1 / 13

1-D conduction through cylinders

Lecture on. 1-D conduction through cylinders. Topics Covered. Composite Cylinders Log Mean Area for hollow cylinder – plane wall Critical thickness of insulation HT through Sphere. h 1. r 1. T ∞,1. r 2. h 2. T ∞,2. k 1. r 3. k 2. T ∞,1. T ∞,2.

noble-osborne
Télécharger la présentation

1-D conduction through cylinders

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lecture on 1-D conduction through cylinders

  2. Topics Covered • Composite Cylinders • Log Mean Area for hollow cylinder – plane wall • Critical thickness of insulation • HT through Sphere

  3. h1 r1 T∞,1 r2 h2 T∞,2 k1 r3 k2 T∞,1 T∞,2 1 D Conduction(Radial conduction in a composite cylinder)

  4. Logarithmic Mean area for hollow cylinder • Convenient to have an expression for heat flow through hollow cylinder of the same form as that of for a plane wall. • Then cylinder thickness will be equal to wall thickness, • Area will be equal to Am

  5. Logarithmic Mean area for hollow cylinder

  6. Critical Insulation Thickness • Insulation: A material which retard flow of heat either from surrounding to system or vice versa, with reasonable effectiveness is called insulation. • Applications: • Boilers, steam pipe • Insulating brick • Preservation of food and commodities • Refrigeration & Air conditioning • Condensers • Common Belief: addition of insulation material on surface always leads to lower Heat loss • there are instances when addition of insulation material does not reduce Heat loss

  7. Critical Insulation Thickness • For cylindrical pipes, HT increasing first, then decreasing. • addition increases conduction resistance, • but decreases convection resistance due to surface area exposed to environment. • Total thermal resistance decrease resulting in increase in heat loss. • From outer surface of insulation heat is dissipated to environment by convection. • As the thickness goes on increasing, area of outer surface increases, which is responsible for more heat loss thru convection

  8. T∞ r0 ri h Ti Critical Insulation Thickness Insulation Thickness : r o-r i Objective :decrease q , increases Vary r0 ; as r0 increases ,first term increases, second term decreases.

  9. CRITICAL RADIUS OF INSULATION CYLINDER Thermal conductivity External convection heat transfer coefficient show

  10. Set Critical Insulation Thickness • Condition for minimum resistance and consequently max HT • Radius at which resistance to HT is minimum is called critical radius

  11. CHOSING INSULATION THICKNESS max Before insulation check for critical radius

  12. R t o t good for electrical cables good for steam pipes etc. R c r=k/h r0 Critical Insulation Thickness (contd…) Minimum q at r0 =(k/h)=r c r (critical radius)

  13. r2 r1 k T∞,2 Ts,2 Ts,1 T∞,1 1D Conduction in Sphere Inside Solid:

More Related