1 / 12

Powers of 2

Powers of 2. 1010010100011011 A 1 in the binary number is that place value’s power of 2 in decimal: 2 15 2 14 2 13 2 12 2 11 2 10 2 9 2 8 2 7 2 6 2 5 2 4 2 3 2 2 2 1 2 0

onaona
Télécharger la présentation

Powers of 2

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Powers of 2

  2. 1010010100011011 A 1 in the binary number is that place value’s power of 2 in decimal:215 214 213 212 211 210 29 28 27 26 25 24 23 22 21 20 32,768 16,384 8192 4,096 2,048 1,024 512 256 128 64 32 16 8 4 2 1 1 0 1 0 0 1 0 1 0 0 0 1 1 0 1 1 Just add up the place values with 1’s: 32,768 + 8192 + 1,024 + 256 + 16 + 8 + 2 + 1 = 91,419 Binary to Decimal Conversion

  3. 12,472 Keep subtracting the highest place value that will leave a positive remainder, until the remainder is zero. If you subtract a place value, put a 1 at that place value in the binary number. If you can’t subtract a place value, put a 0 at that place value in the binary number. The most common mistake is to forget a place value, especially on the right: | read down | v v213 = 8,192 Highest place value, subtract it: 12,472 – 8192 = 4280 results in 1212 = 4,096 Can be subtracted from remainder: 4,280 – 4096 = 184 results in 1 211 = 2,048 Remainder is too small to subtract. results in 0 210 = 1,024 Remainder is too small to subtract. results in 0 29 = 512 Remainder is too small to subtract. results in 0 28 = 256 Remainder is too small to subtract. results in 0 27 = 128 Can be subtracted from remainder: 184 – 128 = 56 results in 126 = 64 Remainder is too small to subtract. results in 0 25 = 32 Can be subtracted from remainder: 56 – 32 = 24 results in 124 = 16 Can be subtracted from remainder: 24 – 16 = 8 results in 1 23 = 8 Can be subtracted from remainder: 8 – 8 = 0 results in 1 22 = 4 Remainder is too small to subtract <= don’t forget these! results in 0 21 = 2 Remainder is too small to subtract <= don’t forget these! results in 0 20 = 1 Remainder is too small to subtract <= don’t forget these! results in 0 The answer is the binary digits, in order, with the highest place value to the left:1000010111000 Decimal to Binary Conversion

  4. Digits Hex Dec Binary 0 = 0 = 0000 1 = 1 = 0001 2 = 2 = 0010 3 = 3 = 0011 4 = 4 = 0100 5 = 5 = 0101 6 = 6 = 0110 7 = 7 = 0111 8 = 8 = 1000 9 = 9 = 1001 A = 10 = 1010 B = 11 = 1011 C = 12 = 1100 D = 13 = 1101 E = 14 = 1110 F = 15 = 1111 Conversion from Binary to Hexadecimal (Hex to Binary conversion is just the opposite) : 111001010001101110101110100010 Split into groups of four, right to left: 11 1001 0100 0110 1110 1011 1010 0010 Put enough zeros on the far left to fill the left group: 0011 1001 0100 0110 1110 1011 1010 0010 Convert to Hexadecimal by replacing each group with the correct single hex digit: 3 9 4 6 E B A 2 Hexadecimal equivalent (represents 32 bit word): 3946 EBA2 Hexadecimal

  5. Metric Prefixes (whole numbers)

  6. Metric Prefixes (fractions)

  7. y = log(x) with x and y axes equal linear scale

  8. y = log(x) with x and y axes linear scaley axis expanded

  9. y = log(x) with x axis logarithmic scale and y axis linear

  10. Bels and deciBels (positive)

  11. Bels and deciBels (negative)

  12. dB references • dBW – dB Watts (0dBW = 1 Watt) • dBm – dB milliWatts (0dBm = 1/1000 Watt) • dBi – antenna gain (0dBi = the field intensity of an isotropic antenna at a given input power and frequency) • An isotropic antenna is a simple straight wire antenna without any physical modifications. • A differently shaped antenna’s field intensity is measured and compared to the isotropic antenna at the same input power and frequency. The ratio is expressed in deciBels as dBi.

More Related