1 / 46

USER’S Manual

USER’S Manual. - Digital Video Recorder. CONTENTS. Chapter1. Introduction --------------------------------------------------------------------------------3 Chapter 2. Display Mode 2-1. Display screen functions ---------------------------------------------------------4

paloma-hall
Télécharger la présentation

USER’S Manual

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. USER’S Manual - Digital Video Recorder

  2. CONTENTS Chapter1. Introduction --------------------------------------------------------------------------------3 Chapter 2. Display Mode 2-1. Display screen functions ---------------------------------------------------------4 2-2. Operation -------------------------------------------------------------------------5-7 Chapter 3. Setup Mode 3-1. Overall --------------------------------------------------------------------------------8 3-2. System setup -----------------------------------------------------------------------9 3-3. Camera setup ---------------------------------------------------------------------10 3-4. Recording setup ------------------------------------------------------------------11 3-5. Sensor & Control setup ---------------------------------------------------------12 3-6. Motion & Color setup ------------------------------------------------------------13 3-7. Media setup ----------------------------------------------------------------------14 3-8. Audio setup ------------------------------------------------------------------------15 3-9. Network setup --------------------------------------------------------------------16 3-10. Password setup ----------------------------------------------------------------17 3-11. System Information -----------------------------------------------------------18 Chapter 4. Search Mode 4-1. Overall ------------------------------------------------------------------------------19 4-2. Search screen function ---------------------------------------------------------20 4-3. Index search and Screen Division Buttons --------------------------------21 4-4. Playback function ----------------------------------------------------------------22 4-5. Backup ------------------------------------------------------------------------------23 4-6. Watermark -------------------------------------------------------------------------24 4-7. Print and Refresh ---------------------------------------------------------------25 4-8. Log files ----------------------------------------------------------------------------26 4-9. Bookmark --------------------------------------------------------------------------27 Chapter 5. Forced Recording ---------------------------------------------------------------------28 Chapter 6. PTZ Camera control --------------------------------------------------------------29-30 Chapter 7. Snapshot and Snapshot Viewer ---------------------------------------------------31 Chapter 8. Alarm and Popup ----------------------------------------------------------------------32 Chapter 9. REMOTE SOFTWARE 9-1. Overall -------------------------------------------------------------------------------33 9-2. Web Browser ----------------------------------------------------------------------34 9-3. Remote site software 9-3-1. Installation ------------------------------------------------------------------35 9-3-2. Remote site Screen and Functions ----------------------------------36 9-3-3. Remote Site Setup -------------------------------------------------------37 9-3-3-1. System setup ---------------------------------------------------38 9-3-3-2. Main (Server) DVR address setup ------------------------39 9-3-3-3. Group (Monitoring Group) Setup --------------------------40 9-3-3-4. System Information -------------------------------------------41 9-3-4. Remote Site Search and Backup -------------------------------------42 Chapter 10. DvrPlayer 10-1. Installation -------------------------------------------------------------------------43 10-2. Detail descriptions of tool bar (Quick control) ----------------------------44 10-3. Detail descriptions of menu ---------------------------------------------------45 ------------------------------------------- User’s Manual NBCard V.3.0.3

  3. DVR/PC Chapter1. Introduction • Our DVR (Digital Video Recorder) is an advanced, total system solution that provides monitoring and recording the images from the video inputs like CCD cameras, C-TV, etc,. • The system is based on standard PC platform Windows 2000/XP(H.E). • To use our system : • 1) Install our DVR capture card in your system and connect cameras to the video • input of capture card. • 2) Install drivers of capture card. • 3) Install our DVR programs –DvrMainXPro(Home) V.XX.X.exe • - There are 2 versions in our DVR program • * Pro DVR Version : We recommend to use only in DVR system for professional • security. • * Home DVR Version : You can use DVR system for normal PC program for • home or SOHO user. • Our System is consisting of two major components : DvrMain and DvrRemote. • DvrMain : Consists video capture board and Main System Application. • This system is responsible for the monitoring and recording of the video event • from the cameras. • There are 2 versions in our DvrMain programs explained above. • DvrRemote : This is a Network Application program. • Thisapplication is for viewing video surveillance system’svideo event from • a remote PC through LAN or internet. ------------------------------------------- User’s Manual NBCard V.3.0.3

