1 / 42

Cover

Cover ASTRO ® XTS TM 2500 Model II Digital Portable Radio Yuma Regional Communications System Your Radio 16-Position Select Knob 3-Position Concentric Switch Zone Select 10 : 46AM YPD PATROL Power On/Off Volume Control BATT ZONE PROG Top Button Emergency Control Top

ostinmannual
Télécharger la présentation

Cover

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Cover ASTRO® XTSTM 2500 Model II Digital Portable Radio Yuma Regional Communications System

  2. Your Radio 16-Position Select Knob 3-Position Concentric Switch • Zone Select 10 : 46AM YPD PATROL Power On/Off Volume Control BATT ZONE PROG Top Button Emergency Control Top Side Buttons Top Side Button: Cnv: Monitor Trk: Site Display Push-To-Talk (PTT) Button Side Button 1: Volume Set Menu Options Side Button 2 Cnv: Direct Trk: Keypad Lock Side Button 1 Options Call Alert Page (Respond) Call Alert Page (Send) Call Response Direct/TalkAround Display Light Dynamic Priority Emergency ID Number (View Your) – Call Button ID Number (View Your) – Page Button Monitor Nuisance Channel Delete Phone Call (Place) Phone Call (Respond) Private Conversation Call (Place) Private Conversation Call (Respond) Scan On or Off Site Lock Site View/Search Status/Message Calls Talkgroup Calls Volume Set Tone Side Button 2 Options Call Alert Page (Respond) Call Alert Page (Send) Call Response Direct/TalkAround Display Light Dynamic Priority Emergency ID Number (View Your) – Call Button ID Number (View Your) – Page Button Monitor Nuisance Channel Delete Phone Call (Place) Phone Call (Respond) Private Conversation Call (Place) Private Conversation Call (Respond) Scan On or Off Site Lock Site View/Search Status/Message Calls Talkgroup Calls Volume Set Tone Top Side Button Options Call Alert Page (Respond) Call Alert Page (Send) Call Response Direct/TalkAround Display Light Dynamic Priority Emergency ID Number (View Your) – Call Button ID Number (View Your) – Page Button Monitor Nuisance Channel Delete Phone Call (Place) Phone Call (Respond) Private Conversation Call (Place) Private Conversation Call (Respond) Scan On or Off Site Lock Site View/Search Status/Message Calls Talkgroup Calls Volume Set Tone Top Button Options Call Alert Page (Respond) Call Alert Page (Send) Call Response Direct/TalkAround Display Light Dynamic Priority Emergency ID Number (View Your) – Call Button ID Number (View Your) – Page Button Monitor Nuisance Channel Delete Phone Call (Place) Phone Call (Respond) Private Conversation Call (Place) Private Conversation Call (Respond) Scan On or Off Site Lock Site View/Search Status/Message Calls Talkgroup Calls Volume Set Tone

  3. Status Symbols – 1 of 2 Signal Strength Direct/ TalkAround Monitor Scan Battery Status View Program Secure Call Receive Continued on next slide.

  4. Status Symbols – 2 of 2

  5. Status Alert Tones

  6. LED Status • RED • Solid • - PTT is pressed; radio is transmitting • Flashing • - Channel Busy • - Low Battery (lights while transmitting) • GREEN • Solid • - Self-test being performed • Flashing • - Incoming Private Call GREEN LED RED LED

  7. Installation andRemoval Procedures Antenna Battery Belt Clip Universal Connector

  8. Antenna • To install the antenna: • Turn the radio off. • Screw the antenna (clockwise) into the antenna receptacle on top of the radio. • Tighten the antenna firmly with your fingers. • To remove the antenna: • Turn the radio off. • Unscrew the antenna (counter-clockwise) and remove it from the antenna receptacle on top of the radio.

  9. Charging the Battery The battery must be charged before use. Memory effect is a phenomenon that causes a loss in battery capacity or voltage due to repetitive shallow discharging or long-term overcharging. This memory effect has been greatly reduced in your batteries through the use of new cell technology. It is still recommended, however, that you discharge your battery as much as possible before recharging it. Recharging after each shift is good standard practice. When charging a battery that is attached to your radio, turn the radio off to ensure a full charge. Battery procedures continued on next panel.

