1 / 10

Levitation Clock P13321

Levitation Clock P13321. Trong Duong – Electrical Engineer Kevin Fronczak – Electrical Engineer Holden Sandlar – Electrical Engineer. Final Project Review – MSD II. Project Description . A clock that uses levitation to tell time. Appear “magical” to the observer

nixie
Télécharger la présentation

Levitation Clock P13321

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Levitation ClockP13321 Trong Duong – Electrical Engineer Kevin Fronczak – Electrical Engineer Holden Sandlar – Electrical Engineer Final Project Review – MSD II

  2. Project Description • A clock that uses levitation to tell time. • Appear “magical” to the observer • Design a clock that would look cool and aesthetically pleasing as a display unit

  3. Customer needs and Engineering Specifications

  4. Original Concept

  5. Final Design Concept

  6. Operation

  7. Build Process • PCBs fabricated and ordered via OSHPark • Wood Frame built by Byron Conn • Glass Tubes purchased. Cut, rounded, and annealed by Tom Zogas • Tube Support Rings 3D printed by Vince Burolla • Levitating Objects cut from high-density foam

  8. Test Process • Verify User Interface Operation • Verify Main Controller Signal Routing • Verify RTC Functionality • Tune Solenoid Lift Height • System Integration Testing

  9. Temperature Test • Ran clock in “Test Mode” at Imagine RIT • 7 hours

  10. Lessons Learned • Temperature/Heat dissipation big concern • Molex KK connectors should NEVER BE USED • They were manufactured by Satan himself • Hand-winding coils imprecise and tedious • If something looks like it COULD be touched, someone will ALWAYS TOUCH IT • Triple-check BOM entries after design changes • Ordering incorrect package size or wrong regulator very easy to do • Quadruple check PCB layout • Helps avoid rework • Missing standoffs on main board

More Related