  4. 2-1. Display screen functions 10 1 2 3 4 7 5 9 8 6 Chapter 2. Display Mode Install related devices – Camera, Sensor, etc., - And double click DvrMain icon in the desktop screen. If you connect all camera correctly, monitoring screen appears as below. 1. Date and Time Indicator – Displays current date and time. 2. Function Panel– For Search, Setup, Forced recording, PTZ Control, Snapshot, Snapshot Viewer, Alarm OFF, POPUP 3. Picture control buttons : Control brightness, contrast, hue and saturation. 4. Sensor inbuttons(1-4/8/16) – Turns the button color yellow when connected sensor has been activated. If you press the activated button, turn the connected control device OFF. 5. Controlout indicator – Turns button color yellow and activate connected alarm device when an sensor has been activated 6. Camera Select andRecordingStatus Buttons – Single camera display select and indicating recording status. (Turns button color red and flicker) 7. Network state Indicator – Flickers means that someone is connected via network 8. Screen Division, Full Screen and Auto switching Buttons 9. Power button – You can choose power (System off) or Windows mode. You can set the ID/password and control level in option setting mode. 10. Display screen minimize button. (Only in home DVR version) ------------------------------------------- User’s Manual NBCard V.3.0.3

  5. 2-2. Operation Chapter 2. Display Mode Channel selection and Recording status -The number colored circle(1-16 or 1-8 or 1-4) located in the lower part of the screen indicates the camera number and recording status of the camera and channel selection. - Flicker thechannel number indicator means recording now. VIEW It is not necessary to use the screen division buttons located in the lower left corner of the screen to change the camera view. You can use the left and right mouse buttons to instantly view a single camera or remove the menu bars from the display. To change screen view : 1. Move the cursor to the desired camera view and double click with the left mouse button. A single view of the selected camera appears. Double click the left mouse button one more time to return the previous multiple screen view 2. To switch to full screen view(remove menu bars from the display), click the right mouse button on the screen. Click the right mouse button one more time to return the previous view. Sensor in and Control out Sensor in buttons(1-16 or 1-4. 1-8) Control out LED(1-4) Beefs (or alarms) and flickers when sensor is activated. If you want to cancel the beefs (or alarm), just click the number that flickering. Picture quality adjust Adjust the brightness, contrast, hue, and saturation by dragging the designated buttons. Select Default to reset them to default settings. ------------------------------------------- User’s Manual NBCard V.3.0.3

  6. Chapter 2. Display Mode Screen Division, Full screen and Auto switching buttons Quad display, cameras 1-4 ,5-8, 9-12, 13-16 at each click 9 cameras display, cameras 1-9, 10-16 at each click (in 8/16 channel model) Displays all 16 cameras(in 16 channel model) Full-screen display – Removes menu bars from display. Double click the right mouse button to return to previous screen display. Sequencing mode – Sequence using single, four, or nine camera displays. You can set switching time at the camera setup. - In 4Ch division 1 2 5 6 9 10 13 14 1 2 3 4 7 8 11 12 15 16 3 4 4A 4B 4C 4D 4A - In 9Ch division 1 2 3 8 9 10 1 2 3 4 5 6 11 12 13 4 5 6 7 8 9 14 15 16 7 8 9 9 A 9B 9A ------------------------------------------- User’s Manual NBCard V.3.0.3

  7. Search Snapshot Snapshot viewer Option setting Alarm ON/OFF (Camera) Forced recording POP-UP PTZ control Chapter 2. Display Mode Function Panel -You need ID and password to use search, Option setting and PTZ control. - Initial ID/password is guest/guest. ------------------------------------------- User’s Manual NBCard V.3.0.3

  8. 3-1. Overall guest XXXXX Chapter 3. Setup Mode To setup the this Digital Video Recorder, use the left mouse button and click on the option setting button located in the function panel. Option setting button This function is used when you need to setup a new environment for DVR, but users can not change setup at his disposal without password. - You need to set password in the setup mode. - Initial ID/password is guest/guest. If you type correct ID/password and click “OK” , setup mode screen shows as below. -If you do not set password, just click “ok” ------------------------------------------- User’s Manual NBCard V.3.0.3

