1 / 9

Mistakes To Avoid When Choosing Used Plastic Machinery In NJ

The process of buying used plastic machinery in NJ should be handled properly if you want to create efficient machining parts that will sell fast and bring in good profit. A good machine should make you more productive and assist in keeping prices low. <br>You should be able to create and sell more parts and make more money from the machine while at the same time establishing a reliable company. For the used plastic machinery to keep your costs low, it needs to have a low reject rate, quicker cycle times, use energy efficiently and get rid of spontaneous machine down time. <br>

Télécharger la présentation

Mistakes To Avoid When Choosing Used Plastic Machinery In NJ

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Mistakes To Avoid When Choosing Used Plastic Machinery In NJ http://www.premierplasticsnj.com

  2. Mistakes To Avoid When Choosing Used Plastic Machinery In NJ • The process of buying used plastic machinery in NJ should be handled properly if you want to create efficient machining parts that will sell fast and bring in good profit. A good machine should make you more productive and assist in keeping prices low. • You should be able to create and sell more parts and make more money from the machine while at the same time establishing a reliable company. For the used plastic machinery to keep your costs low, it needs to have a low reject rate, quicker cycle times, use energy efficiently and get rid of spontaneous machine down time. http://www.premierplasticsnj.com

  3. Mistakes To Avoid When Choosing Used Plastic Machinery In NJ • Choosing the right the used plastic machinery in NJ should not be a problem if you know what to look for and what to avoid. There are a number of mistakes that people make when buying this machinery that you will need to avoid by all means. • One of them is buying a machine that works poorly. If you want the used plastic machinery to be dependable, you need to make sure that it is has been completely checked and examined before you pay for it. http://www.premierplasticsnj.com

  4. Mistakes To Avoid When Choosing Used Plastic Machinery In NJ • If you buy a machine that has not been checked, you will undergo production loss due to multiple breakdowns. Another mistake that you should not make when buying the used plastic machinery NJ is choosing large screw diameters. • Sometimes, large screw diameters can cause poor quality problems as a result of material deprivation. The plastic material is going to take more time to be warmed by the barrel heaters when small shot sizes are used with screws that are very thick. http://www.premierplasticsnj.com

  5. Mistakes To Avoid When Choosing Used Plastic Machinery In NJ • If the shot size is undersized, material deprivation is also more probable to happen especially for materials that are heat sensitive. Another problem with large screw diameters is the big clipping forces that are produced when the screw is revolving. • This can cause the material to break down and lead to reject parts. You should also avoid using all-purpose screws with the used plastic machinery. While these screws can be used with most plastic materials such as nylon, PC, PE and PET, the component types as well as efficiency rates will be lesser as compared to the more superior screw designs. http://www.premierplasticsnj.com

  6. Mistakes To Avoid When Choosing Used Plastic Machinery In NJ • The best screw to use if you want to get the best results with your used machinery is the barrier screw. If you use the all-purpose screws, it should be for molding different types of materials, and not specific parts.  • Last not least, you will need to avoid choosing used plastic machinery in NJ that has controlled injection pressure. For you to be able to make quality parts constantly, you need to make sure that the molding technique is not restricted by the injection pressure. http://www.premierplasticsnj.com

  7. Mistakes To Avoid When Choosing Used Plastic Machinery In NJ • A good injection molding machine should have at least 10 percent pressure aside for it to automatically change to a normal variation depending on the thickness of the plastic material. • If you choose a machine that has less injection pressure, it will create moldings that are very short.  http://www.premierplasticsnj.com

  8. Mistakes To Avoid When Choosing Used Plastic Machinery In NJ • To help you choose the right the used plastic machinery in NJ, visit my website today for more related information. http://www.premierplasticsnj.com

  9. http://www.premierplasticsnj.com Mistakes To Avoid When Choosing Used Plastic Machinery In NJ

More Related