1 / 48

CE-632 Foundation Analysis and Design

CE-632 Foundation Analysis and Design. Instructor: Dr. Amit Prashant, FB 304, PH# 6054. E-mail: aprashan@iitk.ac.in. Reference Books. Grading Policy. Two 60-min Mid Semester Exams ……. 30% End Semester Exam ……………........... 40% Assignment ……………………………… 10%

ryder
Télécharger la présentation

CE-632 Foundation Analysis and Design

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CE-632Foundation Analysis and Design Instructor: Dr. Amit Prashant, FB 304, PH# 6054. E-mail: aprashan@iitk.ac.in

  2. Reference Books

  3. Grading Policy • Two 60-min Mid Semester Exams ……. 30% • End Semester Exam ……………........... 40% • Assignment ……………………………… 10% • Projects/ Term Paper -…………………… 20% TOTAL 100% Course Website: http://home.iitk.ac.in/~aprashan/ce632/

  4. Soil Mechanics Review • Soil behavour is complex: • Anisotropic • Non-homogeneous • Non-linear • Stress and stress history dependant • Complexity gives rise to importance of: • Theory • Lab tests • Field tests • Empirical relations • Computer applications • Experience, Judgement, FOS

  5. Soil Texture • Particle size, shape and size distribution • Coarse-textured (Gravel, Sand) • Fine-textured (Silt, Clay) • Visibility by the naked eye (0.05mm is the approx limit) • Particle size distribution • Sieve/Mechanical analysis or Gradation Test • Hydrometer analysis for smaller than .05 to .075 mm (#200 US Standard sieve) • Particle size distribution curves • Well graded • Poorly graded

  6. Effect of Particle size

  7. Basic Volume/Mass Relationships

  8. Additional Phase Relationships Typical Values of Parameters:

  9. Atterberg Limits • Liquid limit (LL): the water content, in percent, at which the soil changes from a liquid to a plastic state. • Plastic limit (PL): the water content, in percent, at which the soil changes from a plastic to a semisolid state. • Shrinkage limit (SL): the water content, in percent, at which the soil changes from a semisolid to a solid state. • Plasticity index (PI): the difference between the liquid limit and plastic limit of a soil, PI = LL – PL.

  10. Clay Mineralogy • Clay fraction, clay size particles Particle size < 2 µm (.002 mm) Clay minerals Kaolinite, Illite, Montmorillonite (Smectite) - negatively charged, large surface areas Non-clay minerals - e.g. finely ground quartz, feldspar or mica of "clay" size • Implication of the clay particle surface being negatively charged double layer Exchangeable ions - Li+<Na+<H+<K+<NH4+<<Mg++<Ca++<<Al+++ - Valance, Size of Hydrated cation, Concentration Thickness of double layer decreases when replaced by higher valence cation - higher potential to have flocculated structure When double layer is larger swelling and shrinking potential is larger

  11. Clay Mineralogy • Soils containing clay minerals tend to be cohesive and plastic. • Given the existence of a double layer, clay minerals have an affinity for water and hence has a potential for swelling (e.g. during wet season) and shrinking (e.g. during dry season). Smectites such as Montmorillonite have the highest potential, Kaolinite has the lowest. • Generally, a flocculated soil has higher strength, lower compressibility and higher permeability compared to a non-flocculated soil. • Sands and gravels (cohesionless ) : Relative density can be used to compare the same soil. However, the fabric may be different for a given relative density and hence the behaviour.

  12. Soil Classification Systems Classification may be based on – grain size, genesis, Atterberg Limits, behaviour, etc. In Engineering, descriptive or behaviour based classification is more useful than genetic classification. • American Assoc of State Highway & Transportation Officials (AASHTO) • Originally proposed in 1945 • Classification system based on eight major groups (A-1 to A-8) and a group index • Based on grain size distribution, liquid limit and plasticity indices • Mainly used for highway subgrades in USA • Unified Soil Classification System (UCS) • Originally proposed in 1942 by A. Casagrande • Classification system pursuant to ASTM Designation D-2487 • Classification system based on group symbols and group names • The USCS is used in most geotechnical work in Canada

  13. Soil Classification Systems • Group symbols: G - gravel S - sand M - silt C - clay O - organic silts and clay Pt - peat and highly organic soils H - high plasticity L - low plasticity W - well graded P - poorly graded • Group names: several descriptions Plasticity Chart

  14. Grain Size Distribution Curve Gravel: Sand:

  15. Permeability • Flow through soils affect several material properties such as shear strength and compressibility • If there were no water in soil, there would be no geotechnical engineeringDarcy’s Law • Developed in 1856 • Unit flow, Where: K = hydraulic conductivity ∆h =difference in piezometric or “total” head ∆L = length along the drainage path Definition of Darcy’s Law Darcy’s law is valid for laminar flowReynolds Number: Re < 1 for ground water flow

