1 / 11

Topics

MECH 1200. Topics. Introduction Terminology Thread Specifications Bolts and Screws Nuts and Locking Devices Exercise Questions Note: Refer to Chapter 6 in the text. MECH 1200. Introduction. There are two thread standards :

rmaguire
Télécharger la présentation

Topics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MECH 1200 Topics • Introduction • Terminology • Thread Specifications • Bolts and Screws • Nuts and Locking Devices • Exercise Questions • Note: Refer to Chapter 6 in the text.

  2. MECH 1200 Introduction • There are two thread standards: • The Unified Screw Thread Standard: Used in the U.S. It is based on a 60o thread angle. • Unified National Coarse (UNC) series: this is the most common series. Bolts, screws, and nuts of this series are used for general applications in which a quick assembly is required. • Unified National Fine (UNF) series: threads of this series are used for handling high tensile stresses, or when the length of engagement is limited such as screws in thin walls. • Unified National Special (UNS) series • The International Screw Thread Standard: most common standard, based also on the 60o thread angle.

  3. MECH 1200 Terminology • Thread angle: the angle included between the sides of the thread, The ISO thread angle is 60 degrees. • Pitch: the distance between one point on a thread to the corresponding point on the next thread. • Number of threads per inch • Minor (root) diameter • Major (Outside) diameter • Lead: the distance a screw thread advances in one revolution. • Thread Fit: How tight is the thread engagement. Three classes of fit are used in the unified system, loose, medium, and tight fits. A for external and B for internal fits. (see p. 110) Source: Siemens TechnikAkademie Berlin

  4. MECH 1200 Thread Specifications • Unified system threads: • Example: ¼ - 20 UNC-BX1 indicates a thread with an outer diameter is ¼ inch, with 20 threads per inch, the type of thread is UNC, and a B (internal) fit and a thread length of 1 inch. • Metric system threads: • Example: M10 1.5-6g indicates a Metric thread with an outside diameter of 10 mm and a pitch of 1.5 mm, the fit of the thread is 6g. Bolts and Screws: The two words are used interchangeably, but generally, bolt is used when a nut is required to be used. The shank of a bolt has a diameter that is equal to the major diameter. Source: Siemens TechnikAkademie Berlin

  5. MECH 1200 Common Bolts and Screws

  6. MECH 1200 Source of images in this slide: Siemens TechnikAkademie Berlin

  7. MECH 1200 Nuts Hex nuts: Have a hexagonal shape, and has different grades Castle Nut: Named so because it looks like a castle, used in applications where heavy vibrations occur, such as on wheels. Can handle light torques.only. Wing nuts Cap (Acorn) Nut

  8. MECH 1200 Fastener Locking Devices • Screw locking devices are used to keep the nut from getting loose. • They can be friction based or non-friction based: Friction based Locking devices Internal tooth lock washer External tooth lock washer Spring lock washer Lock washer Safety wires Non-Friction based Locking devices Split pins Nut lock plate Tab washer

  9. MECH 1200 Exercise Questions • What are the two thread standards? The Unified Screw Thread System and the ISO metric thread standard. • Thoroughly describe the bolt given by: ¼ - 28 UNF 2A The bolt has an outer diameter of ¼ inch and a fine thread of 28 threads per inch (Unified National Fine thread series) and has a medium fit with external thread. • Thoroughly describe the thread bolt given by: M10 x 1.25 The bolt is metric and its outer diameter is 10 mm and has a pitch of 1.25 mm

  10. MECH 1200 • If a thread has 40 threads per inch what is its pitch? Pitch = 1 inch / 40 = 0.025 • Is each of the screw locking devices below friction based or not? Yes Yes No No No

  11. MECH 1200 • What is the component shown in the figure below? Castle Nut: used in applications that require low amount of torque, and where vibrations are common.

More Related