1 / 8

Piping System and Steam Generation & Distribution System Audit In India

We are service manufacturing and service providers, Piping System audit service and Steam Generation & Distribution system audit.

ranipatil22
Télécharger la présentation

Piping System and Steam Generation & Distribution System Audit In India

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Piping System and Steam Generation & Distribution System Audit In India

  2. Piping System Audit: A piping system is an assembly of a component of a system. Pipes prepared by forging then boring to the desired thickness. A typical analysis requires a week or less of time on the site and includes the following procedures: 1. Analyze the supply equipment. 2. Measure storage capacity 3. Qualify the demand for air 4. Solve production problems 5. Create system diagrams 6. Determine operating costs 7. Develop an action plan

  3. We are service manufacturing and service providers, Piping System audit service, copywriting department, isolation service and air demand analysis. The products and services provided are approved in quality.

  4. We are the leading distributor of automatic drain Valve, Aluminum piping, Clipped piping System, PEX piping system, PPRC pipes, pressure vessels, compressed air leak management system, compressed air energy monitoring system, pure water accessories and plastic pipe fitting. • The cost of energy is one of the main contributors. Therefore, reducing the consumption of electrical energy, thermal or in any other form always helps in business sustenance and growth. Moreover, because of fossil fuel energy, any reduction in energy consumption would also mean conservation of natural resources and, most importantly, less impact on the environment.

  5. Steam Generation & Distribution systemis one of the main forms of energy used in industries such as refineries, pulp, and paper, the metallurgical industry, fertilizers, petrochemicals, thermal power plants, etc. Therefore, the vapor audit is the most important vapor consumption.

  6. Steam Generation: • Assessment of the performance of steam generators. • The efficiency of the boilers was evaluated by the indirect method. • The SF ratio has been calculated for boilers • The effectiveness of HRSG was evaluated by the direct method • Efficiency compared to design values • Overall steam balance for the refinery with detailed steam production and steam consumption per unit for HP, MP, and LP. This also includes condensate recovery. • Steam consumption of equipment (actual) was compared to w.r.t. Equipment Steam Requirement (Design)

  7. Steam distribution system: a) The length of the main steam distribution manifold throughout the refinery was approximately 19 km b) The refinery lines were inspected for the zones As a result, appropriate suggestions were made.

  8. Study of steam leaks and steam traps: • Location of steam leaks, nature and amount of steam. • Steam losses were quantified by measuring plume length during dry and rainy seasons. • Total vapor loss of two at the steam leak in refinery ~ 100 TPD. • About 7000 steam traps were categorized as OK, defective, defective, out of order and missing. • The recommended test intervals for steam traps have been indicated. • Recommendations to reduce the escape of steam have been provided.

More Related