  9. 3-2. System setup 1 2 4 3 7 6 5 8 9 10 Chapter 3. Setup Mode 1. Video Format : NTSC/PAL signal selection switch 2. Time Format : Type of display date/month/year selection switch 3. Rotation Interval : Set the rotation time between picture division 4. TV Out : Click and set the desired channels to display in the TV monitor by 1 channel rotationally and rotation interval. 5. Rebooting : Set the day and time system will reboot. - If you do not set this rebooting, system rebooting 1 time/week automatically. 6. Language : Select the language which you want. 7. Add Printer : You can set the printer. 8. Snapshot - If you want to use snapshot function, you must check Channel. -Channel : When you click Snapshot button, channel No. will printed in snapshot picture. -Comment : When you check Comment, channel name will printed in snapshot picture. -Display Mode : Check the channel which you want to capture the image. * If you do not check the Channel and display mode, snapshot does not work. 9. LogFile Setting : Check the item which you want to record the event in log file. 10. Move channel : You can exchange channel address by drag and drop method. - This function will help you that you need not to rearrange the camera connection installation for exchange channel number display in monitor. ------------------------------------------- User’s Manual NBCard V.3.0.3

  10. 3-3. Camera setup 1 2 3 4 5 6 Chapter 3. Setup Mode 1) Click the use box to enable a camera for setup. 2) Enter or Click the name, event recording, popup, sensor and ptz use if you want to use or setup each function. 1. use: Click the use box to enable a camera for use DVR recognize this check and check the camera work well or disconnect. -In case of 4/8 channel, the number appears from 1 to 4(8). 2. name : Enter the camera name (location, etc,.) in the name box 3. event recording : By storing the previous image when motion or sensor is detected, you can check before and after context of event. You can set the image of previousevent by frame numbers. (Max 5 frames) 4. popup : Check the channel you want to popup when motion or sensor detected. - Popup work only when you set as below 1) Check channels in camera setup 2) Set the motion area in motion/sensor setup 3) Motion, sensor, motion_sensor recording setting in recording setup 5. sensor : Enter the sensor number to trigger the camera 6. PTZ : Check the channel you connected PTZ camera. (Set pan and tilt protocol in the PTZ control panel of display screen.) ------------------------------------------- User’s Manual NBCard V.3.0.3

  11. 3-4. Recording setup 1 3 2 4 9 6 5 8 7 Chapter 3. Setup Mode 1. Channel select button to setup specific channel. -In case of 4/8 channel, the number appears from 1 to 4(8). 2.3. Recording method and schedule - You can set recording method by each pixel. 4. Schedule copy - After set one channel, you can set all channel same easily by schedule copy. 5. Holliday setting - If you set a day for holiday, that day work same as Sunday. 6. Frames per sec : Recording speed setting 7. Resolution : Picture resolution setting (320x240, 640x240, 640x480) 8. Compression quality : Selection of compression picture quality -Low (Low picture quality) : When recording scope is very wide range. -Middle(normal picture quality) : When recording scope is narrow. -High(High picture quality) : When recording use auto PAN/TILT/ZOOM function. -Super(Best picture quality) : Special use. 9. Camera OFF Alarm -You can set the alarm type when camera disconnected. ------------------------------------------- User’s Manual NBCard V.3.0.3

  12. 3-5. Sensor & Control setup 6 7 8 9 1 2 3 4 5 Chapter 3. Setup Mode Sensor Input 1. Use : Set the external sensor 1~16 you desire. Select the sensor up to the number of installed sensor. -In case of 4 channel, the number appears from 1 to 4. 2. Name : Enter the name of the sensor in the name box 3. NO, NC : Set the type of sensor 4. Duration(sec) : Select the keeping time of automatic “ON” state by the second that work after sensor is detected. 5. beep : Beeps when sensor is activated. 6. control : Enter the control output number that you want to connect and activate, when sensor is detected. Control Output 7. Use : Set the external control output 1~4. Select the sensor up to number of installed sensor. 8. Name : Enter the “machinery name” you desired to control . 9. Turn on time : Enter the beginning and ending time you desired to activate connected control device. ------------------------------------------- User’s Manual NBCard V.3.0.3

