1 / 5

THE 2,500 METRE ISOBATH (CHAPTER 4)

THE 2,500 METRE ISOBATH (CHAPTER 4). Harald Brekke. The role of the 2,500 m isobath.

rivka
Télécharger la présentation

THE 2,500 METRE ISOBATH (CHAPTER 4)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. THE 2,500 METRE ISOBATH (CHAPTER 4) Harald Brekke

  2. The role of the 2,500 m isobath • The fixed points comprising the line of the outer limits of the continental shelf on the sea-bed, drawn in accordance with paragraph 4 (a) (i ) and (ii), either shall not exceed 350 nautical miles from the baselines ….. or shall not exceed 100 nautical miles from the 2,500 metre isobath, which is a line connecting the depth of 2,500 metres” (Paragraph 5, article 76)

  3. Relevant bathymetric data Primary data: - Single-beam echo soundings - Multi-beam echo soundings Complementary data: - Bathymetric side-scan sonar measurements - Interferometric side-scan sonar measurements - Seismic reflection-derived bathymetric measurements (See 4.2.1 - 2)

  4. Ice-covered areas • In special cases such as in ice-covered areas the CLCS may regard also the following as primary data: • Seismic reflection-derived bathymetric measurements • Interferometric side-scan sonar measurements (See 4.2.3)

  5. Selection of points along 2,500 m isobath for delineating the 100 M maximum limit • The 2,500 m isobath may occur as multiple repetitions along the continental margin • Use the first 2,500 m isobath from the baselines that conforms to the general configuration of the continental margin, unless there is evidence to the contrary (See 4.4.2)

More Related