1 / 9

Bruce Mayer, PE Licensed Electrical & Mechanical Engineer BMayer@ChabotCollege

Engineering 25. Tutorial: PolyFit 1 st ,2 nd , 3 rd , 4 th. Bruce Mayer, PE Licensed Electrical & Mechanical Engineer BMayer@ChabotCollege.edu. PolyFit for PolyMers. In ENGR45 you will learn that the production of PolyMers (Plastics) requires Chemical Reactions The polymer rcns maybe

pabla
Télécharger la présentation

Bruce Mayer, PE Licensed Electrical & Mechanical Engineer BMayer@ChabotCollege

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Engineering 25 Tutorial:PolyFit1st,2nd, 3rd, 4th Bruce Mayer, PE Licensed Electrical & Mechanical EngineerBMayer@ChabotCollege.edu

  2. PolyFit for PolyMers • In ENGR45 you will learn that the production of PolyMers (Plastics) requires Chemical Reactions • The polymer rcns maybe • Single ReAgent • Multiple ReAgent

  3. MultiReagent Reaction • The Curing Time, t, for a Batch of certain Polymer varies the amount of Reagent, R, as shown in the Data-Table (T-Table) Below • For this Data SetFind • 1st thru 4th degreepolynomials thatbest fit the data • Determine theall the polynomial’s goodness of fit byfinding J, S, and r2

  4. MultiReagent Reaction • Plot Each polynomialand the actual Dataon the Same Graph • Use the Low-r2polynomials to estimate the Amountof ReAgent that willMinimize the CuringTime

  5. The Plots • Use 2X2 SubPlot

  6. The Results The J values for polynomial degrees 1-4: 1.0e+05 * 2.1442 0.0676 0.0647 0.0621 The S value for this data set: 2.2477e+05 The r-sqd values for polynomial degrees 1-4: 0.0461 0.9699 0.9712 0.9724 The Best r-sqd value is for degree = 4 The amount of R (in kg) for minimum cure-time 4.8400 The minimum cure-time in seconds 897.5275

  7. The MATLAB File-1

  8. The MATLAB File-2

  9. Digital Data Table

More Related