1 / 4

PWE3 MPLS and Ethernet OAM Interworking draft-ietf-pwe3-mpls-eth-oam-iwk-02.txt

PWE3 MPLS and Ethernet OAM Interworking draft-ietf-pwe3-mpls-eth-oam-iwk-02.txt. Dinesh Mohan (Nortel) Nabil Bitar (Verizon) Philipe Niger (France Telecom) Simon Delord (Telstra) Ali Sajassi (Cisco) Ray Qiu (Huawei) March 2010 IETF 77, Anaheim, California , USA. Objectives.

onslow
Télécharger la présentation

PWE3 MPLS and Ethernet OAM Interworking draft-ietf-pwe3-mpls-eth-oam-iwk-02.txt

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PWE3 MPLS and Ethernet OAM Interworkingdraft-ietf-pwe3-mpls-eth-oam-iwk-02.txt Dinesh Mohan (Nortel) Nabil Bitar (Verizon) Philipe Niger (France Telecom) Simon Delord (Telstra) Ali Sajassi (Cisco) Ray Qiu (Huawei) March 2010 IETF 77, Anaheim, California , USA draft-ietf-pwe3-mpls-eth-oam-iwk-02.txt

  2. Objectives • Define failure detection and notification procedures between Ethernet PWs and associated native Ethernet Acs • Defect State mapping between Ethernet PWs and associated Ethernet ACs • OAM message mapping between various Ethernet OAM mechanisms (e.g., 802.1ag) and PW OAM mechanisms (e.g., BFD) • Extensions to draft-ietf-pwe3-oam-msg-map-11.txt , "Pseudo Wire (PW) OAM Message Mapping", focusing on Ethernet PW services • Use same terminology and reference model for defect state mapping draft-ietf-pwe3-mpls-eth-oam-iwk-02.txt

  3. Main Changes From version 00 to 01/02 • Ray Qiu (Huawei) joined as a co-author • Aligned defect state terminology with updated definitions in draft-ietf-pwe3-oam-msg-map-11 from earlier versions • Forward defect state changed to receive defect state • Reverse defect state changed to transmit defect state • Added CCM interface status TLV as a trigger to enter/exit AC receive defect state • Interface down  enter receive defect state • Interface up  exit receive defect state draft-ietf-pwe3-mpls-eth-oam-iwk-02.txt

  4. Next Steps • Address Greg Mirsky’s comments on the mailing list • A couple edits needed • Issue an updated draft • WG last call? draft-ietf-pwe3-mpls-eth-oam-iwk-02.txt

More Related