  13. 3-6. Motion & Color setup 1 3 4 5 2 6 7 8 Chapter 3. Setup Mode 1. Channel select button to setup motion & color -In case of 4/8 channel, the number appears from 1 to 4(8). 2.3. Motion area setting : To select a detection area, move the pointer to the desired area. Hold down the left mouse button and drag over the area. Release the left mouse button to end selection. A maximum of 10 detection areas can be set per camera. If you want to delete a area, simply drag the area to the out of the window. 4. Secret channel : If you check “use” in specific channel, checked channel display color pattern bar instead of camera image. But the camera image will recording. 5. alarm color : Line color selection when motion is detected in detection area, 6. sensitivity : Adjust the sensitivity of the detection areas. 7. beep : Beeps when motion is detected 8. Color brightness – Adjust the BRIGHTNESS of the viewed and recorded scene. contrast – Adjust the CONTRAST of the viewed and recorded scene. saturation – Adjust the SATURATION of the viewed and recorded scene. hue – Adjust the hue of the viewed and recorded scene. default – Return all level settings to their defaults. ------------------------------------------- User’s Manual NBCard V.3.0.3

  14. 3-7. Media setup 1 2 3 4 5 Chapter 3. Setup Mode After you install DVR program, you must to set up media to start recording. 1) Select recording drive in 2. 2) Click “Add” button to set the recording spaces. - Repeat same step to set another drives for recording drives (spaces) - Display the information of each added recording drive in window 1. * Pro version programmed that C: drive cannot record the images for system stability. 1. This window displaysthe information of HDD for the DVR recording space. If this window do not display drives, DVR can’t start recording. 2. It displays total space and free space for selected drive. 3. Add -It use to add drive to recording space for DVR. -If you select specific drive and click “Add”, selected drive display in window. Then selected drive use as recording space for DVR. 4. Delete - To use delete drive as not use recording space. 5. Refresh To use to know the new information of selected drive. ------------------------------------------- User’s Manual NBCard V.3.0.3

  15. 3-8. Audio setup 1CH 1CH 1 2 2 Chapter 3. Setup Mode 1. Audio no : Select the audio channel to recording designated camera number 2. sensitivity : Adjust the sensitivity of the audio 3. Play audio channel : Select the audio number to hear in multi channel display mode. ------------------------------------------- User’s Manual NBCard V.3.0.3

  16. 3-9. Networksetup 3 1 2 Chapter 3. Setup Mode 1. Service port Our Network program use 80 port in web, 3040 port in remote program 2. E-mail Setup E-mail function works only when SMTP server does not require ID and password. 3. DDNS (Dynamic Domain Name Service) If you use dynamic ip service, you must setup as below 1) Server : cqone.com 2) Port : 3030 3) Product ID : Use number attached in Program CD 4) User ID : Name as you want .(Ex : dvrshop) 5) Password : Type your password. 6) Confirm : Conform typed above in password. 7) E-mail : Type your e-mail address if you want to receive information. 8) Address : After setup above required information, you can connect your DVR in remote PC in Explorer as below. http://dvrshop.cqone.com ------------------------------------------- User’s Manual NBCard V.3.0.3

  17. 3-10. Password setup 2 1 1-1 1-2 1-4 1-3 1. Add User : To use to register, delete or modify the user. 1-1. Display users to permitted( registered user) 1-2. Authority level selection - A registrant authority assignment can set at . 1-3. Type user name, password and etc. 1-4. To use for add, delete, modify the user. 2. Permission : You can set a registrant authority level. 2 Chapter 3. Setup Mode - Initial ID/password is guest/guest ------------------------------------------- User’s Manual NBCard V.3.0.3

  18. 3-11. System Information Chapter 3. Setup Mode 1. System Information - It display system, DVR card and software information. 2. Tech. Support - If you have any trouble, use this contact point. ------------------------------------------- User’s Manual NBCard V.3.0.3

  19. 4-1. Overall SEARCH Chapter 4. Search Mode To search the this Digital Video Recorder, use the left mouse button and click on the SEARCH button located in the function panel. This function is used when you need to search the recording images of the DVR, but users can not search at his disposal without password. - You need to set password in the option setting mode. - Initial ID/password is guest/guest. If you type correct ID/password and click “OK” , search screen shows as below. ------------------------------------------- User’s Manual NBCard V.3.0.3

