1 / 11

Gianni Campion, Andrew H. Gosline, and Vincent Hayward

Initial Results using Eddy Current Brakes as Fast Turn-on, Programmable, Physical Dampers for Haptic Rendering. Gianni Campion, Andrew H. Gosline, and Vincent Hayward Haptics Laboratory, Center for Intelligent Machines McGill University Montréal, Québec, Canada

pandora-trevino
Télécharger la présentation

Gianni Campion, Andrew H. Gosline, and Vincent Hayward

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Initial Results using Eddy Current Brakes as Fast Turn-on, Programmable, Physical Dampers for Haptic Rendering Gianni Campion, Andrew H. Gosline, and Vincent Hayward Haptics Laboratory, Center for Intelligent Machines McGill University Montréal, Québec, Canada {champ,andrewg,hayward}@cim.mcgill.ca Haptics Laboratory

  2. Motivation • Physical damping is required for passivity [Colgate and Schenkel, 1994] • Sources of physical damping: • Dry Friction • Viscosity • Electromagnetic • Dissipation is accidental byproduct of design. • Difficult to model and not controllable. Haptics Laboratory

  3. Prior Work • Shunting a DC motor creates electrical damping.[Mehling and Colgate, 2005] • Frequency dependent, but not programmable, and limited to back EMF of DC motor. • Magnetorheological (MR) particle brakes are programmable • Nonlinear, slow to actuate, and suffer from hysteresis [An and Kwon, 2004], [Gogola and Goldfarb, 1999], [Arcy, 1996] Haptics Laboratory

  4. Proposal • Eddy current brakes are: • Controllable • Fast turn-on • Linear • Friction free • Inexpensive • Add eddy current brake to each driven joint • Create multi DOF hybrid device Haptics Laboratory

  5. Eddy Current Brakes • Move a conductor through a magnetic field, get dissipative resistance. • Currents generated according to the Lorentz Force Law. • Energy is dissipated by the Joule Effect. • Do not use contact. • Inductance/Vcc determines max update rate. Haptics Laboratory

  6. Eddy Current Brake Physics Induced current density: |J| = R|B| Power dissipated: Pd = 0.25D2dB2R22 Resistive torque: d= 0.25D2dB2R2 [Lee and Park, 1999] d D R Haptics Laboratory

  7. Prototype Haptic Device • Concentric aluminum blade added to each base joint of Pantograph. • Toroidal electromagnet cores machined from iron and wrapped with 24g enamel coated magnet wire. • Magnets driven in current mode by AMC 20A20 PWM servoamplifiers can achieve approx 500Hz on/off freq. Haptics Laboratory

  8. Rendering Results - Wall • Manipulandum thrust and held against virtual wall by elastic band . • Dampers on during wall penetration. • Limit cycles quenched or reduced. Haptics Laboratory

  9. Rendering Results - Friction • Friction model by Hayward and Armstrong, 2000, is prone to limit cycles in elastic stuck region. • Dampers used in stuck state. • Limit cycles quenched Haptics Laboratory

  10. Limitations • Damper blades add considerable inertia to the device. • Considerable power is required to generate damping torque. • Large ‘C’ shaped magnets flex and release under electromagnetic force, generating vibrations that are both audible and palpable. • Damping is not homogeneous through the workspace. Haptics Laboratory

  11. Conclusions • Physical damping from eddy current brakes can stabilize renderings of virtual walls and friction that were unstable without it. Future Work • Optimize design for both electromagnetic and dynamic performance • Verify linearity of damping • Further explore programmable damping in future control/passivity experiments Haptics Laboratory

More Related