1 / 24

Patapsco/Back River SWMM Model

Patapsco/Back River SWMM Model. Part II – SWMM Water Quality Calibration Maryland Department of the Environment. Water Quality Calibration. General Aggregate Five Subwatersheds Focus on predominant land uses Calibrate EOS loads to literature values

pilar
Télécharger la présentation

Patapsco/Back River SWMM Model

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Patapsco/Back River SWMM Model Part II – SWMM Water Quality Calibration Maryland Department of the Environment

  2. Water Quality Calibration • General • Aggregate Five Subwatersheds • Focus on predominant land uses • Calibrate EOS loads to literature values • Calibrate Event Mean Concentrations • Detailed • Time series overlay • Comparative Analysis

  3. Water Quality CalibrationUrban TSS and Metals • Objective • EMC (statistics of wet-weather events) • Unit Load (annual) • Parameters • Buildup Rate (Linear - Calibrated) • Build Limit (Set high) • Wash-off Coefficient (Based on Literature) • Wash-off Exponent (Based on Literature) • Calculation • Load =  (Flow*Conc.) • EMC = Load /  Flow • Results • Unique Solution of Buildup Rate • Validation • Timeseries Comparision

  4. Water Quality Calibration Non-Urban Land Use (USLE) • Calibration Objective • Correlate with long term loading rate estimates • USLE – Estimates gross long term erosion rate • Parameters (Land use specific) R=Rainfall Energy (from BWI) K=Soil Erodibility (Soil type) LS=Slope Length Gradient Ratio (DEM) C=Cropping Management Factor (Landuse – Calibrated) P=Erosion Control Practice (Literature) • Delivery Ratio • Applied Based on Subwatershed Drainage to Baltimore Harbor • Parameter • Adjusted cropping management factor within recommended values

  5. Event Mean Concentration References

  6. Unit Load References

  7. Water Quality Data *All data collected by Baltimore City -DNR Core station TSS data available at stations 240, 230 and 211 (Data set contains mostly base flow samples) - Metals values not shown from 2/25/95 to 12/1/96 due to high detection limits

  8. SWMM Baseflow Concentration References Base Flow Data Source TSS Cr Zn Pb Baltimore County NPDES Report (2000) X Baltimore City NPDES Report (2001) X Baltimore City Wastewater Facilities Master Plan (1997) X X X Baltimore County DEPRM Watershed Monitoring Project (1997-2000) X MDE Upper Western Shore Monitoring Project (2001) X Concentrations

  9. Results

  10. Jones Falls

  11. Patapsco

  12. Back River

  13. Best Management Practices (BMPs) • Uncertainty and variability in EMC • Instream sites from NPDES Report • Timeseries comparison of model vs data show reasonable concentration magnitude agreement • BMPs not explicitly included in model • Established a baseline load scenario

  14. Sub-Watershed Loads

  15. Baltimore Harbor Watershed Land Use Loading Summary CBP TSS Results (93-97) Urban: 44.5% Crop: 28.4% Pasture: 4.1% Forest: 23.1%

  16. Comparative Analysis - Existing Studies

  17. SWMM Calibration Summary & Conclusions • Focus on predominant land use for model calibration • Calibrate EOS loads to mean literature values • Calibration urban EMC’s to reported mean landuse values • Overlay model with water quality timeseries data • Comparative Analysis • Model supports overall trends (Flow, TSS and metals) • Next - Sensitivity of water quality model to NPS Loads

More Related