1 / 10

Measuring Particle Pollution ITEP Air Quality Training Lower Kalskag 2014

Measuring Particle Pollution ITEP Air Quality Training Lower Kalskag 2014. Mansel Nelson & Bob Morgan ITEP & ADEC. What Are We Measuring And Why?. Particles suspended in air that can have a significant effect on a person’s health and welfare.

renee
Télécharger la présentation

Measuring Particle Pollution ITEP Air Quality Training Lower Kalskag 2014

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Measuring Particle PollutionITEP Air Quality TrainingLower Kalskag 2014 Mansel Nelson & Bob Morgan ITEP & ADEC

  2. What Are We Measuring And Why? • Particles suspended in air that can have a significant effect on a person’s health and welfare. • In terms of protecting human health, we are measuring particles of a size range that penetrate deep into lungs.

  3. PM10 (10 µm) PM2.5 (2.5 µm) Why Size Matters PM10/ PM2.5 Hair cross section (60 µm) Human Hair (60 µmdiameter)

  4. Things That All Particulate Samplers Have In Common • Size-selective sampling inlet (which separates out large dust particles from small particles that penetrate deep into lungs) • Filter or electronic sensing device • Electronics to maintain precision flow control • Vacuum source (vacuum motor or vacuum pump)

  5. Particle Sampler Block Diagram

  6. Types Of Measurement Methods • Filter Based Methods • Automated Electronics-Based Methods

  7. Differences In Method Characteristics • Filter-Based Measurements • Requires laboratory analysis • Typically provides 24-hour avg value • Results are accurate and precise • Used for EPA-type measurements • Electronics-Based Measurements • Provides real-time results or near-real-time results • More portable (most of the time) • Good indicator of pollutant levels • Not as accurate

  8. Types Of Filter-based Samplers • PM10 Hi-Volume Sampler • PM10 Low-Volume Sampler

  9. Partisol 2000 – Filter Based Low-Volume Sampler

  10. Examples Of Automated Electronic Monitors Dust Trak™ Laser - Light Scattering Sensor Beta Attenuation Monitor (BAM)

More Related