while in user mode • ip = 2 : address out of bounds while in user mode (address is less than base or greater than bound)

  7. Interrupt Structure (continued) • CRA-1 Interrupt Handling - when one of the four types of interrupts occurs the following steps are taken (ref. Table 2.2 for interrupt vector table): • ipsw <- psw (save current program state) • psw <- 0 (set to system mode; disable future interrupts) • ip <- interrupt parameter (if appropriate, e.g. - program error) • iia <- ia (save current execution address) • ia <- (interruptNumber * 4) + iva (control passes to the appropriate interrupt routine via the interrupt vector table) • After the interrupt handler routine is done, it issues the rti instruction, which returns control & state to the point of execution prior to the interrupt • ia <- iia • psw <- ipws • Restore any regs that may have been used

  8. Interrupt Structure (continued) • If bit 1 of psw = 0, interrupts are masked (recorded but not taken until interrupts are re-enabled) • Only the Timer and Disk interrupts are maskable; the SysCall and ProgramError interrupts are unmaskable (will always generate an interrupt) • The Timer interrupt has a higher priority than the Disk interrupt • Note that the CRA-1 interrupt structure, while providing enough structure to demonstrate the intimate relationship between hardware and the OS, is pretty simplistic given most computers

  9. CRA-1 I/O Devices • Memory-mapped I/O vs Explicit I/O instructions • Program writes I/O instructions to specific memory locations and reads other specific memory addresses to receive information from I/O devices • CRA-1 has one disk controller with one hard disk drive • Disk drive has 4,096-byte blocks (aka sectors) • Two I/O commands for disk controller: read block and write disk block • Note OS-style C++ code using memory-mapped I/O in Figure 2.2; Chapter 14 has an excellent quick overview of “real world” I/O devices

More Related