1 / 55

Chapter 14 The Behavior of Gases

14.1 Properties of Gases. OBJECTIVES:Explain why gases are easier to compress than solids or liquids areDescribe the three factors that affect gas pressure. Compressibility. Gases can expand to fill its container, unlike solids or liquidsThe reverse is also true:They are easily compressed, or sq

quana
Télécharger la présentation

Chapter 14 The Behavior of Gases

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


    1. Chapter 14 The Behavior of Gases

    2. 14.1 Properties of Gases OBJECTIVES: Explain why gases are easier to compress than solids or liquids are Describe the three factors that affect gas pressure

    3. Compressibility Gases can expand to fill its container, unlike solids or liquids The reverse is also true: They are easily compressed, or squeezed into a smaller volume Compressibility is a measure of how much the volume of matter decreases under pressure

    4. Compressibility This is the idea behind placing air bags in automobiles In an accident, the air compresses more than the steering wheel or dash when you strike it The impact forces gas particles closer together, which is possible because there is a lot of empty space between them

    5. Compressibility At 25oC, the distance between particles is about 10x the diameter of the particle Fig. 14.2 Shows spacing between O2 and N2 molecules in air This empty space makes gases good insulators down & fur keep animals warm because the air trapped in them prevents heat from escaping the animals body) How does the volume of the particles in a gas compare to the overall volume of the gas (kinetic theory)?

    6. Variables that describe a Gas The four variables and their common units: 1. pressure (P) in kilopascals 2. volume (V) in Liters 3. temperature (T) in Kelvin 4. amount (n) in moles The amount of gas, volume, and temperature are factors that affect gas pressure.

    7. 1. Amount of Gas When we inflate a balloon, we are adding gas molecules. Increasing the number of gas particles increases the number of collisions thus, pressure increases If temperature is constant, then doubling the number of particles doubles the pressure

    8. Pressure and the number of molecules are directly related More molecules means more collisions, and Fewer molecules means fewer collisions. Gases naturally move from areas of high pressure to low pressure, because there is empty space to move into

    9. Using Gas Pressure A practical application is aerosol (spray) cans gas moves from higher pressure to lower pressure a propellant forces the product out whipped cream, hair spray, paint Fig. 14.5, page 416 Is the can really ever empty?

    10. 2. Volume of Gas In a smaller container, the molecules have less room to move. The particles hit the sides of the container more often. As volume decreases, pressure increases. (syringe example) Thus, volume and pressure are inversely related to each other

    11. 3. Temperature of Gas Raising the temperature of a gas increases the pressure, if the volume is held constant. (T and P are directly related) The faster moving molecules hit the walls harder, and more frequently! Should you throw an aerosol can into a fire? When should your automobile tire pressure be checked?

    12. 14.2 The Gas Laws OBJECTIVES: Describe the relationships among the temperature, pressure, and volume of a gas Use the combined gas law to solve problems

    13. The Gas Laws are mathematical The gas laws will describe HOW gases behave. Gas behavior can be predicted by the theory. The amount of change can be calculated with mathematical equations. You need to know both of these: the theory, and the math

    14. Robert Boyle (1627-1691)

    15. #1. Boyles Law - 1662

    17. Jacques Charles (1746-1823) French Physicist Part of a scientific balloon flight in 1783 one of three passengers in the second balloon ascension that carried humans This is how his interest in gases started It was a hydrogen filled balloon good thing they were careful!

    18. #2. Charles Law - 1787 For a fixed mass (moles), gas volume is directly proportional to the Kelvin temperature, when pressure is constant. This extrapolates to zero volume at a temperature of zero Kelvin. Charles Law Animation

    19. Converting Celsius to Kelvin

    21. Practice Problems 9-10 If a sample of gas occupies 6.80 L at 325oC, what will its volume be at 25oC if the pressure does not change? Exactly 5.00 L of air at 50.0oC is warmed to 100.0oC. What is the new volume if the pressure remains constant?

    22. Joseph Louis Gay-Lussac (1778 1850)

    23. #3. Gay-Lussacs Law - 1802

    24. Practice Problems 11-12 A sample of nitrogen gas has a pressure of 6.58 kPa at 539 K. If the volume does not change, what will the pressure be at 211 K? The pressure in a car tire is 198 kPa at 27oC. After a long drive, the pressure is 225 kPa. What is the temperature of the air in the tire (assume the volume is constant).

    25. #4. The Combined Gas Law

    26. Practice Problems 13-14 A gas at 155 kPa and 25oC has an initial volume of 1.00 L. The pressure of the gas increases to 605 kPa as the temperature is raised to 125oC. What is the new volume? A 5.00 L air sample has a pressure of 107 kPa at 50oC. If the temperature is raised to 102oC and the volume expands to 7.00 L, what will the new pressure be?

    27. The combined gas law contains all the other gas laws! If the temperature remains constant...

    28. The combined gas law contains all the other gas laws! If the pressure remains constant...

    30. 14.3 Ideal Gases OBJECTIVES: Compute the value of an unknown using the ideal gas law Compare and contrast real an ideal gases

    31. 5. The Ideal Gas Law #1 Equation: P x V = n x R x T Pressure times Volume equals the number of moles (n) times the Ideal Gas Constant (R) times the Temperature in Kelvin. R = 8.31 (L x kPa) / (mol x K) The other units must match the value of the constant, in order to cancel out. The value of R could change, if other units of measurement are used for the other values (namely pressure changes)

    32. Units and the Ideal Gas Law R = 8.31 LkPa/Kmol (when P in kPa) R = 0.0821 Latm/Kmol (when P in atm) R = 62.4 LmmHg/Kmol (when P in mmHg) Temperature always in Kelvins!!

