1 / 1

Major Tool and Machine’s NCSX Prototype Vacuum Vessel (PVVS)

Major Tool and Machine’s NCSX Prototype Vacuum Vessel (PVVS). Dies for each plate were first machined out of blocks of Kirksite. A 500 ton press was used to form the panels. The panels were mounted on a fixture to hold the shape and welded together.

ronald
Télécharger la présentation

Major Tool and Machine’s NCSX Prototype Vacuum Vessel (PVVS)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Major Tool and Machine’s NCSX Prototype Vacuum Vessel (PVVS) • Dies for each plate were first machined out of blocks of Kirksite. • A 500 ton press was used to form the panels. • The panels were mounted on a fixture to hold the shape and welded together. • The tube was welded on, leak checked, cut off, and rewelded on. • The part was polished and final measurements were taken. The PVVS was completed within +/- 3/16”

More Related