  16. Permeability of Stratified Soil

  17. Seepage • 1-D Seepage: Q = k i A where, i = hydraulic gradient =∆h /∆L ∆h = change in TOTAL head Downward seepage increases effective stress Upward seepage decreases effective stress • 2-D Seepage (flow nets)

  18. Effective Stress • Effective stress is defined as the effective pressure that occurs at a specific point within a soil profile • The total stress is carried partially by the pore water and partially by the soil solids, the effective stress, σ’, is defined as the total stress, σt, minus the pore water pressure, u, σ' = σ − u

  19. Effective Stress • Changes in effective stress is responsible for volume change • The effective stress is responsible for producing frictional resistance between the soil solids • Therefore, effective stress is an important concept in geotechnical engineering • Overconsolidation ratio,Where: σ´c = preconsolidation pressure • Critical hydraulic gradient σ′ = 0 when i = (γb-γw) /γw → σ′ = 0

  20. Effective Stress Profile in Soil Deposit

  21. Example Determine the effective stress distribution with depth if the head in the gravel layer is a) 2 m below ground surface b) 4 m below ground surface; and c) at the ground surface. • set a datum • evaluate distribution of total head with depth • subtract elevation head from total head to yield pressure head • calculate distribution with depth of vertical “total stress” • subtract pore pressure (=pressure head x γw) from total stress Steps in solving seepage and effective stress problems:

  22. Vertical Stress Increase with Depth • Allowable settlement, usually set by building codes, may control the allowable bearing capacity • The vertical stress increase with depth must be determined to calculate the amount of settlement that a foundation may undergo Stress due to a Point Load • In 1885, Boussinesq developed a mathematical relationship for vertical stress increase with depth inside a homogenous, elastic and isotropic material from point loads as follows:

  23. Vertical Stress Increase with Depth • For the previous solution, material properties such as Poisson’s ratio and modulus of elasticity do not influence the stress increase with depth, i.e. stress increase with depth is a function of geometry only. • Boussinesq’s Solution for point load-

  24. Stress due to a Circular Load • The Boussinesq Equation as stated above may be used to derive a relationship for stress increase below the center of the footing from a flexible circular loaded area:

  25. Stress due to a Circular Load

  26. Stress due to Rectangular Load • The Boussinesq Equation may also be used to derive a relationship for stress increase below the corner of the footing from a flexible rectangular loaded area: Concept of superposition may also be employed to find the stresses at various locations.

  27. Newmark’s Influence Chart • The Newmark’s Influence Chart method consists of concentric circles drawn to scale, each square contributes a fraction of the stress • In most charts each square contributes 1/200 (or 0.005) units of stress (influence value, IV) • Follow the 5 steps to determine the stress increase: • Determine the depth, z, where you wish to calculate the stress increase • Adopt a scale of z=AB • Draw the footing to scale and place the point of interest over the center of the chart • Count the number of elements that fall inside the footing, N • Calculate the stress increase as:

  28. Simplified Methods • The 2:1 method is an approximate method of calculating the apparent “dissipation” of stress with depth by averaging the stress increment onto an increasingly bigger loaded area based on 2V:1H. • This method assumes that the stress increment is constant across the area (B+z)·(L+z) and equals zero outside this area. • The method employs simple geometry of an increase in stress proportional to a slope of 2 vertical to 1 horizontal • According to the method, the increase in stress is calculated as follows:

  29. Consolidation • Settlement – total amount of settlement • Consolidation – time dependent settlement • Consolidation occurs during the drainage of pore water caused by excess pore water pressure

  30. Settlement Calculations • Settlement is calculated using the change in void ratio

  31. Settlement Calculations

  32. Example

  33. Consolidation Calculations • Consolidation is calculated using Terzaghi’s one dimensional consolidation theory • Need to determine the rate of dissipation of excess pore water pressures

  34. Consolidation Calculations

  35. Example

  36. Shear Strength • Soil strength is measured in terms of shear resistance • Shear resistance is developed on the soil particle contacts • Failure occurs in a material when the normal stress and the shear stress reach some limiting combination

  37. Direct shear test • Simple, inexpensive, limited configurations

  38. Triaxial Test may be complex, expensive, several configurations Consolidated Drained Test

  39. Triaxial Test Undrained Loading (f= 0 Concept) • Total stress change is the same as the pore water pressure increase in undrained loading, i.e. no change in effective stress • Changes in total stress do not change the shear strength in undrained loading

  40. Stress-Strain Relationships

  41. Failure Envelope for Clays

  42. Unconfined Compression Test • A special type of unconsolidated-undrained triaxial test in which the confining pressure, σ3, is set to zero • The axial stress at failure is referred to the unconfined compressive strength, qu (not to be confused with qu) • The unconfined shear strength, cu, may be defined as,

  43. Stress Path

  44. Elastic Properties of Soil

  45. Elastic Properties of Soil

  46. Hyperbolic Model Empirical Correlations for cohesive soils

  47. Anisotropic Soil Masses Generalized Hook’s Law for cross-anisotropic material Five elastic parameters

More Related