1 / 25

Failure Mode and Effect Analysis ( FMEA) Power Boiler

Failure Mode and Effect Analysis ( FMEA) Power Boiler. Agenda. Introduction to FMEA. 1. Introduction to Power Boiler Causes of failures in boiler system. 2. 3. Case Study boiler pressure part. F ailure M ode and E ffects A nalysis (FMEA). DEFINITION.

pakuna
Télécharger la présentation

Failure Mode and Effect Analysis ( FMEA) Power Boiler

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Failure Mode and Effect Analysis (FMEA) Power Boiler

  2. Agenda Introduction to FMEA 1 Introduction to Power Boiler Causes of failures in boiler system 2 3 Case Study boiler pressure part

  3. Failure Mode and Effects Analysis (FMEA)

  4. DEFINITION • Potential Failure Mode– สภาพหรือรูปแบบความเสียหายของผลิตภัณฑ์ กระบวนการผลิต หรือแม้แต่การบริการ ที่ยังไม่เกิดขึ้น แต่คาดว่าจะเกิดขึ้นได้ในอนาคต • Potential Cause –สาเหตุที่เป็นไปได้ ที่ก่อให้เกิดสภาพหรือรูปแบบความเสียหายกับอุปกรณ์ • Effect – ผลลัพธ์ที่เกิดขึ้นเนื่องจากความเสียหาย และส่งผลโดยตรงต่อ ผลิตภัณฑ์ กระบวนการผลิต และ การบริการในที่สุด • Analysis – การวิเคราะห์อย่างเป็นระบบ ได้แก่ การวิเคราะห์การออกแบบ กระบวนการ การทำงานของผลิตภัณฑ์ และรวมไปถึงการวิเคราะห์ข้อมูลที่เกี่ยวข้องด้วย

  5. DEFINITION • Severity(SEV) – ค่าความรุนแรงของ Effect ในเชิงปริมาณ • Current Control – การควบคุมหรือการตรวจจับความเสียหายที่ดำเนินการอยู่ในปัจจุบัน • Detection (DET)– ค่าความสามารถในการตรวจจับความเสียหายที่เกิดขึ้นในเชิงปริมาณ • Recommended Action - วิธีการสำหรับป้องกันหรือลดความเสี่ยงในการเกิด Potential Cause

  6. DEFINITION • Risk Priority Number (RPN)–ค่าที่แสดงถึงความเสี่ยงของแต่ละ Potential Cause RPN = SEV x OCC x DET

  7. FMEA PROCESS • ค้นหาอุปกรณ์วิกฤต • รวบรวมข้อมูลต่างๆของอุปกรณ์ เช่น หน้าที่การทำงาน ประวัติความเสียหาย ประวัติการบำรุงรักษา • วิเคราะห์หา Failure Mode ที่เป็นไปได้ เช่น Leakage, Crack, Explosion, Deformation, Electrical Short เป็นต้น • วิเคราะห์หา Effectของแต่ละ Failure Mode เช่น การบาดเจ็บ, หยุดการเดินเครื่อง, ประสิทธิภาพลดลง เป็นต้น • กำหนด Severity (SEV)ของ Effect • วิเคราะห์หา Potential Cause ของแต่ละ Failure Mode

  8. FMEA PROCESS • กำหนด Occurrence (OCC) ของแต่ละ Potential Cause • ระบุ Current Control ของแต่ละ Potential Cause • กำหนดค่าความสามารถในการ Detection (DET) • คำนวณหาค่า Risk Priority Number (RPN) ของแต่ละ Failure Mode • หาวิธีการสำหรับป้องกันหรือลดความเสี่ยงในการเกิด Failure Mode ที่มีค่า RPN มากกว่า Criteria ที่กำหนด

  9. Equipment Function Potential Failure Modes Potential Failure Effects Severity Potential Cause(s) Occurence Predictive Methods Detection RPN Recommended Actions FMEA PROCESS

  10. FMEA PROCESS What is the Effect on the Outputs? What is the Input? How can this be found? What can be done? How Often? How bad? How Well? What can go wrong with the Input? What are the Causes?

  11. SEVERITY

  12. SEVERITY

  13. OCCURENCE

  14. OCCURENCE

  15. DETECTION

  16. RECOMMENDED ACTION คือ การกระทำ หรือ วิธีการใดๆ ที่ช่วยลดค่า Risk Priority Number ของ Potential Cause ซึ่งสามารถทำได้โดยการลด Severity, Occurrence, Detection อย่างใดอย่างหนึ่ง หรือ ทั้ง 3 อย่างพร้อมกัน

  17. Boiler pressure part

  18. Introduction to Power Boiler &Causes of failures in boiler system • Combine Cycle Power Plant • Thermal Power Plant Hoz. flow Ver. flow Sub. Cri Pressure Sup. Cri Pressure

  19. Causes of failures in boiler system

  20. Weld Defect

  21. Boiler tube Failure

  22. Case Study boiler pressure part • FAC • Thermal Fatigue • Erosion • Graphitization

  23. Conclusions

More Related