  20. 4-2. Search screen function 16 1 2 3 4 5 6 8 9 10 7 11 14 13 12 15 17 Chapter 4. Search Mode 1. Date and Time Indicator – Displays current date and time. 2. Index Search Buttons : Continuous, Motion, Sensor, Motion or Sensor recording search 3.4. Screen Division Buttons and 1 Camera select Buttons You can search 1, 4, 9 ,16 channel mode. 5. Playback Buttons 6. Play speed, Brightness and audio volume Buttons 7. Backup Button 8. Print Button – Print image. 9. Refresh Button – Refresh the recording images which recorded while you search. 10. Log file Button 11. Calendar window – Displays calendar with recording days highlighted. 12. Quick minute search Button 13. Quick time search bar 14. Recording status window RED : continuous recording BLUE : motion detection recording YELLOW : sensor input recording No Line : no recording status 15. Channel selection scroll 16. Book mark function 17. Exit - Exit to display mode ------------------------------------------- User’s Manual NBCard V.3.0.3

  21. 4-3. Index search and Screen Division Buttons <Normal screen playback> <Full screen playback> Chapter 4. Search Mode You can use index search for quick search by recording event (All, Motion, sensor). Click the button which type you want to search. Motion Motion or Sensor Sensor All Screen Division Buttons 9 division Full screen 4 division 16 division You can playback the recording images in any screen mode(1/4/9/16) but the playback speed is slower in multi screen division mode than 1 screen mode. If you want to playback in full screen, click button or click right mouse button on the screen. Tool bar disappears during the playback in the full screen mode. Tool bar appears automatically when you move the cursor on the screen to control the playback buttons. * Home version does not have full screen search function. ------------------------------------------- User’s Manual NBCard V.3.0.3

  22. 4-4. Playback function Stop Playback 1 Frame Advance 1 Frame Reverse Go to the first image recorded on HDD Go to the last image recorded on HDD Reverse Playback Play Speed control Buttons (From 0.5X to 10X) Frame Skip Buttons (play only I frames) Brightness – Adjust levels for recorded image. (Only one camera mode can be used) Audio Volume Button (Reserved) Chapter 4. Search Mode Play speed , Picture and audio volume Buttons ------------------------------------------- User’s Manual NBCard V.3.0.3

  23. 4-5. Backup 1 XXX 2 3 5 4 6 7 Chapter 4. Search Mode Click the backup button( ) in the search screen. - Backup image cannot be done when the viewing screen is divided. Before you click backup button, select desired 1 channel. 1. Select Still picture or Motion picture 2. Enter the file name. 3. Select the Star time and End time of backup images. 4. Select backup device. (CD-RW or other drives) - CD Format support only DirectCD type. 5. Select the option -Watermark 6. Click on the calculate size button.- It will take time to calculate the backup image size. -In case of FDD, file size must be under 1.4MB -In case of CD Disk, file size must be under CD disk size(usually under 750 MB) 7. Click OK to save. - Wait until the progress bar disappear. ------------------------------------------- User’s Manual NBCard V.3.0.3

  24. 4-6. Watermark Authentication failure! Open/Close File Play Pause Full Screen Save as.. 1 frame Advance Stop Chapter 4. Search Mode The Watermark tool allows you to verify if an original image has been altered. The Watermarking check is available by DvrPlayer. Watermarking operation 1. Start DvrPlayer. 2. Open backup file which you want to check. -The backup file must to check watermark in option when you backup it. 3. Click the option and check the authentication in DvrPlayer. 4. If backup file altered, altered frame lists show as below. • You can see the altered frame by detailed search in DvrPlayer. ------------------------------------------- User’s Manual NBCard V.3.0.3

  25. 4-7. Print and Refresh Printer button Refresh button Chapter 4. Search Mode Print (Images) /Refresh 1. Select one camera. - Printing an image cannot be done when the viewing screen is divided. 2. Click the PRINT button. The PRINT window appears as below. 3. Use Save, print, size control, close functions as your purpose. Refresh Recording data during the playback does not display in the recording status window. If you want to recording status after you start search, click the refresh button. ------------------------------------------- User’s Manual NBCard V.3.0.3

  26. 4-8. Log files LogFile button List by event List all Page Up/Down Exit Present Page Print Chapter 4. Search Mode If you want to see the DVR event logs, click log file button. Then below information will be listed. -Camera (disconnected/connected) - Control (activate) - Net (network connected) - PanTilt (control) - Sensor (activate) - System (ON/OFF) - Login (history) ------------------------------------------- User’s Manual NBCard V.3.0.3