  10. Battery • To install the battery: • Turn the radio off. • Align the three tabs at the bottom of the battery with the three slots at the bottom of the back of the radio. • Angle the battery forward toward the radio until the battery clicks into place. • To remove the battery: • Turn the radio off. • Holding the radio in one hand, push down on the battery release slides on both sides of the battery with the other hand. • Angle the battery away from the radio and remove.

  11. Universal Connector Cover • The universal connector cover protects the side • connector near the antenna. • To remove the cover: • Turn the radio off. • Carefully insert a flat-bladed screwdriver between the bottom of the cover and the connector. • Holding the top of the cover with your thumb, push the screwdriver gently downward and lever the cover away from the radio. • To install the cover: • Turn the radio off. • Insert the hooked end of the cover into the slot above the connector. • Rub the ball of your thumb from the top to the bottom of the cover, applying pressure towards the radio. This will flex the cover and snap it into place.

  12. Belt Clip • To install the belt clip: • Remove battery before installing or removing the belt clip. • Hold the battery with the back of the battery facing you. • Hold the belt clip with the top facing upward, and align the clip with the slots on the battery back. • Slide the belt clip downward into the slots until it clicks into place. • To remove the belt clip: • Pull away the metal tab at the top of the battery clip from the battery. • Slide the clip upward until it comes away from the radio. 1 2

  13. RF Adapter (RFA) • To install the RF adapter (RFA): • Turn the radio off. • Remove the antenna. • With your hand above the RFA, hold the RFA in the upright position using your thumb and finger and position it on the radio antenna bushing. • Turn the RFA collar and housing (together) clockwise to engage the collar with the threads on the outside of the radio antenna bushing. Turn it until it has rotated between one and two full turns. Watch the position of the collar and connector target to count the number of turns. If it becomes difficult to turn, DO NOT FORCE IT. • While maintaining downward pressure on the properly oriented switch housing, place the custom wrench all the way onto the RFA collar’s wrench flats. The wrench will be captured by the collar and will be unable to slip upward or downward. Turn the wrench in increments until the RFA is tightened very securely to the antenna bushing (10-14 turns).

  14. Public SafetySpeaker/Microphone Increase Volume Emergency Note: When mic is installed, volume and channel buttons are disabled on the radio. Must be contralled on the mic. Note: Side buttons on mic are same as the side buttons on the radio Decrease Volume Volume Set Cnv: Direct Trk: Keypad Lock

  15. Public SafetySpeaker/Microphone Installation (PSSM) – 1 of 3 • To install the PSSM: • Turn the radio off. • Follow the instructions for removing the universal connector cover. • Attach the accessory connector to the radio’s universal connector as follows: • a. Make sure the RF adapter has been installed in your radio before continuing with installation. • b. Looking at the antenna side of the radio, insert the bottom hooked end of the accessory connector into the slot below the universal connector. • c. While holding the accessory connector seated in the bottom slot, pivot the top of the accessory connector toward the radio until its RF interface connector aligns with the circular contact target on the RF adapter, then engage the accessory connector’s spring-loaded latch in the radio’s top slot. • Continued....

  16. Public SafetySpeaker/Microphone Installation (PSSM) – 2 of 3 • Attach the correct (frequency-sensitive) antenna to the PSSM by screwing the antenna’s threaded end into the threaded antenna jack on top of the PSSM’s housing. • Rotate the antenna clockwise into the jack until it seats firmly. • The public safety speaker/microphone performs best • when it is operated with the antenna above the user’s • shoulder. • To transmit using the public safety speaker/microphone, • press the PSSM’s PTT and speak into the microphone’s • grille area. The red light-emitting diode (LED) on top of the • radio will light, indicating that the radio is in the transmit • mode. • If a more permanent attachment is desired after the • accessory connector is latched to the radio, secure the • latch to the connector housing using the screw supplied.

  17. Public SafetySpeaker/Microphone Installation (PSSM) – 3 of 3 • To remove the PSSM: • Turn the radio off. • Rotate the antenna counter-clockwise to unscrew it from the jack. • Remove the accessory connector by pivoting the top of the accessory connector away from the radio until it disengages from the RF adapter. • Follow the instructions for attaching the universal connector cover.

