1 / 7

Examcollection 350-080 Dumps

If you are looking to find the best exam preparation kit for 350-080 Exam then examcollectionvce can help you with their compiled test guide.They have all the relevant questions that you will be asked in the exam. Just visit our site and download the exam and pass it in the first try.<br>http://www.examcollectionvce.com/vce-350-080.html<br>

ritacat
Télécharger la présentation

Examcollection 350-080 Dumps

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Pass your Cisco350-080 exam in firstattempt http://www.examcollectionvce.com/vce-350-080.html

  2. QUESTION1: Which three capabilities make the Cisco Nexus 7010 switch an effective solution for the data center core?(Choosethree.) virtualization unifiedI/O support for 48-port Gb/s linecard support for Data Center ServiceModules highperformance highavailability Answer: B, E,F QUESTION2: FabricPath brings the benefits of routing protocols to layer 2 network Ethernet environments. What are the advantages of using FabricPath technology? (Choosethree.) FabricPath provides MAC address scalability with conversationallearning Loop mitigation with TTL in the framefield STPindependence 10 Gbpsbandwidth Layer 2 extensions between datacenters Answer: A, B,C QUESTION3: Which three concepts influenced the evolution of data centers? (Choosethree.) Consolidation Expansion Automation Virtualization Commoditization Economics

  3. Answer: A, C,D QUESTION4: A network administrator has installed an N7K-F248-25XP module into an existing chassis. The module is powered on, but the interfaces are all in VDC0. What is the reason forthis? The chassis needs an EPLD upgrade to support the new module type. The default VDC cannot support F2modules. The interfaces must be allocated into a VDC for F2 modulesonly. The module has failed GOLD diagnostics, and the switch has isolated the ports to protect the integrity of thesystem. Answer:C QUESTION5: Which two statements about SAN port channels configured on Cisco Nexus 5000 Series switches are true? (Choosetwo.) The bring up protocol automatically detects and overrides anymisconfiguration. You can manually configure channel groups, or they can be automatically created. Changes in configuration to the SAN port channel interface must also be made to all members of the channelgroup. The port channel protocol uses the exchange fabric parameters command to communicate across peer ports in anISL. The port channel protocol ensures that a set of ports is eligible to be part of the same SAN portchannel. Answer: B,E

  4. QUESTION6: Which statement about SAN port channels configured on Cisco Nexus 5000 Series Switches istrue? A single SAN port channel can have both Fibre Channel and virtual Fibre Channelinterfaces. SAN port channels can include up to 16interfaces. SAN port channels distribute traffic across all links in the port channel when source ID and destination ID load balancing areused. The links in SAN port channels can be connected to different sets ofswitches. The On mode of operation means ports only operate as part of a SAN port channel or remaininactive. Answer:E QUESTION7: Which capabilities are not supported in DCNM devicemanager? manage SNMPv3 security access toswitches save and copy configuration files and softwareimages configure VLANs and Ethernet portchannels manage 2148T FEX, 2232PP FEX, and 2248TP FEX configureFCoE Answer:C, QUESTION8: If the default VDC is configured to limit resources to a specific module type, what happens when a module that does not match the resource type isinstalled? The module is powered up, and interfaces are in an "admin down"state. The module is denied power, and a syslog message isgenerated. The module is powered up, and interfaces are allocated toVDC0. The module is powered up, and interfaces are allocated toVDC100. Answer:C

  5. QUESTION9: Which three flow-control port states lead to enabled link flow control? (Choose three.) Receive port: Enabled, Transmit port:Enabled Receive port: Enabled, Transmit port: Desired Receive port: Enabled, Transmit port:Disabled Receive port: Disabled, Transmit port: Desired Receive port: Desired, Transmit port:Desired Answer: A, B,E QUESTION10: In a configuration with redundant supervisors, how many IP addresses are required to configure full remote access via management0? Two IP addresses, one for eachsupervisor Three IP addresses, one virtual IP and one physical IP for eachsupervisor One IP address that is shared amongsupervisors None--management 0 will use the IP address from the first SVI that iscreated Answer:C

  6. 100% MoneyBack Guarantee 100%Latest examcollection350- 080 Dumps PDF & TestEngine 6 MonthsCisco Exam VCE Update 100%Passing Guarantee

  7. Get a Complete file fromhere: http://www.examcollectionvce.com/vce-350-080.html

More Related