1 / 23

An Opening in the Abdomen An Opening in the Market: Hernia Tensiometer

An Opening in the Abdomen An Opening in the Market: Hernia Tensiometer. GROUP 2: Martha Ingram Megan Johnston Chelsea Samson. What Is a Hernia?. Laparoscopic. Open. Device Must:. Measure tension resisting closure at the suture line after: - dissection of the injury area

rendor
Télécharger la présentation

An Opening in the Abdomen An Opening in the Market: Hernia Tensiometer

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. An Opening in the Abdomen An Opening in the Market: Hernia Tensiometer GROUP 2: Martha Ingram Megan Johnston Chelsea Samson

  2. What Is a Hernia?

  3. Laparoscopic Open

  4. Device Must: • Measure tension resisting closure at the suture line after: • - dissection of the injury area • - separating fascia from muscle • placing the mesh • Isolate abdominal tissue • Bring edges together • Read tension at center of hernia

  5. Timeline - Done • Met with advisors • Researched hernia surgery and device requirements • Innovation Workbench • Literature research on current technologies

  6. Timeline - Current • Finalize materials list • Determine force sensor type and design circuit • Finalize mechanical system

  7. Timeline – Future • Order materials – Next week • First prototype made with acrylic • Test on porcine model – 4th week of Feb • Modify design – early March • Rebuild with surgical steel • Test new design – Late March • Report and Poster – April

  8. Force Sensors • Flexible Stretch Sensor • Changes resistance when stretched • Both ends must be wired • Requires 30-40 cords for our estimated load • All cords must be insulated

  9. Force Sensors • Flexiforce • 0-25lb (0-100N) • Conductance (1/R) linear with load • Both terminal at one end • Requires compression force • We have Starter Kit

  10. Modified Mechanics • Flexiforce measures compression • Convert tensile force to compression force • System pulls against itself

  11. Force Sensors • Strain Gage • Interlocking links • Strain gage mounted to a small piece of metal • Defected when tension applied to links • Requires Wheatstone circuit

  12. Circuit Design • Design proposed by Flexiforce • Converts change in resistance to change in voltage • Voltage will be converted to Force

  13. Calibration • Initial calibration • Known weights applied • Measure voltage output • Create calibration curve to convert to force • Simple in Labview, more difficult in self-contained circuit • Tare • Zero out capacitor to indicate zero force • Normal testing • Provide surgeons with weights to test every 5-10 uses to confirm accurate results

  14. Current Issues Federal Constraints --having minimal contact points with the body allows for easier acceptance through IRB

  15. Current Issues Physical Limitations ---with an 18cm hernia diameter, the device has to be small (~9cm, or 3.5 inches, long & 2-3 cm high) --small volume for both a movable arm and required circuitry

  16. Current Issues Mechanical Difficulties -- Need for a small internal power supply --Device for keeping tissue stationary: handles get in the way --How do we hold the moving arm in desired position while taking desired tension reading? --Lesser experience/courses in utilizing magnets or advanced techniques in electronics adds some limitations to feasible solutions for our time period.

  17. Hernia-Tensiometer Interface environment environment The system (tensiometer) needs to be self-contained, having minimal points of contact with the environment (patient) System

  18. Potential Solutions Federal Considerations • Design the system so that the clamping arm may also support the console above the patient (not on the patient) • Use stainless steel and other surgical materials that can be sterilized Experience/Time Limitations • Seek advice from Mechanical Engineering & Electrical Engineering departments on creative internal power supply sources that are currently available Physical & Mechanical Limitations • Perhaps use test-tube holders or similar alternative holding devices in place of surgical clamps • Position circuit near top of the console, and arrange force sensors near the moving arms at the base of the console

  19. References • http://multianvil.asu.edu/ASU%20Multianvil%20Page/TheCube.html • http://zone.ni.com/devzone/cda/tut/p/id/6534 • http://www.tekscan.com/flexible-force-sensors • http://www.imagesco.com/sensors/stretch-sensor.html

More Related