  18. GENERAL FEATURES

  19. Radio On/Off/Volume To turn the radio on: Turn the On/Off/Volume Control knob clockwise. If the power-up test is successful, you briefly see SELF TEST, then the home display. If enabled, a power-up tone is also heard. If the power-up test is unsuccessful, you see ERROR XX/YY. (XX/YY is an alphanumeric code.) To turn the radio off: Turn the On/Off/Volume Control knob counter-clockwise until it clicks. On/Off/Volume Knob SELF TEST

  20. Channel/Mode Select(16-Position Select Knob) Channel/Mode Name • To select a channel/mode: • Rotate the 16-Position Channel/Mode Select knob to the desired position. • The new name will appear on the display. • If the channel/mode you selected is unprogrammed, • repeat the above step. Channel/Mode Knob YPD PATROL BATT ZONE PROG

  21. Time-out Timer • The time-out timer turns off your radio’s transmitter. • The timer is set for 60 seconds at the factory, but it • can be programmed from 0 to 7.75 minutes (465 • seconds) by a qualified radio technician. • Hold down the PTT button longer than the programmed time. • You will hear a low-pitched warning tone, the • transmission will cut off, and the LED will go out until you • release the PTT. • Release the PTT button. • The LED will re-light and the timer will reset. • Press the PTT button to re-transmit. The time-out timer restarts. • The timer will restart and the LED lights red. LED Push-to-Talk (PTT)

  22. Transmit and Receive • To transmit: • Select the desired zone/channel. • Listen for ongoing conversations; if the channel becomes clear, proceed with your call. • Press and hold the PTT button to transmit and wait for the “Talk Permit” tone. The LED will light red. When speaking, keep the microphone 1-2" from your mouth. • Note: If you do not hear a Talk Permit tone, your system • administrator has preprogrammed the tone to be off. • Release the PTT button to receive (listen). LED Push-to-Talk (PTT)

  23. 3-POSITION CONCENTRIC SWITCH

  24. Zone Select(3-Position Concentric Switch) • To select a zone: • Select zone A, B, or C using the 3-Position Zone Select switch. • If the zone you selected is unprogrammed, repeat step 1. • Press the Home button to confirm the displayed zone and channel. Zone Name Zone Select Switch YPD PATROL BATT ZONE PROG NOTE: This is a quick way to select the first three zones. Additional zones may be selected from the menu.

  25. TOP BUTTON

  26. Emergency – SendEmergency Call(Top Button) • To initiate an emergency: • 1. Press the Emergency button. A tone sounds and the display • Alternates EMERGENCY with the current zone/channel, the LED lights red, and you hear a group of short, medium-pitched tones. • 2. Mic will be open for 10 seconds, announce your emergency. After 10 seconds press the PTT button to continue your emergency traffic. • 3. After completing the emergency call, press and hold the emergency button for one second. • The alternating EMERGENCY display disappears, and the radio returns to normal operation. • NOTE: Emergency call will revert to the emergency channel. Mic will be open for 10 seconds. • NOTE: You must shut off emergency before changing modes or you will continue sending alarms. EMERGENCY BATT ZONE PROG LED Emergency

  27. TOP SIDE BUTTON

  28. Monitor (Conventional) (Top Side Button) • Your radio may be programmed to receive Private • Line(PL) calls. • To enable the monitor feature: • Select a conventional channel from the channel mapping list. • Momentarily press the Monitor button to listen for activity. • The monitor/carrier squelch indicator ( )is displayed. • Press and hold the Monitor button to set continuous monitor operation. • Press the Monitor button again, or the PTT button, to return to the original squelch setting. • Note: If you try to transmit on a receive-only channel, you • will hear an invalid tone until you release the PTT button. Monitor Button CONVENTIONAL Push-to-Talk (PTT)

  29. Site View/Search(Top Side Button) • You can view the number of the current site or force • your radio to change to a new one. • To view the current site: • Press the Site Search button. • The display momentarily shows the name of the current • site and its corresponding received signal strength • indicator (RSSI). • OR • If the radio is scanning for a new site, you momentarily see SCANING SITE displayed. • To change the current site: • Press and hold down the Site Search button. • You momentarily see SCANING SITE displayed and hear • a tone. When the radio finds a site, it returns to the home • display. Site Search Button SITE 2 BATT ZONE PROG

