1 / 25

Outline

Outline. Definition Point-to-point network denial of service Smurf Distributed denial of service attacks Trin00, TFN, Stacheldraht, TFN2K TCP SYN Flooding and Detection. Denial of Service Attack Definition.

pia
Télécharger la présentation

Outline

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Outline • Definition • Point-to-point network denial of service • Smurf • Distributed denial of service attacks • Trin00, TFN, Stacheldraht, TFN2K • TCP SYN Flooding and Detection

  2. Denial of Service Attack Definition • An explicit attempt by attackers to prevent legitimate users of a service from using that service • Threat model – taxonomy from CERT • Consumption of network connectivity and/or bandwidth • Consumption of other resources, e.g. queue, CPU • Destruction or alternation of configuration information • Malformed packets confusing an application, cause it to freeze • Physical destruction or alternation of network components

  3. Status • DoS attacks increasing in frequency, severity and sophistication • 32% respondents detected DoS attacks (1999 CSI/FBI survey) • Yahoo, Amazon, eBay and MicroSoft DDoS attacked • About 4,000 attacks per week in 2000 • Internet's root DNS servers (9 out of 13) attacked on Oct 2002

  4. Two General Classes of Attacks • Flooding Attacks • Point-to-point attacks: TCP/UDP/ICMP flooding, Smurf attacks • Distributed attacks: hierarchical structures • Corruption Attacks • Application/service specific

  5. Smurf DoS Attack 1 ICMP Echo ReqSrc: Dos Target Dest: brdct addr 3 ICMP Echo ReplyDest: Dos Target • Send ping request to brdcst addr (ICMP Echo Req) • Lots of responses: • Every host on target network generates a ping reply (ICMP Echo Reply) to victim • Ping reply stream can overload victim gateway DoSTarget DoSSource Prevention: reject external packets to brdcst address.

  6. DDOS BadGuy Unidirectional commands Handler Handler Handler Coordinating communication Agent Agent Agent Agent Agent Agent Agent Agent Agent Agent Attack traffic Victim

  7. Attack using Trin00 • In August 1999, network of > 2,200 systems took University of Minnesota offline for 3 days • scan for known vulnerabilities, then attack with UDP traffic • once host compromised, script the installation of the DDoS master agents • According to the incident report • Took about 3 seconds to get root access • In 4 hours, set up > 2,200 agents

  8. Can you find source of attack? • Hard to find BadGuy • Originator of attack compromised the handlers • Originator not active when DDOS attack occurs • Can try to find agents • Source IP address in packets is not reliable • Need to examine traffic at many points, modify traffic, or modify routers

  9. Source Address Validity • Spoofed Source Address • random source addresses in attack packets • Subnet Spoofed Source Address- random address from address space assigned to the agent machine’s subnet • En Route Spoofed Source Address- address spoofed en route from agent machine to victim • Valid Source Address- used when attack strategy requires several request/reply exchanges between an agent and the victim machine- target specific applications or protocol features

  10. Attack Rate Dynamics Agent machine sends a stream of packets to the victim • Constant Rate- Attack packets generated at constant rate, usually as many as resources allow • Variable Rate • Delay or avoid detection and response • Increasing Rate- gradually increasing rate causes a slow exhaustion of the victim’s resources • Fluctuating Rate- occasionally relieving the effect- victim can experience periodic service disruptions

  11. Outline • Definition • Point-to-point network denial of service • Smurf • Distributed denial of service attacks • Trin00, TFN, Stacheldraht, TFN2K • TCP SYN Flooding and Detection

  12. SYN Flooding Attack • 90% of DoS attacks use TCP SYN floods • Streaming spoofed TCP SYNs • Takes advantage of three way handshake • Server start “half-open” connections • These build up… until queue is full and all additional requests are blocked

  13. full duplex data: bi-directional data flow in same connection MSS: maximum segment size connection-oriented: handshaking (exchange of control msgs) init’s sender, receiver state before data exchange flow controlled: sender will not overwhelm receiver point-to-point: one sender, one receiver reliable, in-order byte steam: no “message boundaries” pipelined: TCP congestion and flow control set window size send & receive buffers TCP: Overview RFCs: 793, 1122, 1323, 2018, 2581

  14. 32 bits source port # dest port # sequence number acknowledgement number head len not used Receive window U A P R S F checksum Urg data pnter Options (variable length) application data (variable length) TCP segment structure URG: urgent data (generally not used) counting by bytes of data (not segments!) ACK: ACK # valid PSH: push data now (generally not used) # bytes rcvr willing to accept RST, SYN, FIN: connection estab (setup, teardown commands) Internet checksum (as in UDP)

  15. Recall:TCP sender, receiver establish “connection” before exchanging data segments initialize TCP variables: seq. #s buffers, flow control info (e.g. RcvWindow) client: connection initiator server: contacted by client Three way handshake: Step 1:client host sends TCP SYN segment to server specifies initial seq # no data Step 2:server host receives SYN, replies with SYNACK segment server allocates buffers specifies server initial seq. # Step 3: client receives SYNACK, replies with ACK segment, which may contain data TCP Connection Management

  16. TCP Handshake C S SYNC Listening Store data SYNS, ACKC Wait ACKS Connected

  17. SYN Flooding C S SYNC1 Listening SYNC2 Store data SYNC3 SYNC4 SYNC5

  18. Step 1:client end system sends TCP FIN control segment to server Step 2:server receives FIN, replies with ACK. Closes connection, sends FIN. Step 3:client receives FIN, replies with ACK. Enters “timed wait” - will respond with ACK to received FINs Step 4:server, receives ACK. Connection closed. TCP Connection Management: Closing client server closing FIN ACK closing FIN ACK timed wait closed closed

  19. Flood Detection System on Router/Gateway • Can we maintain states for each connection flow? • Stateless, simple detection system on edge (leaf) routers desired • Placement: First/last mile leaf routers • First mile – detect large DoS attacker • Last mile – detect DDoS attacks that first mile would miss

  20. Detection Methods (I) • Utilize SYN-FIN pair behavior • OR SYNACK – FIN • Can be both on client or server side • However, RST violates SYN-FIN behavior • Passive RST: transmitted upon arrival of a packet at a closed port (usually by servers) • Active RST: initiated by the client to abort a TCP connection • So SYN-RSTactive pair is also normal

  21. SYN – FIN Behavior

  22. SYN – FIN Behavior • Generally every SYN has a FIN • We can’t tell if RST is active or passive • Consider 75% active

  23. Vulnerability of SYN-FIN Detection • Send out extra FIN or RST with different IP/port as SYN • Waste half of its bandwidth

  24. Detection Method II • SYN – SYN/ACK pair behavior • Hard to evade for the attacking source • Problems • Need to sniff both incoming and outgoing traffic • Only becomes obvious when really swamped

  25. False Positive Possibilities • Many new online users with long-lived TCP sessions • More SYNs coming in than FINs • A major server is down which would result in 3 SYNs to a FIN or SYN-ACK • Because clients would retransmit the SYN

More Related