  27. 4-9. Bookmark Add List High Normal Low 4 1 2 3 Chapter 4. Search Mode If you want to mark specific scenes during the playback (search), use bookmark function located on the top of search screen. Delete Go/Start -Add : Add to bookmark list -Delete : Delete selected event -List : List the bookmark -Go : Do to selected event If you click list( )button, below screen displays. 1. Displays event number in sequence. 2. Displays importance in three level (High, Normal, Low). - You can set the importance in the right side. 3. Displays the time where you bookmark. 4. Displays comment which you typed for reference. ------------------------------------------- User’s Manual NBCard V.3.0.3

  28. Chapter 5. Forced Recording Forced recording Button Forced recording function use when suspicious moving happens in the screen. If you click the forced recording button, DVR will record all channel continuous mode with full speed during 10 seconds. ------------------------------------------- User’s Manual NBCard V.3.0.3

  29. PTZ CONTROL Button 1. Click the button on the function panel, then below panel appears. -If you set the password at setup mode, you need to type ID and password. Camera number Camera direction control ZOOM Control FOCUS Control AUX1.2 Control Expanded functions door open/Close C:\Program Files\DVR\DvrMain\PTZ\daiwa_pm.ptc Light Camera Power Chapter 6. PTZ Camera control To operate pan/tilt/zoom functions on controllable systems do the following : 2. Select a camera number. 3. Use the buttons to pan left and right. 4. Use the buttons to tilt up and down. 5. If required use the FOCUS settings (+/-) to obtain the clearest picture. 6. Use the ZOOM settings (+/-) to zoom far/near. PTZ control setting Click setting which appear when rightmouse click on the PTZ panel, below camera setting window appears. Set to installed PTZ camera - Camera model protocol - Address/Speed, Data bit/Parity bit, Stop bit ------------------------------------------- User’s Manual NBCard V.3.0.3

  30. A type B type Chapter 6. PTZ Camera control Expanded functions door open status Depend on the installed PTZ camera, below control panel appears. ------------------------------------------- User’s Manual NBCard V.3.0.3

  31. Snapshot Button Snapshot Viewer Button Chapter 7. Snapshot and Snapshot Viewer If you press this button, images in the display screen will recorded still picture in the snapshot folder To see this still picture, use snapshot viewer button below. * To use snapshot function, you must set the below 2 setting in the system setting of option setting. -Check the channel and display mode in snapshot menu. To see recorded still picture with SNAPSHOT, click snapshot viewer button. Then select the specific image which you want . * Recorded images in snapshot folder (or directory) store only 7 days. Dvr system delete the images automatically for system efficiency after 7 days. 1. Selection of directory or folder 2. Selected image - Use save for backup, print or size control button as your purpose. ------------------------------------------- User’s Manual NBCard V.3.0.3

  32. Alarm ON/OFF button Popup button Chapter 8. Alarm and Popup ALARM If connected camera does not work, alarm or beefs sound occur. To off the alarm sound, use alarm on/off button. Alarm sound can select in system setting .(Default is beef sound) POPUP If you want to popup the screen in full screen when motion or sensor activated in specific channel, use popup function. You can choose the usage of popup and channels in the camera and recording setting. * Popup function operate only when - You check the popup usage channel in the camera setting. - Record program is motion or sensor recording mode in the recording setting. - In case of motion popup, you must set the motion area. ! IMPORTANT : Channel selection buttons and screen division buttons have priority to popup function. When you control manually channelselection buttons or screen division buttons, popup function stops automatically. ------------------------------------------- User’s Manual NBCard V.3.0.3

  33. 9-1. Overall Chapter 9. REMOTE SOFTWARE If the main DVR have connected with network (LAN, ADSL , Modem, etc,.), you can connect and perform monitoring, search without additional hardware from remote place. Our remote software use TCP/IP protocol in network program. There 2 ways to connect to main (server) DVR. 1) Web Brower : Web server function already included in main DVR program - Use 80 and 3040 port for port forwarding. 2) DvrRemote program : You need to install our remote program in your PC. Use 3040 port for port fording. 1-1. Network setting of main DVR - If you want to connect to main DVR in remote place, you need to network setting of main (Server) DVR. - You can setup network setting in window mode. 1-2. Support of Dynamic ip address - If you want to use dynamic ip, please setup DDNS Setup in page 36. - Use 3030 port for fort fording. ------------------------------------------- User’s Manual NBCard V.3.0.3

