1 / 28

CISCO ROUTER

CISCO ROUTER. BY Mark Sullivan Nancy Tung Xiao Yan Wu. Agenda. Cisco Background What is a Router What is Switch Router Command Router Configuration. Cisco Background. The worldwide leader in networking for the Internet.

paulos
Télécharger la présentation

CISCO ROUTER

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CISCO ROUTER BY Mark Sullivan Nancy Tung Xiao Yan Wu

  2. Agenda • Cisco Background • What is a Router • What is Switch • Router Command • Router Configuration

  3. Cisco Background • The worldwide leader in networking for the Internet. • Internet Protocol-based (IP) networking solutions • provides the broadest line of solutions for transporting data, voice and video

  4. Cisco Security • Cisco equipment ensure that networks both public and private • operate with maximum performance • flexibility security • VPN (Virtual Private Network) • Encryption

  5. Remote Office

  6. Router • A router is located at the gateway • it routes packets as they travel from one network to another network(s). • A router can be either a hardware device or a software application • The router is connected to at least two networks

  7. Cisco 4000

  8. Router Interfaces The console port is a management port used to provide out-of-band access to the router. It is used for the initial configuration of the router, monitoring, and disaster recovery procedures. To connect to the console port, a rollover cable and a RJ-45 to DB-9 adapter are used to connect a PC. Cisco supplies the necessary adapter to connect to the console port.

  9. Switches • segments the Local Area Network (LAN) • by directing the data flow and determines the route of packets • a switch performs the layer 2 or Data-Link layer function.

  10. Switch Interface

  11. Switch Port Connections

  12. Router Connection • To connect the PC to a router: • Configure terminal emulation software on the PC for: • The appropriate com port • 9600 baud • 8 data bits • No parity • 1 stop bit • No flow control • Connect the RJ-45 connector of the rollover cable to the router console port. • Connect the other end of the rollover cable to the RJ-45 to DB-9 adapter. • Attach the female DB-9 adapter to a PC.

  13. Connect the Console Cable • 1. Connect the light-blue console cable to the light-blue port labeled CONSOLE on the rear panel of the router. • 2. Connect the other end of the light-blue console cable to an RJ-45 adapter. •   Use either the RJ-45-to-DB-9 adapter or the RJ-45-to-DB-25 adapter, depending on your local terminal or PC. • 3. Attach the adapter to a serial port on a terminal or PC running emulation software to allow router configuration.

  14. Connect Ethernet

  15. Two Router Configuration Home Office Main Office

  16. Network Connections Office Home Office in Home Bedroom Connection Servers

  17. Router Basic Topology

  18. Network Configuration Modes

  19. Hostname Command Router#hostname HomeOffice HomeOffice(config)#

  20. Configuration Commands

  21. Interface Commands

  22. Interface Commands

  23. Router Protocol Command HomeOffice#router rip network ip address network ip address

  24. Summary Cisco Routers technology links many of the worlds communication networks. Cisco.com Cisco Academy http://cisco.netacad.net

  25. 2600 Router

  26. 6500 Switch

More Related