    33. We now have a new way to count moles (the amount of matter), by measuring T, P, and V. We arent restricted to only STP conditions: P x V R x T The Ideal Gas Law

    34. Practice Problems A rigid container holds 685 L of He(g). At a temperature of 621 K, the pressure of the gas is 1.89 x 103 kPa. How many grams of gas does the container hold? A childs lungs hold 2.20 L. How many moles of air (mostly N2 and O2) do the lungs hold at 37oC and a pressure of 102 kPa.

    35. Ideal Gases We are going to assume the gases behave ideally- in other words, they obey the Gas Laws under all conditions of temperature and pressure Ideal gases do not really exist, but it makes the math easier and is a very close approximation. Particles have no volume? Wrong! No attractive forces? Wrong!

    36. Ideal Gases There are no gases that are absolutely ideal however Real gases do behave ideally at high temperature, and low pressure Because under these conditions, the gas particles themselves are so far apart they take up a very small proportion of the gass volume and the IM forces are so weak that they can be ignored

    37. Ideal Gas Law: Useful Variations PV = nRT Replace n with mass/molar mass P x V = m x R x T M m = mass, in grams M = molar mass, in g/mol Rearrange equation 1 Molar mass = M = m R T P V

    38. Using Density in Gas Calculations Density is mass divided by volume m V so, we can use a density value to give us two values needed in PV = nRT Volume (usually 1 L) and n, if we know the molar mass, because we can calculate it grams (from D) x 1 mole grams

    39. Using Density in Gas Calculations What is the pressure of a sample of CO2 at 25oC, with a density of 2.0 g/L? PV = nRT ? P = V = 1 L, R = 8.31 LkPa/molK n = 2.0 g x 1 mole/44.0 g = 0.045 mole P = 0.045 mole x 8.31 x 298 K = 113 kPa 1 L

    41. Ideal Gases dont exist, because: Molecules do take up space There are attractive forces between particles - otherwise there would be no liquids

    42. Real Gases behave like Ideal Gases... When the molecules are far apart. The molecules take up a very small percentage of the space We can ignore the particle volume. True at low pressures and/or high temperatures

    43. Real Gases behave like Ideal Gases When molecules are moving fast = high temperature Collisions are harder and faster. Molecules are not next to each other very long. Attractive forces cant play a role.

    44. Real Gases do NOT Behave Ideally When temperature is very low Because the low KE means particles may interact with one another for longer periods of time, allowing weaker IM forces to have an effect When the pressure are high Because the particles are smashed together more closely and thus occupy a much greater percentage of the volume

    45. 14.4 Gas Mixtures & Movements OBJECTIVES: Relate the total pressure of a mixture of gases to the partial pressures of its component gases Explain how the molar mass of a gas affects the rate at which it diffuses and effuses

    46. #7 Daltons Law of Partial Pressures For a mixture of gases in a container, PTotal = P1 + P2 + P3 + . . .

    47. Collecting a Gas over Water A common lab technique for collecting and measuring a gas produced by a chemical reaction The bottle is filled with water and inverted in a pan of water As the gas is produced in a separate container, tubing is used to carry it to the bottle where it displaces the water in the bottle When the level of the gas in the bottle is even with the water in the pan, the pressure in the bottle = atmospheric pressure A graduated cylinder is often used to collect the gas (for ease of measuring the gas volume)

    48. Daltons Law of Partial Pressures If the gas in containers 1, 2 & 3 are all put into the fourth, the pressure in container 4 = the sum of the pressures in the first 3

    49. Practice Problems Determine the total pressure of a gas mixture containing oxygen, nitrogen and helium: PO2 = 20.0 kPa, PN2 = 46.7 kPa, PHe = 20.0 kPa. A gas mixture containing oxygen, nitrogen and carbon dioxide has a total pressure of 32.9 kPa. If PO2 = 6.6 kPa and PN2 = 23.0 kPa, what is the PCO2 ?

    50. Diffusion and Effusion Effusion = gas particles escaping through a tiny hole in a container Both diffusion and effusion depend on the molar mass of the particle, which determines the speed at a given temperature (= average KE)

    52. Effusion: a gas escapes through a tiny hole in its container - balloons slowly lose air over time

    53. 8. Grahams Law The rate of effusion and diffusion is inversely proportional to the square root of the molar masses (M) of the gases. Relationship based on: KE = mv2 At a given temperature (avg KE) larger molecules will have lower velocities

    54. Grahams Law Explained Temperature is a measure of the average KE of the particles in a sample of matter At a given temperature (say 25oC), the molecules of a lighter gas will be moving faster than molecules of a heavier one, so Faster-moving particles spread out faster!

    55. Sample: compare rates of effusion of Helium (He) with Nitrogen (N2) p. 436 With effusion and diffusion, the type of particle is important: Gases of lower molar mass diffuse and effuse faster than gases of higher molar mass. Helium effuses and diffuses 2.7 times faster than nitrogen thus, helium escapes from a balloon quicker than air, which is ~79% N2! Grahams Law

More Related