1 / 26

Rate Constant Determination for Saponification in Batch CSTR

omer
Télécharger la présentation

Rate Constant Determination for Saponification in Batch CSTR

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


    1. Rate Constant Determination for Saponification in Batch & CSTR February 17, 2005 Presentation by Trevor Binney

    2. Group Members Jay Berndt Me Eric Houchin Operations Manager Team Leader Safety Coordinator

    3. Presentation Plan Familiarize audience with saponification Discuss the project objectives Overview of process and equipment used Batch and CSTR kinetic data results Difficulties encountered during lab work Give recommendations for future work Answer any questions the audience have

    4. Nomenclature CSTR- Continuous Stirred Tank Reactor EtAc- Ethyl Acetate NaAc- Sodium Acetate EtOH- Ethyl Alcohol (Ethanol) PPE- Personal Protective Equipment Soln- Solution Xa- Extent of Reaction of NaOH Conc- Concentration in mol/L Ca- mol/L NaOH

    5. What is Saponification, and what is it used for? http://www.dictionary.com/ defines saponification as: A reaction in which an ester is heated with an alkali, such as sodium hydroxide, producing a free alcohol and an acid salt, especially alkaline hydrolysis of a fat or oil to make soap. EtAc + NaOH ? NaAc + EtOH CH3COOC2H5 + NaOH ? CH3COONa + C2H5OH Saponification is primarily used for the production of soaps.

    6. Project Objectives Our team was asked to meet several goals while running saponification experiments Develop conductivity calibration curves for the reactants used in the process. (NaOH & EtAc) Verify feed concentration through standardization using titration Determine the true rate constant for reaction in a batch reactor Obtain reaction rate data for the CSTR as a function of the solution residence time

    7. Safety Considerations NaOH- Corrosive EtOH & EtAc- Flammable EtAc will corrode various plastics Standard PPE worn, as well as face shield and rubber gloves for handling dangerous chemicals. Clean up spills and broken glass immediately Be aware of where other people in the lab are Open windows for ventilation and work under the fume hood when mixing solutions

    8. Assumptions Conductivities EtAc & EtOH negligible Solution inside the CSTR is well mixed Solution inside batch reactor well mixed Ethyl acetate bottle wasnt contaminated Liquid pulled from the 1 M EtAc is 1 M The CTSR flow meters were accurate Conductivity linearly proportional to Conc

    9. Conductivity Probe Calibration

    10. Conductivity Probe Calibration

    11. Xa & Conc Solved w/ Conductivity NaOH conductivity: 214*(conc NaOH) mS/m NaAc conductivity: 78*(conc NaAc) mS/m EtAc & EtOH conductivity: negligible Overall conductivity: Ca0*(214-136*Xa) Where Xa = (Ca0 Ca) / Ca0

    12. Continuous Stirred Tank Reactor

    13. CSTR procedure Enter setpoint temperatures using set point 2 Drain reactant tanks as much as possible Prepare three liters of reactant solutions Fill tanks equally and heat to set temp Make sure the bottom reactor drain is closed Turn on the CSTR stirring device Open the flow valves to equal levels Wait until SS reached and record conductivity using a calibrated conductivity probe

    14. Batch Reactor and Heating Bath

    15. Batch Procedure Preheat bath to desired reaction temp Prepare the NaOH and ethyl acetate solutions Fill two erlenmeyer flasks, one with NaOH and the other with EtAc Allow reactants to heat to desired temp Pour one flask into the other submerged flask Using the conductivity probe, record conductivities of the solution every 15 seconds Record data until the conductivity stabilizes

    16. Equations Used for Data Analysis Arrhenius law: k = k0e-E/RT ln(k2/k1)=E/R*(1/T1 1/T2) Ca0*(214-136*Xa) Xa = (Ca0 Ca)/Ca0 Ca = (Cond/Ca0 214)*Ca0/136 + Ca0

    17. Results and Conclusions

    18. Results and Conclusions

    19. Results and Conclusions (k) Determined rate constant for saponification Experimental k = 0.178 L/mol*sec @ 30 C Experimental k = 0.192 L/mol*sec @ 45 C As listed in in the Bulletin of the Chemical Society of Japan k = 0.112 L/mol*sec According to this source, the rate constant we determined was about 59% too large A possible reason for this is that the EtAc solution concentration was higher than predicted

    20. CSTR Results and Conclusions Data recorded was very inconsistent For equal feed concentrations, we had runs that yielded conductivities of 6-7 mS and also 3 mS/m, with no results falling in between Reagent bottle contamination? Inability to completely drain feed tanks Difficulty in maintaining stirring speed CSTR operations were abandoned for the final lab period to focus on Batch data

    21. Temperature Dependence Results Multiple trials were run at both 30 & 45 C Arrhenius law: k = k0e-E/RT Rewritten: ln(k2/k1)=E/R*(1/T1 1/T2) R = 8.314 J/mol*K E = Activation energy of this reaction We were unable to find the value for E in literature k30 = 0.178 L/mol*sec < k45 =0.192 L/mol*sec Experimental E = 4040 J/mol

    22. Overall Conclusions Saponification rxn is a 2nd order reversible reaction (1/Ca vs time linear at low time) -Ra = k*Ca*Cb Considerable error comparing experimental rate constant to that in literature Batch data fairly reproducible and precise CSTR data and operation inconsistent

    23. Difficulties Encountered During Lab Creation and mixing of ethyl acetate solns Attempted creation of 1 M stock solution Attempted to dissolve 9.6 g EtAc/100 mL Max Solubility of EtAc in water is 8 g/100 mL Possible reagent bottle contamination Evident through formation of unknown precipitate CSTR temperature reading inconsistency Inability to completely drain CSTR tanks

    24. Recommendations For Future Work Do research before entering the lab Become familiar with analytical equipment Begin trials with CSTR as early as possible Split up tasks for each person to do during lab prior to running the labs Make an in depth Design of Experiment before entering the lab

    25. References Levenspiel, Octave. Chemical Reaction Engineering, Third Edition. USA: John Wiley & Sons, 1999. Levenspiel, Octave. The Chemical Reactor Omnibook. Corvallis, OR: OSU Book Stores, 2002. Pecaj, Arta. Personal Interview. February 16, 2005. Tsujikawa, H. and Inoue, H. 1965. The Rate of the Alkaline Hydrolysis of Ethyl Acetate. Bulletin of the Chemical Society of Japan. 39: 1837-1839 http://www.woodlandsinstruments.com/conductivity_values.htm

    26. Questions ??

More Related