  30. SIDE BUTTON 1

  31. Volume Set Tone(Side Button 1) • To adjust the volume: • Select the desired zone and channel. • Press and hold the Volume Set button to hear the volume set tone. • Adjust the Volume Control knob if necessary. • Release the Volume Set button. On/Off/Volume Knob Volume Set Button

  32. SIDE BUTTON 2

  33. Direct/TalkAround(Side Button 2) • Also known as “talk-around operation,” direct lets • you bypass the repeater and connect directly to • another radio. The transmit and receive frequencies • are the same. • To directly connect with another radio: • Select a conventional channel from the channel mapping list provided by your system administrator. • Press the Direct button to enable this feature. • The direct symbol ( ) will be displayed. Make sure the • receiving unit has the same channel configuration • selected. You will not receive normal trunked, talkgroup • calls while in direct mode. • Press the Direct button again to disengage the feature and return to normal radio operation. • The direct symbol ( ) will no longer be displayed. CONVENTIONAL BATT ZONE PROG Direct Button

  34. Keypad Lock (Side Button 2) • To lock or unlock the radio keypad: • Press the Keypad Lock button to lock or unlock the radio keypad. • Note: The keypad lock only locks the keypad, not any • other button or switch. • Note: If an incoming call is received while the keypad is • locked, you must unlock the keypad in order to access the • call through the menu. Keypad Lock Button

  35. MENU

  36. Zone Select(Menu) • To select a zone: • Press the right side of the 4-way Navigation button • until ZONE appears on the display. • Press the button directly below ZONE. • The zone name flashes on the display. • Press the right side of the 4-way Navigation button to find the zone you want. • If the zone you selected is unprogrammed, repeat step 3. • Press the Home button to confirm the displayed zone and channel. • OR • Press the PTT button to transmit on the displayed zone/channel. Zone Name YPD PATROL BATT ZONE PROG Push-to-Talk (PTT)

  37. Smart Battery(Menu) • This feature allows you to view the condition of your • Smart Battery. • To access information about your battery: • Press the right side of the 4-way Navigation button until BATT is displayed. • Press the button directly below BATT. • Battery data is displayed as follows: • CAPACITY indicates the current charge on the battery. • INIT indicates the date of the initial use of the battery. • EST CHGS indicates the estimated number of charges on • the battery. • Note: If a Smart Battery is not powering your radio, the • display will read SMART BATT DATA NOT AVAILABLE. YPD PATROL BATT ZONE PROG

  38. Scan List Edit(Menu) – 1 of 3 This feature lets you change scan list members and priorities. To edit the scan list: 1. Press the button directly below PROG. 2, Press the button directly below SCAN. You see the first available item and the view/program ( ) symbol flashing, indicating the programming mode. You will also see SEL, DEL, and RCL displayed as possible selections. Continued on next slide. YPD PATROL BATT ZONE PROG

  39. Scan List Edit(Menu) – 2 of 3 • Press the button directly below SEL or DEL or RCL. • SEL = add the currently displayed item to the scan list. • DEL = delete the currently displayed item from the scan list. • RCL = view the next available item. • Note: You cannot delete a priority member. • Continued on next slide. YPD PATROL DEL SEL RCL

  40. Scan List Edit(Menu) – 3 of 3 • Press the left or right side of the 4-way Navigation button to select more zones to be added or deleted. • OR • Use the 16-Position Select knob to select additional channels to be added or deleted. • Note: The maximum number of members for a trunking • priority monitor scan list is 15; for a conventional scan list, • 15; and for a talkgroup scan list, 10. • Press the Home button to exit scan list programming and return to the home display. 16-Position Select Knob YPD PATROL

  41. Nuisance Delete(NUIS Menu) • When the radio scans to a channel that you do not • wish to hear (nuisance channel), you can temporarily • delete the channel from the scan list. • To delete a nuisance channel: • Press the right side of the 4-way Navigation button until NUIS is displayed. • Press the button directly below NUIS to temporarily delete the displayed channel from the scan list. • If desired, re-enable the channel by exiting and re-entering scan. • Note: Nuisance Delete cannot remove a priority channel • ( ) or the last channel in the list. YPD PATROL NUIS

  42. Thank You

More Related