1 / 16

Outline of Draft Standard for 5 GHz

This draft standard outlines the parameters and modulation techniques for a 5 GHz OFDM system. It discusses the advantages of OFDM, sub-carrier allocation, base band modulation, channelization, header parameters, training symbols, encoder, and other functions.

postm
Télécharger la présentation

Outline of Draft Standard for 5 GHz

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Outline of Draft Standard for 5 GHz Hitoshi Takanashi, Masahiro Morikura, Richard van Nee Lucent + NTT Hitoshi, Masahiro, Richard Lucent+NTT

  2. Advantages of OFDM • Robust against delay spread • No feed back loop : stable • Any modulation schemes can be applied to the base band modulation. Same spectrum shape is found. • Fall back function is supported • Same PHY as BRAN’s would be possible Hitoshi, Masahiro, Richard Lucent+NTT

  3. Configuration of PHY Modulation in Base band Hitoshi, Masahiro, Richard Lucent+NTT

  4. OFDM Parameters • 48 sub-carriers in 12.5 MHz • Center carrier is not used • 64 points of FFT/IFFT • Base band modulation : • DPSK, DQPSK and 16QAM • 5 carriers in 100 MHz (15 MHz separation) Hitoshi, Masahiro, Richard Lucent+NTT

  5. Sub-carrier Allocation The center carrier interfered by the DC offset is not used. Hitoshi, Masahiro, Richard Lucent+NTT

  6. Base band Modulation • DBPSK and DQPSK • Differential coding for differential detection • DBPSK, r=1/2 : 5 Mbit/s • DQPSK, r=1/2 : 10 Mbit/s • DQPSK, r=3/4 : 15 Mbit/s • Pilot carriers (#3, 26 and 47) • 16 QAM • Pilot carriers (#3, 26 and 47) • r=1/2 : 20 Mbit/s • r=3/4 : 30 Mbit/s Hitoshi, Masahiro, Richard Lucent+NTT

  7. Channelization in L & M band • 10 carriers in 200 MHz band • Guard band : 13.875 MHz to the band edge • 15 MHz separation Hitoshi, Masahiro, Richard Lucent+NTT

  8. Channelization in Upper band • Same as lower / middle band Hitoshi, Masahiro, Richard Lucent+NTT

  9. Header Parameters • Long Guard Interval is secured Hitoshi, Masahiro, Richard Lucent+NTT

  10. Ts=T+TG Tprefix T Tpostfix  T Cyclic Extention • A raised cosine window to reduce out band power (roll off factor : 0.025) Hitoshi, Masahiro, Richard Lucent+NTT

  11. Training Symbols • Short and Long symbols Hitoshi, Masahiro, Richard Lucent+NTT

  12. Encoder • 64 states convolutional encoder • rate : 1/2 - 3/4 (punctured) Hitoshi, Masahiro, Richard Lucent+NTT

  13. Bit stealing/insertion Hitoshi, Masahiro, Richard Lucent+NTT

  14. Layer Reference Model • As used in the current MAC • New Primitive parameters are defined Hitoshi, Masahiro, Richard Lucent+NTT

  15. PLCP Frame Format Hitoshi, Masahiro, Richard Lucent+NTT

  16. Other Functions • Bit stuff to make the MPDU length multiples of an OFDM symbol. • Tail bits to set the convolutional encoder to a state. • Scrambler to minimize the data DC offset. • Interleave to enhance error correction function (within an OFDM symbol) Hitoshi, Masahiro, Richard Lucent+NTT

More Related