1 / 18

可摘局部义齿

可摘局部义齿. 魏 斌. review. 可摘局部义齿的支持方式 : 3 类 可摘局部义齿的组成 : 区分直接固位体与间接固位体 间接固位体的作用 最常见的直接固位体 ------- 卡环 : 组成. 本课重点二. 直接固位体 ------- 卡环. 卡环与观测线的关系 P192. 2 . Surveying line; Guide line. (1) 模型观测器 (surveyor) (2) 观测线 定义 与基牙外形高点线的区别 (3) 观测线的类型. 3 .观测线类型与卡环的选择. 就位道. 非倒凹区. 倒凹区. 卡环与观测线的关系.

razi
Télécharger la présentation

可摘局部义齿

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 可摘局部义齿 魏 斌

  2. review 可摘局部义齿的支持方式: 3类 可摘局部义齿的组成: 区分直接固位体与间接固位体 间接固位体的作用 最常见的直接固位体-------卡环: 组成

  3. 本课重点二 直接固位体-------卡环 卡环与观测线的关系 P192

  4. 2.Surveying line; Guide line (1)模型观测器(surveyor) (2)观测线 • 定义 • 与基牙外形高点线的区别 (3)观测线的类型

  5. 3.观测线类型与卡环的选择 就位道 非倒凹区 倒凹区

  6. 卡环与观测线的关系 I类观测线 II类观测线 III类观测线 I型卡环 II型卡环 III型卡环

  7. 4.卡环的材料要求---自学 倒凹深度

  8. 5.卡环的种类 • 根据制作方法分 (1)铸造卡环(casting clasp) 圆环形卡环(circumferentia clasp) 杆形卡环(bar clasp) (2)锻丝卡环(wrought wire clasp)

  9. 根据卡臂数目分 单臂卡环(one arm clasp) 双臂卡环(two arms clasp) 三臂卡环(three arms clasp) • 卡环和观测线的关系分 I、II、III型卡

  10. 常用的铸造卡环: (1)圈形卡环(ring clasp) (2)回力卡环(back action clasp) (3)对半卡环(half and half clasp) (4)联合卡环(combined clasp) (5)延伸卡环(extension clasp)

  11. 自学 (6)连续卡环(continuous clasp) (7)倒沟卡环(reverse hook clasp) (8)尖牙卡环(cuspid clasp) (9)杆形卡环(bar clasp)

  12. 常用的缎丝卡环 • 特点 • 种类 • one arm clasp • two arms clasp • three arms clasp • ring clasp • continuous clasp

  13. 6.卡环的组合应用 (1) 混合型卡环

  14. 本课重点二 (2)RPI(rest, guiding plate, I bar)卡环组 近中支托 邻面板 常用于远中游离端义齿 I杆

  15. RPI卡环组的优点: • 基牙保护 • 利于龈组织健康 • 美观 • 抵抗侧向力 注意点

  16. (3)RPA(rest guiding plate Aker clasp)卡环组 • 近中支托 • 远中邻面板 • 圆环形卡环固位臂

  17. 预习下节课 • 什么是肯氏分类,具体怎样分类? • 可摘局部义齿修复后应达到的基本要求.

More Related