1 / 8

RFI Assessment at Pole

RFI Assessment at Pole. S. Barwick, UCI ANITA meeting, UCI. RFI Assessment Team. UH: Peter Gorham, Marc Rosen, Gary Varner, … UCI: Steve Barwick, Jiwoo Nam UCB: Kurt Woschnagg(?) KU : Dave Besson. Goals. Design and gain familiarity of prototype antenna system

read
Télécharger la présentation

RFI Assessment at Pole

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. RFI Assessment at Pole S. Barwick, UCI ANITA meeting, UCI

  2. RFI Assessment Team • UH: Peter Gorham, Marc Rosen, Gary Varner, … • UCI: Steve Barwick, Jiwoo Nam • UCB: Kurt Woschnagg(?) • KU : Dave Besson

  3. Goals • Design and gain familiarity of prototype antenna system • Test equipment in cold environment, evaluate robustness, ease of use, problems • Measure RFI with T=300K amps in relevant bandwidth • Measure ice attenuation with RICE transmitters

  4. Equipment (U.H) Antenna (0.2 - 1 GHz) Tripod Amplifiers (~300K)

  5. DAQ (UH) Antenna Laptop (windows and linux) Low noise amplifiers Aquiris with 2GSa/s TWR Tertiary Amp

  6. Plan: preliminary • Handcarry equipment to pole in Jan 03 • Pole Personnel: S. Barwick, Jiwoo Nam, Kurt Woschnagg(?), D.Besson(?) • Get snowmobile or Sprite, drive few km from pole (ski hut?) • Auto trigger (forced trigger by user) • Point toward and away from dome • Point toward and away from MAPO • Point up, down and toward the sun • Save 5-10 waveforms, both polarizations • Transient Impulsive trigger (between 5-10 sigma) • Similar tests as forced trigger • Save ~100 waveforms of 200kSa

  7. Plan (continued) • Attenuation studies with RICE transmitter • D. Besson: Check out and set up at pole and leave instructions for operation(?) • Start above RICE and move equipment • look for Total Internal Reflection[TIR] & surface wave • Try to measure attenuation (vs frequency?) [>300MHz, higher the better since losses are larger] • Low priority: Not likely this season, but worth thinking about for future. • Leave spare antenna and Lecroy scope connected to internet, run in coincidence with RICE. Place antenna looking down at 45 deg from location near dome, or maybe SPASE shack. • Prototype of ANITA+RICE?

  8. ANITA + AMANDA-II/RICE ANITA 1.5km 1.4km ne 1.9 km

More Related