  34. 9-2. Web Browser Chapter 9. REMOTE SOFTWARE You can connect to main DVR by Web Browser (Internet Explorer). 1) Open the Internet Explorer. 2) Type the ip address or domain name of the main DVR which you want to connect in the address bar. 3) If you connect to main DVR for the first time in the remote PC, security warning will appear as below. Click Yes and wait to download the necessary programs from main DVR. 4) After download finished, network screen appears as below. Type the correct ID/Password registered in main DVR, then same images of the main DVR will display. - If you use port forwarding (IP sharer, etc,.), use port number. - If you do not use port forwarding, default port number is 3040. ------------------------------------------- User’s Manual NBCard V.3.0.3

  35. 9-3. Remote site software 9-3-1. Installation <Remote User Software Installation Process> Chapter 9. REMOTE SOFTWARE -Free remote site software is included with the this DVR to provide remote site viewing of live and backup images. The software is compatible with Windows 98SE/ME and Windows 2000/XP. -You can also connect multi remote viewing and backup in one remote site. To install the remote users software: 1) Start Windows 98SE/MEor Windows 2000/XP. 2) Close all programs, including any anti-virus programs. 3) Insert the CQONE CD into the CD-ROM drive. 4) The Windows Setup wizard starts. Follow the instructions that appear. 5) The software installation program appears. a. Install Microsoft Direct X 8.0 over. b. Install the Remote Client program (DvrRemote.exe) 6) Restart the computer. !IMPORTANT: Screen setup for the Remote User Software: – 24 or higher (recommend 32 bit) – Resolution 1024 x 768 ------------------------------------------- User’s Manual NBCard V.3.0.3

  36. 9-3. Remote site software 9-3-2. Remote site Screen and Functions 11 1 2 3 4 5 10 9 8 7 6 1. Date and Time Indicator – Displays current date and time. 2. Setting Button : Server address registration or monitoring group selection button 3. Surveillance Button : Network connect button 4. Search Button : Remote search or Backup Button 5. Remote PTZ Control door – Control pan, tilt, and zoom functions. 6. Audio buttons 7. 1 camera select buttons 8. Image enlarge/shrink buttons 9. Screen division select and screen rotation buttons 10. Power - Close the remote software. 11. X : Same as power off : Conceal the remote program (for another pc work) Door open>>> Chapter 9. REMOTE SOFTWARE If you click the DvrRemote.exe, remote site screen will appears as below. ------------------------------------------- User’s Manual NBCard V.3.0.3

  37. 9-3. Remote site software 9-3-3. Remote Site Setup : Remote site setup Button Chapter 9. REMOTE SOFTWARE You need to set up several information before you use remote site program. Ex) IP address of DVR which you want to connect to your remote site screen, etc - If you click this button, setup screen will appears as below. ------------------------------------------- User’s Manual NBCard V.3.0.3

  38. 9-3. Remote site software 9-3-3. Remote Site Setup 9-3-3-1. System setup 2 1 3 4 Chapter 9. REMOTE SOFTWARE 1. rotation interval : Select the time interval in second of the screen rotation. 2. date format : Select the display type of current date and time. 3. select language : Select the language which you want. 4. Audio : Select the audio play channel in multi channel remote monitoring. ------------------------------------------- User’s Manual NBCard V.3.0.3

  39. 9-3. Remote site software 9-3-3. Remote Site Setup 9-3-3-2. Main (Server) DVR address setup 3 1 2 4 Chapter 9. REMOTE SOFTWARE IF you want to connect server DVR in remote place, first you need to register the server DVR ip address or telephone number in this window 1. Type the necessary server information you want to connect in 1, and click add button in 2. Registered server DVR information will display in window 3.  You can register multi server DVR by repeat same steps. 2. Use add, delete, modify button to modify the server DVR information. 2. If you registered all server DVR address you want to connect, you must to click apply button in 4. 4. Click “Group” tab, and follow the next step explain in next page. 1) Main name : Server DVR name you want to connect. 2) ID/PW : ID/Password must to matched registered in server DVR. 3) IP : IP address or domain name of the server DVR 4) Port : It used in firewall system work. (If you do not use firewall, simply type 3040.) 5) TEL : Telephone number of server DVR ------------------------------------------- User’s Manual NBCard V.3.0.3

  40. 9-3. Remote site software 9-3-3. Remote Site Setup 9-3-3-3. Group (Monitoring Group) Setup 2 3 1 4 5 Chapter 9. REMOTE SOFTWARE After you registered server DVR information in “Main”, you need to register the monitoring group. - You can monitoring multi server DVR in one remote place. - You can connect 16 channels in one group and can make up to 100 groups. 1. Type the Group Name in 1 and click New Group in 4. Then group name will created in window in 2 which you typed. - You can create multi group name and you can register 16 channels in one group. 2. After you create the group name, you need to match the server DVR channels connect to remote group channel. - Remote channel : Channel number display in remote screen - Main name : Select Server DVR name which you registered in Main will display. - Main channel : Sever DVR channel number to display in remote screen defined in remote channel.  You need to repeat same steps in each channels. 1) Use buttons in 4 to modify the each setup. 2) After you setup all group, you must click apply button. ------------------------------------------- User’s Manual NBCard V.3.0.3

  41. 9-3. Remote site software 9-3-3. Remote Site Setup 9-3-3-4. System Information Chapter 9. REMOTE SOFTWARE It displays the information of your PC installed our network program. - Hardware and software information. ------------------------------------------- User’s Manual NBCard V.3.0.3

  42. 9-3. Remote site software 9-3-4. Remote Site Search and Backup : Remote site search and backup button 1 2 3 4 5 6 7 8 9 12 13 10 11 Chapter 9. REMOTE SOFTWARE If you click this button, remote search screen will appears as below. 1. Index Search Buttons : Continuous, Motion, Sensor, Motion&Sensor 2. Screen Division Buttons 3. One camera select Buttons 4. Image enlarge/shrink Buttons 5. Playback Buttons(Play, Reverse play, Frame advance etc,.) 6. Panorama Buttons : It help you to find exact scene you find. 7. -Speed control Button : 0.5X-10X -Skip Button : Play fast by skip the image -Brightness Button : Control the brightness of the image -Audio volume Buttons 8. Backup, Print, Refresh, Bookmark Buttons 9. Calendar Button – Displays calendar with recording days highlighted. 10. Quick minute search Button 11. Channel selection scroll 12. Recording status lines RED : continuous recording status. BLUE : motion detection recording status YELLOW : sensor input recording status No Line : no recording status 13. Exit Button : Exit to remote display mode ------------------------------------------- User’s Manual NBCard V.3.0.3

  43. 10-1. Installation DvrPlayer icon Camera Identification 02CH Parking Lot Recording time Indicator 07-18-2003 03:10:10:123 Play progress rate and progressive bar File name or Play speed rate Chapter 10. DvrPlayer The DvrPlayer Software is a video player that enable user search and playback the video data stored in various back-up devices. Windows Media Player is a compatible software to playback backup files, however, the DvrPlayer software features more detailed search and playback function. To install the DvrPlayer : 1. Close all programs, including any anti-virus programs of your PC. 2. Insert CD into the CD-ROM drive. 3. Install DvrPlayer.exe in your PC. After install the DvrPlayer, DvrPlayer icon created on desktop ofyour PC 4. Restart the computer. DvrPlayer images : ------------------------------------------- User’s Manual NBCard V.3.0.3

  44. 10-2. Detail descriptions of tool bar (Quick control) File open Saving present still image Play Frame advance : 1 frame advance at pause status Pause Stop : End the present playback file Full screen Chapter 10. DvrPlayer Tool bar ------------------------------------------- User’s Manual NBCard V.3.0.3

  45. 10-3. Detail descriptions of menu Chapter 10. DvrPlayer • File : Open/Close the files • -Open new file • -Close the present playback file • -Exit : Off the DvrPlayer • Play : Control the Play/Stop/Sound etc. • -Pause/Play( Hot key : P) • -Stop (Hotkey : S) • -Mute (Hotkey : M) • -1 Frame advance (Hotkey : Space bar) • Speed : Control the playback speed • -Increase (Hotkey : Right arrow) • -Decrease (Hotkey : Left arrow) • -Direct speed control : X1, X1/2, X1 • Window : Adjust the window size • -Half size (Hotkey : H) • -Double size (Hotkey : D) • -Full screen (Hotkey : F or Enter key) • -etc • Option : authentification (watermark) • Help : Display the DvrPlayer version ------------------------------------------- User’s Manual NBCard V.3.0.3

  46. MEMO : ------------------------------------------- User’s Manual NBCard V.3.0.3

More Related